Page 126 of 465
0-30
RODIUS 2006.09
0000-00
ENGINE GENERAL
2) Preheat System
Page 127 of 465
0-31
ENGINE GENERAL
RODIUS 2006.09
0000-00
3) Fuel System
Page 128 of 465
0-32
RODIUS 2006.09
0000-00
ENGINE GENERAL
▶Fuel Supply System
Page 129 of 465
0-33
ENGINE GENERAL
RODIUS 2006.09
0000-00
4) Lubrication System
Page 130 of 465
0-34
RODIUS 2006.09
0000-00
ENGINE GENERAL
5) Cooling System
Page 131 of 465
0-35
ENGINE GENERAL
RODIUS 2006.09
0000-00
6) Intake System
Page 132 of 465
0-36
RODIUS 2006.09
0000-00
ENGINE GENERAL
7) Exhaust System
Page 133 of 465
0-3
ENGINE FUEL SYSTEM
RODIUS 2006.09
0000-00
1881-09ENGINE FUEL SYSTEM
MAJOR CHANGES IN FUEL SYSTEM OF D27DTP
(POWER UP) ENGINE 1.
There are some changes in the parts related to the fuel system due to the newly adopted
D27DTP (POWER UP) engine. The major changes are as follows. Refer to the next pages fo
r
further details.
1) Injector
Two nozzle holes are added (currently 7)
to the tip of the injector to increase the
amount of fuel injection and to improve
injection efficiency according to the
increased engine power.
The existing C2I coding (16 digits) is
changed to C3I coding (20 digits) to
monitor fuel injection and follow the
target value.
For the D27DT engine, the injector MDP
(minumum current for the solenoid in the
injector to lift the nozzle) is leaned only
when the engine is running. However, fo
r
the D27DTP engine, it is learned when
the vehicle is in motion and the engine is
at idle speed. ·
·
· D27DTP & D27DT (EU IV)
D27DT