2007 SKODA OCTAVIA TOUR service

[x] Cancel search: service

Page 2 of 205

SKODA OCTAVIA TOUR 2007 1.G / (1U) Owners Manual 1
You have opted for a Škoda,
sincere thanks for your confidence.Your Škoda has proven to be a successful car for all-round use.
Functionality, customer satisfaction and environmental protection
asp

Page 49 of 205

SKODA OCTAVIA TOUR 2007 1.G / (1U) Owners Manual 48CONTROLS AND EQUIPMENT
InstrumentsThe positioning of the instruments depends
on the particular model and engine versi-
on.
1 - Rev counter .................................. 48
2 - Coolant temperatu

Page 50 of 205

SKODA OCTAVIA TOUR 2007 1.G / (1U) Owners Manual 49
CONTROLS AND EQUIPMENT
3 - Fuel gaugeThe gauge starts to work when the ignition
is switched on.
The fuel tank holds about 55 litres.
If the warning lamp comes on, there are still
about 7 litres of

Page 51 of 205

SKODA OCTAVIA TOUR 2007 1.G / (1U) Owners Manual 50CONTROLS AND EQUIPMENTNote
Do not reset the readout between ser-
vice intervals, otherwise an incorrect rea-
dout will be displayed.
 The information is retained even if the
vehicle battery is dis

Page 55 of 205

SKODA OCTAVIA TOUR 2007 1.G / (1U) Owners Manual 54CONTROLS AND EQUIPMENTThe following information (depending on
the vehicle equipment) appears in the lar-
ge or small display:
- Information and warning texts
- Information of MFD - see page 50
- War

Page 59 of 205

SKODA OCTAVIA TOUR 2007 1.G / (1U) Owners Manual 58CONTROLS AND EQUIPMENTCoolant temperature, coolant
levelThe warning light comes on for a few se-
conds after switching on the ignition.
On vehicles with information display, the
warning light does n

Page 60 of 205

SKODA OCTAVIA TOUR 2007 1.G / (1U) Owners Manual 59
CONTROLS AND EQUIPMENT
Engine oilWarning light shows red
(engine oil level too low)
The warning light comes on for a few se-
conds when the ignition is switched on.
On vehicles with information dis

Page 120 of 205

SKODA OCTAVIA TOUR 2007 1.G / (1U) Owners Manual 119
DRIVING TIPS
The technical prerequisites
for low fuel consumption and efficiency we-
re „built in“ at the factory. Particular impor-
tance was placed on the lowest possible
effect on the envir
Page:   1-8 9-16 17-24 next >