Page 20 of 205

19
CONTROLS AND EQUIPMENT
Front seatsCorrect seat adjustment is important for:
- reliably and quickly reaching the controlsand switches,
- relaxed, fatigue-free body position,
- maximum protection from the seat belts.
Warning
For this reason, the front seats
should not be pushed too close to
the steering wheel or the instrument
panel.
Each occupant must correctly fas-
ten the seat belt belonging to the
seat. Children must be fastened with
a suitable restraint system - see page
111 .
The front seats and the head re-
straints must always be adjusted to
match the body size of the seat oc-
cupant. The seat belts must always
be correctly fastened in order to pro-
vide an optimal protection for you
and your occupants.
Always keep your feet in the foot-
well when the vehicle is moving - ne-
ver rest them on the instrument panel
or seats.
Never transport more occupants
than the maximum seating in the ve-
hicle.
1 - To move seat forward and back
Pull up the lever located below the seat and
move seat into the desired position. Then,
release lever and move seat further until
the lock engages.
The driver’s seat should be adjusted so that
the pedals can be fully depressed with the
legs slightly angled. Warning
For safety reasons the driver’s seat
must only be moved forward or back
when the vehicle is stationary!
2 - Adjusting seat height*
Move the lever repeatedly up and down in
the top position in order to raise the seat.
Move the lever repeatedly up and down in
the bottom position in order to lower the
seat. Warning
For safety reasons the height of the
driver’s seat must only be adjusted
when the vehicle is stationary!
Page 21 of 205
20CONTROLS AND EQUIPMENT3 - Adjusting backrest angle
To adjust the backrest, take weight off back-
rest and then turn knob.
The backrest of the driver’s seat should be
adjusted so that the top of the steering
wheel can be reached with the arms slightly
angled.Warning
Do not lower the backrest too far
when travelling otherwise the protec-
tion offered by the seat belts will be
adversely affected.
Electrically operated seat*Electric seat adjustmentThe seat is positioned electrically with
switches A and B.
The seat can also be positioned when the
ignition is switched on.
The backrest of the seat is positioned
mechanically by turning the wheel C.
4 - Adjusting lumbar support*
The seat padding in the lumbar area of the
spine can be made to arch forward slightly
by turning the handwheel. This offers ef-
fective support to the natural curvature of
the spine. The sitting position is less fatigu-
ing, particularly on long trips.
Page 25 of 205

24CONTROLS AND EQUIPMENT„Multi-touch memory retrieval“: With the
driver door opened or closed, continuous-
ly press the desired memory button D until
the seat and exterior mirrors have moved
into the stored position.
Note
If one of the memory buttons is once again
pressed during the automatic adjustment
of the seat and exterior mirrors, the retrie-
val process is interrupted. In this case,
again press the key which you pressed first
in order to continue the interrupted retrie-
val process. If, on the other hand, you press
one of the other two buttons, the seat and
mirrors will then move to the positions
stored with these buttons.
Retrieving with the remote control*
You can only retrieve the stored seat and
mirror settings if the ignition is switched
off and the driver door is closed:
Briefly press the opening button of the re-
mote control key - see page 9, and then
open the driver door.
The seat and the exterior mirrors now move
automatically into the stored positions.
Notes on use of the lock switch E After the lock switch E is pressed (re-
leased), the memory system is permanently
switched off. You can now set the seat and
the exterior mirrors only manually. You can
switch on the memory system again by
once again pressing the lock switch E. If a
retrieval process was interrupted when this
switch was first pressed, the process is not
continued .
We recommend switching off the memo-
ry system with the lock switch E if the car is
to be driven for a short time by a person for
whom you do not wish to store the individual
seat and mirror settings.
Retrieving exterior mirror setting for re-
versing*
When reverse gear is engaged, switch over
operation of the exterior mirror settings to
position
R - refer to p. 17.
Page 96 of 205

95
SAFETY
Adjust the backrest so that you are able
to reach the highest point of the steering
wheel with your arms at a slight angle.
Adjust the head restraint so that the top
edge of the head restraint is at the same
level as the upper part of your head - see
illustration.
Fasten the seat belt correctly - see page
100.
Driver seat adjustment - see page 19. Warning
The front seats and the head re-
straints must always be adjusted to
match the body size of the seat oc-
cupant. The seat belts must always
be correctly fastened in order to pro-
vide an optimal protection for you
and your occupants.
The driver must maintain a distance
of at least 25 cm to the steering wheel -
see illustration on page 94.
If you do not maintain this minimum
distance, the airbag system will not
be able to protect you - hazard!
When driving, hold the steering
wheel with both hands firmly on the
outer edge in the 9 o’clock and 3
o’clock position.
Never hold the steering wheel firmly
in the 12 o’clock position or in an-
other way (e.g. in the middle of the
steering wheel or at the inner steer-
ing wheel edge).
When driving, the backrests must
not be angled too far back, otherwise
this will affect proper operation of the
seat belts and of the airbag system -
risk of injury!
Correct seated position for the
front passengerThe front passenger must maintain a
distance of at least 25 cm from the dash
panel so that the airbag offers the great-
est possible safety when an airbag is
deployed.
For the safety of the front passenger and
to reduce the risk of injury in the event of
an accident, we recommend the following
setting:
Adjust the front passenger seat as far
as possible to the rear.
Adjust the head restraint so that the top
edge of the head restraint is at the same
level as the upper part of your head - see
illustration on page 95.
Fasten the seat belt correctly - see page
100.
In exceptional cases the front passenger
airbag can be deactivated - see page 107.
Front passenger seat adjustment - see
page 19.