2007 SKODA OCTAVIA TOUR seat memory

22CONTROLS AND EQUIPMENTMemory for driver’s seatThe memory of your driver’s seat offers the
possibility of storing your own individual
settings for the seat and exterior mirrors. It
is possible to store the individual settings
for up to three drivers in each case using
the memory button D. If another person
drives the car, it is then only necessary to
press button D for the seat and exterior
mirrors to be set automatically to the indi-
vidually programmed position. Memory button
D can be used to store and
retrieve the
- individual settings of the driver’s seat,
- Storing and retrieving exterior mirror settings (on left and right) for driving
forward , or exterior mirror setting (on
right) for reversing.
In addition, you can use the keys of the
remote control* to retrieve the stored set-
tings of a memory button.
The memory system can be switched off at
any time with the lock switch E. The seat
and the exterior mirrors can then only be
adjusted manually.
Storing seat and mirror settings for
driving forward
Switch the ignition on.

Adjust the seat - see pages 20 and 21.

Adjust both exterior mirrors - see page
16.

Press one of the memory buttons D and
hold the button for about three seconds until
an audible signal confirms that the settings
have been stored.
The settings are then stored under the
memory button selected.
Storing exterior mirror setting for
reversing*
Switch the ignition on.

Switch over operation of the exterior
mirror to position R.

Shift into reverse gear.

Position the exterior mirror on the right
into the desired setting - refer to p. 17.

Press one of the memory buttons D and
hold the button for about three seconds until
an audible signal confirms that the setting
has been stored.
The settings are stored under the selected
memory button.
Notes

We recommend beginning with the left-
hand button for the memory assignment
and allocating a memory button to each
additional driver.

Each new setting which is stored with the
same button cancels the previous setting.

Each time new settings are stored for the
seat and mirrors for driving forward, it is
also necessary to re-store the individual
setting of the right-hand exterior mirror for
reversing.

23
CONTROLS AND EQUIPMENT
Assigning remote control keys* to
the memory buttonsIf you wish to be able to retrieve the set-
tings stored in the memory using the remote
control key, you must assign the keys to a
particular memory button.
We recommend assigning one of the two
factory-supplied remote control keys to the
left-hand memory button and the other keys
to the middle button.
You can obtain an additional remote con-
trol key, if necessary, from your Škoda Dea-
ler and then assign it to the right-hand
memory button.Carry out the following procedure
to assign the remote control keys:After storing the settings of the driver’s seat
and mirrors, you have 10 seconds to as-
sign the remote control key to the corre-
sponding memory.

Withdraw the remote control key from
the ignition lock for this purpose.

Press the opening button of the remote
control key - see page 12 and hold the but-
ton for about one second until an audible
signal confirms the assignment has been
made.
The setting is stored under the memory
button you selected.
Notes

If the remote control key has already
been assigned to another memory button,
the „old“ assignment is cancelled.

If the remote control key is assigned to
a memory button which has already been
assigned to another key, the „old“ assign-
ment is also cancelled in this case.

The assignment of a remote control key
to a memory button is retained even if you
store new seat and mirror settings with this
button.
Retrieving seat and mirror settings
for driving forwardYou can retrieve the stored settings by us-
ing the memory buttons D as well as the
remote control*.
Retrieving with the memory buttons
For safety reasons, you are able to retrie-
ve the seat and memory settings only if the
ignition is switched off . You have two
possibilities for retrieving the settings in this
case:
„One-touch automatic memory“: With the
driver door opened, briefly press on the
desired memory button D. The seat and
exterior mirrors now move automatically
into the stored position.

24CONTROLS AND EQUIPMENT„Multi-touch memory retrieval“: With the
driver door opened or closed, continuous-
ly press the desired memory button D until
the seat and exterior mirrors have moved
into the stored position.
Note
If one of the memory buttons is once again
pressed during the automatic adjustment
of the seat and exterior mirrors, the retrie-
val process is interrupted. In this case,
again press the key which you pressed first
in order to continue the interrupted retrie-
val process. If, on the other hand, you press
one of the other two buttons, the seat and
mirrors will then move to the positions
stored with these buttons.
Retrieving with the remote control*
You can only retrieve the stored seat and
mirror settings if the ignition is switched
off and the driver door is closed:
Briefly press the opening button of the re-
mote control key - see page 9, and then
open the driver door.
The seat and the exterior mirrors now move
automatically into the stored positions.
Notes on use of the lock switch E
After the lock switch E is pressed (re-
leased), the memory system is permanently
switched off. You can now set the seat and
the exterior mirrors only manually. You can
switch on the memory system again by
once again pressing the lock switch E. If a
retrieval process was interrupted when this
switch was first pressed, the process is not
continued .

We recommend switching off the memo-
ry system with the lock switch E if the car is
to be driven for a short time by a person for
whom you do not wish to store the individual
seat and mirror settings.
Retrieving exterior mirror setting for re-
versing*
When reverse gear is engaged, switch over
operation of the exterior mirror settings to
position
R - refer to p. 17.

25
CONTROLS AND EQUIPMENT
Emergency offIn an emergency, the memory retrieval
process can be interrupted by pressing
(releasing) the lock switch E, briefly
pressing one of the memory buttons or
pressing one of the seat setting swit-
ches.
Rear seatThe rear seat can be folded forward in or-
der to increase the available luggage spa-
ce.
Before folding the seat backrest down, it is
necessary to adjust the front seats and the
armrests so that after folding down the arm-
rests and the backrests of the front and rear
seat are not deformed or damaged.
Folding rear seat forward
Pull up seat cushion with the aid of the
loop and fold forward.

Pull release knob up and fold backrest
of rear seat forward slightly.

Remove head restraints from backrest
of rear seat and fold the backrest fully for-
ward.

The head restraints can be inserted into
the openings of the backrest when it is fol-
ded forward.