POWER-ASSISTED STEERING
Fault finding – Fault Finding Chart
36B
36B-50V5 MR-372-J84-36B000$924_fra.mif
EPAS
Vdiag no.: 05, 09,
0D
ALP3 Poor vehicle handling
NOTESOnly consult this customer complaint after a complete check with the diagnostic tool.
Check the pressure and condition of the tyres, the condition of the joints and the front axle geometry.
Check the vehicle battery voltage and the condition of the battery terminals.
Repair if necessary.
Check the status and presence of the Electric Power Steering system power supply fuse.
Repair if necessary.
Check the insulation, continuity and absence of interference resistance on the wiring harness between the
battery and the 2-track EPAS connector.
Repair if necessary.
Check that status ET026 Computer calibration corresponds to the vehicle equipment.
Configure the computer correctly using the diagnostic tool, if necessary (see Configuration and Programming).
If the fault is still present, contact the Techline.
AFTER REPAIRPerform a test using the diagnostic tool.
DAE_V05_ALP3/DAE_V09_ALP3/DAE_V0D_ALP3
