2007 RENAULT SCENIC Electrical Equipment - Radio Workshop Manual

RADIO
Fault finding chart
86A
86A - 25V2 MR-372-J84-86A000$792_eng.mif
ALP 8Lighting does not change when the vehicle lights are switched on
Lighting does not change when the
vehicle lights are switched on.
Check for + 12 V on connection LPG
(only lights are on).
No
Is there + 12 V feed?
Yes
Replace the radio. The fault is not associated with
the audio equipment. Check the
continuity and insulation of
connection LPG using a
multimeter (See Wiring
diagrams Technical Note,
vehicle, code 261).
No
Test OK?Replace the wiring or repair it if
the procedure exists
Yes

RADIO
Fault finding chart
86A
86A - 26V2 MR-372-J84-86A000$792_eng.mif
ALP 9No sound muting during Carminat messages,
voice synthesiser or hands-free kit
No muting of sound during messages.
Check for earth on connection 107D
(See Wiring diagrams Technical
Note, vehicle, code 261) during
messages only.
No
Is there an earth?
Yes
Replace the radio. The fault is not associated with
the radio. Check the continuity
and insulation of connection
107D using a multimeter.
No
Test OK?Replace the wiring or repair it if
the procedure exists
Yes

RADIO
Fault finding chart
86A
86A - 27V2 MR-372-J84-86A000$792_eng.mif
ALP 10 The infrared remote control does not operate (PN6)
The infrared remote control does not
work. Check the continuity and
insulation of connections 34GH and
34GK (between the radio and
instrument panel see wiring
diagrams Technical Note, vehicle,
code 261).
No
Are the connections
sound?Replace the wiring or repair it if
the procedure exists.
Yes
Connect a multimeter to connection 34GH
and check that a voltage change occurs
when pressing the remote control.
Test OK?No Check that the battery
is sound.
Yes
Replace the radio. Test OK?No
Replace the
battery.
Yes
Replace the remote control. Connect a multimeter to
connection 34GH and check for 0V on the connection
when pressing the remote control.
Test OK?No Replace the
instrument
panel.
Yes
Replace the remote control.

RADIO
Recovering a jammed CD
86A
86A - 28V2 MR-372-J84-86A000$891_eng.mif
RADIO
Recovering a jammed CD
First solution
If the electric ejector motor is operational, eject the CD
using a 4.5 V battery to supply the electric motor (B)
(attach the + wire to contact (1) and the - wire to
contact (2) when ejecting the CD).
RADIO
MR-372-J84-86A000$891_eng.mif

RADIO
Recovering a jammed CD
86A
86A - 29V2 MR-372-J84-86A000$891_eng.mif
Second solution
If the electric ejector motor is not operational, remove
the bolt (C) and release the electric motor (B).
Turn toothed wheel (D) by hand in a clockwise
direction until the CD is ejected.Before replacing the radio:
●refit the electric motor and attach it using the bolt
(second solution only),
●refit the casing.
RADIO

RADIO
Recovering a jammed CD
86A
86A - 30V2 MR-372-J84-86A000$891_eng.mif
REMOVAL
Remove the two bolts (A).
Turn the CD changer upside down.
Remove the 6 bolts (B).Turn the CD changer upside down.
Remove the cover.
Remove the mechanism from its housing.
CHANGER IN THE DASHBOARD

RADIO
Recovering a jammed CD
86A
86A - 31V2 MR-372-J84-86A000$891_eng.mif
Remove the two bolts (C).
Remove the CD guide arm.
Disconnect connector (D).Remove the eight bolts (E),
Remove both clips from the two connectors.
CHANGER IN THE DASHBOARD

RADIO
Recovering a jammed CD
86A
86A - 32V2 MR-372-J84-86A000$891_eng.mif
Remove both ribbon cables.
Remove the upper section of mechanism.Turn the guides and push the mechanism as shown in
the diagram in order to raise or lower the CDs.
The CDs can now be accessed.
CHANGER IN THE DASHBOARD
IMPORTANT
Never refit the changer mechanism once it has been
removed.