2007 RENAULT SCENIC buttons

RADIO
General Information
86A
86A - 4V2 MR-372-J84-86A000$099_eng.mif
The radio features allow you to:
–listen to the radio (four geographical zones can be
programmed for FM radio)
–display the name of the station using RDS which
automatically switches to the best transmitter (AF
function),
–receive traffic news (I Traffic function),
–receive news flashes and emergency bulletins
(I News function).
–receive public safety emergency bulletins (PTY 31).
RADIO FUNCTION
The tuner has three selection modes displayed on the
screen and accessible from the radio front panel:
–manual mode (MANU),
–preset mode (PRESET),
–alphabetical mode (LIST).CASSETTE FUNCTION
The cassette plays automatically once cassette mode
has been selected using the steering wheel control or
the front panel.
Only the Dolby fast-forward and rewind with search
controls can be selected by specific buttons.
CD FUNCTION
The CD player can play conventional discs and any
audio tracks on a CD-ROM.
CDs can be played in order or tracks can be chosen at
random.
If a CD changer is being used, random play is possible
on only one of the possible 6 compact discs.
THERMAL PROTECTION
If the radio temperature is too high for it to function
properly, the volume is automatically reduced (without
changing the volume shown in the display).
Should one of the speaker tracks short circuit, the
supply to the amplifier will be cut off.Note:
The Mute function, accessed via the voice
synthesiser or the steering wheel control, stops the
cassette playing.

RADIO
Security code recovery procedure
86A
86A - 6V2 MR-372-J84-86A000$198_eng.mif
RADIO
Security code recovery procedure
2 methods for recovering the pre-code (1 letter and 3 digits):
1For PN type radios:
The pre-code is recovered by removing the RECEIVER and noting the four characters on the barcode that
follow the letter T (see photo no. 114936).
On older versions, note the series number at (B) and the pre-code after the letter T at (C).
2For NR type radios
The pre-code is recovered without removal, by applying the following procedure:
●Switch on the radio.
●Press buttons 1 and 6 simultaneously for approximately 2 seconds.
●The pre-code appears on the display.
Note: on NR type radios, the pre-code remains visible at (A) on the radio (see photo no. 114937).
4 methods for recovering the radio code (4 digits):
1Only the VIN is available: connect to code management on Renault.Net and enter the VIN. The code server gives
the original radio code entered in the World Vehicle Database (BVM).
If the code has not been entered in the World Vehicle Database or is incorrect when the code is entered in the radio,
follow the procedure below:
2The pre-code is available: go back to code management on Renault.Net, enter the pre-code and obtain the radio
code.
3For older vehicles which do not have a radio pre-code, enter the series number of the radio again. For example, for
Philips radio, this code starts with RN. In the photo of the radio, this code is RN277F30194601.
If this code is correct, the radio will operate again; if not, follow the procedure below:
4On Renault.Net, write a help message to be sent to the assistance unit.AB
C
THE VIN MUST BE ENTERED IN ALL 4 SOLUTIONS
WHEN REPLACING PARTS, OR FOR AN UNKNOWN VIN, WRITE A HELP MESSAGE IN CODE
MANAGEMENT ON RENAULT.NET TO UPDATE THE DATABASE.
MR-372-J84-86A000$198_eng.mif

RADIO
Anti-theft code
86A
86A - 7V2 MR-372-J84-86A000$297_eng.mif
RADIO
Anti-theft code
The radio is protected by a four digit code. This code
must be entered via the control satellite or the radio
keypad each time the battery is disconnected.
Entering the code with the control on the steering
wheel:
Press the lower button on the control to confirm an
entry.
Entry via the radio:
Enter the digits using buttons 1, 2, 3 and 4, and then
confirm with button 6.
If the code is entered incorrectly, the radio will be
locked (1 minute for the first error, 2 minutes for the
second error, 4 minutes for the third error, etc.
32 minutes maximum).
Some configurations must be set after the code has
been entered for the first time (see the Configuration
Section). These settings are stored when the battery is
disconnected.Reminder:
The radio will operate for approximately 2 minutes in
scrambled mode without the code having been entered
(with regular warning beeps).
If the vehicle is equipped with a CD changer in the
front panel, a code is exchanged between the CD
changer and the radio.
–If a new CD changer is fitted, the radio code is
programmed when the battery or CD changer is
connected.
–If the radio is replaced, enter the security code of the
old radio connected to the CD changer. The CD
changer is programmed with the code for the new
radio.
–If the old radio code is lost, the changer code can be
cleared using the clearing code. The clearing code is
issued by the Techline, server, etc.
Note:
If there is a configuration error, you can return to scrambled mode by pressing the 2 and 5 buttons at the same
time as switching the power on. Then wait 2 minutes.
Note:
The CD changer is supplied uncoded. When it is installed in the vehicle, the CD changer is programmed with the
radio supply code.
Reminder:
The radio will operate for approximately 2 minutes in scrambled mode without the code having been entered (with
regular warning beeps).
IMPORTANT
If the vehicle is fitted with a top of the range navigation system (ITS), enter the radio code in the following
way:
1. switch on the system by activating the vehicle's + after ignition feed,
2. wait 2 minutes: scrambled mode with beeps from the speakers, then code request screen appears,
3. enter the radio code using the ITS keypad: move the cursor with the central control and press to confirm.
4. switch off the ignition.
MR-372-J84-86A000$297_eng.mif

RADIO
Anti-theft code
86A
86A - 8V2 MR-372-J84-86A000$297_eng.mif
THE DISPLAY SHOWS 'CODE' OR '0000'
Entering the security code. The radio beeps
every 2 seconds for 2 minutes then displays
CODE.
No
Is the radio code
known?
Yes
Yes
No
Does the radio show
CODE then 0000?
Yes
Enter the first digit using the wheel control on the
steering wheel or the front panel.
Confirm that the digit is correct by briefly
pressing the lower steering wheel button or front
panel button.
Use the same procedure to enter the remaining
three digits.
Confirm the security code by pressing and
holding the same button or button (6) on the front
panel.
No
Does the radio show
ERROR then CODE?
Yes
(See anti-theft code recovery
procedure)
No
Has the 4-digit code
been obtained?
Go back to scrambled mode. With the
radio off, press the 2, 5 and ON buttons.
Wait approximately 2 minutes until CODE
then 0000 appears.
Does the radio show
ERROR CD then CD
CODE?
Yes
See display shows CD CODE.No
The radio enters "CONFIGURATION" mode (if
being used for the first time) and operates
normally.

RADIO
Configuration - Settings
86A
86A - 10V2 MR-372-J84-86A000$396_eng.mif
CONFIGURATIONS
NOTE:
To select the zone in which the radio is to be used,
press the buttons 2 and 5 while switching the power
on. Then wait approximately 2 min. Enter the four digit
code and then:
●select the tone curve appropriate for the vehicle
–0: no regulation
–1: Twingo
–2: Clio
–3: Mégane / Scénic
–4: Laguna
–5: Vel Satis - Espace
●select the relevant zone:
–America
–Japan
–Asia
–Arabia
–Others (Europe, Africa, other)SETTINGS
To enter configuration mode (Expert mode), press and
hold the Source button (4 seconds) until you hear a
bleep. This allows you to adjust the following functions:
NR range:
●AF mode activation (automatic retuning),
●vehicle speed-dependent volume control (5 for
maximum regulation, 0 to cancel regulation),
●Loudness mode activation.
PN range:
●AF mode activation (automatic retuning),
●vehicle speed-dependent volume control (5 for
maximum regulation, 0 to cancel regulation),
●Loudness mode activation,
●Assisted tuner mode activation,
●configuration of the number of speakers (2 or 4),
●manual or dynamic list selection.
PN6 radio:
●AF mode activation (automatic retuning),
●vehicle speed-dependent volume control (5 for
maximum regulation, 0 to cancel regulation),
●Loudness mode activation,
●Assisted tuner mode activation,
●configuration of the number of speakers (2 or 4),
●manual or dynamic list selection.
●activation of data storage in accordance with the
RENAULT Card: CARD ON/OFF. To operate, the
radio must be accompanied by the navigation
system. Note:
These configurations are not required when the
secret code is entered after the power supply has
been cut.
RADIO
Configuration - Settings
MR-372-J84-86A000$396_eng.mif

RADIO
Self-test procedure
86A
86A - 12V2 MR-372-J84-86A000$594_eng.mif
RADIO
Self-test procedure
The self-test procedure mode of the previous generation radios (PN0-6) allows certain main functions to be tested:
●by pressing buttons 2 and 4 at the same time, the speakers can be tested. They are supplied one by one; the
display enables the connections and signals from each speaker to be checked,
●by pressing buttons 1 and 6 at the same time, the reception level can be tested (after frequency is displayed),
–9 or letter: good reception,
–less than 3: poor reception,
–if 2: total loss of stereo.
The self-test procedure mode of the new generation radios (NR4/5) enables certain main functions to be tested
using the combination of buttons 1, 6 and i. The messages will be displayed in the following way:
●Radio pre-code displays one letter and 3 digits to avoid removal of the radio,
●speaker test with two bleeps (bass - treble) from the speakers, with the tested speakers shown on the display
(front left-hand H01, front right-hand H02, rear right-hand H03, rear left-hand H04),
●displays the frequencies and levels of the tuner sensors,
●software version displayed, displays fault finding for the connected aerial if the aerial is supplied by a coaxial
cable; in this case, the display shows H15 with X = 0, 1 or 2 depending on the aerial status (0: open circuit, 1:
short circuit to earth, 2: power consumption),
●audio test loudness OFF (H08), cuts any loudness for an audio test.
Note:
Also displays source use time and total time in 10 minute slots (Tuner (H09)/CD (H10)/cassette (H11)/CD changer
(H12)/auxiliary (13)/MP (H14)/Total (H15)).
MR-372-J84-86A000$594_eng.mif