Page 26 of 34
RADIO
Fault finding chart
86A
86A - 26V2 MR-372-J84-86A000$792_eng.mif
ALP 9No sound muting during Carminat messages,
voice synthesiser or hands-free kit
No muting of sound during messages.
Check for earth on connection 107D
(See Wiring diagrams Technical
Note, vehicle, code 261) during
messages only.
No
Is there an earth?
Yes
Replace the radio. The fault is not associated with
the radio. Check the continuity
and insulation of connection
107D using a multimeter.
No
Test OK?Replace the wiring or repair it if
the procedure exists
Yes
Page 27 of 34
RADIO
Fault finding chart
86A
86A - 27V2 MR-372-J84-86A000$792_eng.mif
ALP 10 The infrared remote control does not operate (PN6)
The infrared remote control does not
work. Check the continuity and
insulation of connections 34GH and
34GK (between the radio and
instrument panel see wiring
diagrams Technical Note, vehicle,
code 261).
No
Are the connections
sound?Replace the wiring or repair it if
the procedure exists.
Yes
Connect a multimeter to connection 34GH
and check that a voltage change occurs
when pressing the remote control.
Test OK?No Check that the battery
is sound.
Yes
Replace the radio. Test OK?No
Replace the
battery.
Yes
Replace the remote control. Connect a multimeter to
connection 34GH and check for 0V on the connection
when pressing the remote control.
Test OK?No Replace the
instrument
panel.
Yes
Replace the remote control.
Page 32 of 34
RADIO
Recovering a jammed CD
86A
86A - 32V2 MR-372-J84-86A000$891_eng.mif
Remove both ribbon cables.
Remove the upper section of mechanism.Turn the guides and push the mechanism as shown in
the diagram in order to raise or lower the CDs.
The CDs can now be accessed.
CHANGER IN THE DASHBOARD
IMPORTANT
Never refit the changer mechanism once it has been
removed.