6(Low Speed):Push the lever up to the
second position for steady wiping cycles at a slow
speed.
1(High Speed):Push the lever up to the
third position for steady wiping cycles at a high
speed.
7(Mist):For a single wiping cycle, push the
lever down once and let go. The wipers will
stop after one cycle. For additional cycles, hold
the lever down.
About 30 seconds after the wipers are on, the
headlamps, taillamps, and instrument panel
lighting will come on, and the Driver Information
Center (DIC) back lighting will decrease to
the night time mode. About ten seconds after the
wipers are turned off, all the lamps will go back
to the AUTO (Automatic) mode. SeeExterior
Lamps on page 144.
Windshield Washer
{CAUTION:
In freezing weather, do not use your
washer until the windshield is warmed.
Otherwise the washer uid can form ice
on the windshield, blocking your vision.
The windshield washer button is located at the
end of the windshield wiper lever.
K(Washer Fluid):Press this button to activate
the washer uid to spray onto the windshield.
The wipers will run for a few cycles to clear the
windshield. For more wash cycles, press and hold
the button.
If the vehicle is low on washer uid, the LOW
WASHER FLUID message will appear on
the Driver Information Center (DIC) display. See
“LOW WASHER FLUID” underDIC Warnings
and Messages on page 200for more information.
139