Once you have removed the wheel cover, use the
following procedure to remove the at tire and
install the spare tire.
1. Set the park brake rmly. Before preceding
it is recommended that you perform a safety
check. SeeChanging a Flat Tire on
page 435for more information.
2. Turn the wheel
wrench once on
each wheel nut to
loosen them. Do not
remove them yet.
3. Find the jacking location located on the
underside of the rocker trim using the diagram.
For jacking at the vehicle’s front location,
put the jack lift head (C) about 6 inches
(15 cm) from the rear edge of the front wheel
opening (B). Line up the jack with the
arrow (A) as shown.
439
