2007 PONTIAC GRAND PRIX lock

AUTO DOOR UNLOCK ON:If DRIVER or ALL
was selected on the AUTO DOOR UNLOCK
screen, this screen allows selection of when the
vehicle’s doors will unlock. The choices are
when the key is removed from the ignition or when
the vehicle is shifted into PARK (P).
If KEY-OUT is selected, the auto door unlock will
function when the key is taken out of the
ignition.
If PARK is selected, the auto door unlock will
function when the transaxle is shifted into
PARK (P).
To program this mode, use the following
procedure:
1. Press and release the set/reset button to
scroll to either KEY-OUT or PARK.
2. Press the options button again to advance to
the next screen.DELAYED LOCKING:This screen allows this
feature to be turned OFF or ON. The key must be
out of the ignition for this feature to work.
If OFF is selected, there will be no delayed locking
of the vehicle’s doors.
If ON is selected, the locking of the vehicle’s
doors will be delayed by ve seconds after
a power door lock switch is pressed while the door
is open, or the LOCK button on the remote
keyless entry transmitter is pressed while any door
is open.
To program this mode, use the following
procedure:
1. Press and release the set/reset button to
scroll to either OFF or ON.
2. Press the options button again to advance to
the next screen.
229

REMOTE LOCKS FEEDBACK:This screen
allows selection for this option to be turned OFF,
or gives the choice of two methods of verication;
LIGHTS or LIGHTS and HORN; that indicate
the vehicle’s doors are locked when the LOCK
button on the remote keyless entry transmitter is
pressed.
If OFF is selected, this feature will not be
programmed.
If LIGHTS is selected, the exterior lamps will ash
when the LOCK button on the remote keyless
entry transmitter is pressed.
If LIGHTS and HORN is selected, the exterior
lamps will ash when the LOCK button on
the remote keyless entry transmitter is pressed,
and the horn will sound when the LOCK button on
the remote keyless entry transmitter is pressed
again within ve seconds of the previous
command.To program this mode, use the following
procedure:
1. Press the set/reset button to scroll to OFF,
LIGHTS, or LIGHTS and HORN.
2. Press the options button again to advance to
the next screen.
If the vehicle does not have a content
theft-deterrent system, the next screens with
PROGRAMMING FINISHED and DISPLAY OFF
will appear.
If the vehicle does have a content theft-deterrent
system, the next screen will appear.
THEFT DETERRENT:The vehicle may have a
content theft-deterrent system. Once it is
turned on, the system will activate if someone tries
to enter the vehicle without using the remote
keyless entry transmitter or the correct key. This
screen allows this feature to be turned OFF or ON.
If OFF is selected, the content theft-deterrent
system will not function.
If ON is selected, the content theft-deterrent
system will be activated.
230

To program this mode, use the following
procedure:
1. Press the set/reset button to scroll to
OFF or ON.
2. Press the options button again to advance to
the next screen.
KEY CYLINDER DISARM:If the vehicle has a
content theft-deterrent system, and ON was
selected on the THEFT DETERRENT screen, this
screen allows this feature to be turned OFF or
ON. This feature determines whether the driver’s
door key cylinder may be used to disarm the
content theft-deterrent system.
If OFF is selected, the vehicle’s content
theft-deterrent system can not be disarmed by
unlocking the driver’s door using the driver’s door
key cylinder. Selecting OFF prevents a thief from
disarming the vehicle’s content theft-deterrent
system by attacking the driver’s door key cylinder,
and may make the vehicle more secure. However, if
OFF is selected, unlocking an armed vehicle by
using the driver’s door key cylinder and opening the
door will cause the content theft alarm to activate.
For this reason, it is recommended that the vehicle
be unlocked using the remote keyless entry system
when this feature is set to OFF.If ON is selected, the vehicle’s content
theft-deterrent system can be disarmed by
unlocking the driver’s door using the driver’s door
key cylinder.
To program this mode, use the following procedure:
1. Press the set/reset button to scroll to
OFF or ON.
2. Press the options button again to advance to
the next screen.
LOCK SWITCH ARM:If the vehicle has the
content theft-deterrent system and ON was
selected on the THEFT DETERRENT screen, this
screen allows this feature to be turned OFF or
ON. This feature controls whether the vehicle’s
content theft system can be activated using a door
lock switch.
If OFF is selected, locking the vehicle using a
door lock switch will not cause the vehicle’s
content theft system to arm.
231

If ON is selected, the content theft-deterrent
system can be armed using the driver’s door lock
switch by pressing the driver’s door lock switch
while the driver’s door is open and the key is not in
the ignition, or by pressing the front passenger’s
door lock switch while the front passenger’s door is
open and the key is not in the ignition.
To program this mode, use the following
procedure:
1. Press the set/reset button to scroll to
OFF or ON.
2. Press the options button again to advance to
the next screen.
REMOTE START:If your vehicle has the remote
start feature, this screen allows this feature to
be turned OFF or ON. The remote start feature
allows you to start the engine from outside of the
vehicle using your remote keyless entry
transmitter. See “Remote Vehicle Start” under
Remote Keyless Entry (RKE) System Operation on
page 87for more information.If OFF is selected, the remote start feature will be
disabled.
If ON is selected, the remote start feature will be
enabled.
To program this mode, use the following
procedure:
1. Press the set/reset button to scroll to
OFF or ON.
2. Press the options button again to advance to
the next screen.
PROGRAMMING FINISHED will appear on the
next screen. This conrms that the personal
options programming is complete.
232

This system relies upon receiving specic
information from these stations and only works
when the information is available. In rare cases, a
radio station may broadcast incorrect information
that causes the radio features to work improperly.
If this happens, contact the radio station.
While the radio is tuned to an RDS station, the
station name or call letters appear on the display
instead of the frequency. RDS stations may
also provide the time of day, a program type (PTY)
for current programming, and the name of the
program being broadcast.
XM™ Satellite Radio Service
XM™ is a satellite radio service that is based in
the 48 contiguous United States and Canada.
XM™ offers a large variety of coast-to-coast
channels including music, news, sports, talk,
traffic/weather (U.S. subscribers), and children’s
programming. XM™ provides digital quality
audio and text information that includes song title
and artist name. A service fee is required in
order to receive the XM™ service. For more
information, contact XM™; In the U.S. at
www.xmradio.com or call 1-800-852-XMXM (9696)
or in Canada at www.xmradio.ca or call
1-877-GET-XMSR (438-9677).
Playing the Radio
PWR (Power):Push this knob to turn the system
on and off.
VOL (Volume):Turn this knob clockwise or
counterclockwise to increase or to decrease the
volume.
SCV (Speed-Compensated Volume):With SCV,
the audio system adjusts automatically to make
up for road and wind noise as you drive.
Set the volume at the desired level. Press this
button to select MIN (minimum), MED (medium),
or MAX (maximum). Each higher setting allows for
more volume compensation at faster vehicle
speeds. Then, as you drive, SCV automatically
increases the volume, as necessary, to overcome
noise at any speed. The volume level should
always sound the same to you as you drive.
To turn SCV off, press this button until OFF
displays.
236

Radio Messages
CALIBRATE:The audio system has been
calibrated for your vehicle from the factory. If
CALIBRATE appears on the display it means that
the radio has not been congured properly for
your vehicle and must be returned your dealer for
service.
LOCKED:This message is displayed when the
THEFTLOCK
®system has locked up. Take
the vehicle to your dealer for service.
If any error occurs repeatedly or if an error cannot
be corrected, contact your dealer.
Radio Messages for XM™ Only
SeeXM Radio Messages on page 275later in this
section for further detail.
Playing a CD
Insert a CD partway into the slot, label side up.
The player pulls it in and the CD should begin
playing. If you want to insert a CD when the
ignition is off, rst press the eject button or push
the RCL knob. If you insert a CD with the radio off
and the ignition on, it starts to play.The CD symbol appears on the display when a
CD is loaded. The track number appears on
the display, as each new track starts to play.
If the ignition or the radio is turned off with a CD
in the player, it stays in the player. When the
ignition or the radio is turned on, the CD starts
playing where it stopped, if it was the last selected
audio source.
The CD player can play the smaller 3 inch (8 cm)
single CDs with an adapter ring. Full-size CDs
and the smaller CDs are loaded in the same
manner.
If playing a CD-R, the sound quality may be
reduced due to CD-R quality, the method of
recording, the quality of the music that has been
recorded, and the way the CD-R has been
handled. There may be an increase in skipping,
difficulty in nding tracks, and/or difficulty in loading
and ejecting. If these problems occur, check the
bottom surface of the CD. If the surface of the CD
is damaged, such as cracked, broken, or
scratched, the CD will not play properly. If the
surface of the CD is soiled, seeCare of Your CDs
on page 279for more information.
If there is no apparent damage, try a known
good CD.
242

Playing the Radio
PWR (Power):Push this knob to turn the system
on and off.
VOL (Volume):Turn this knob clockwise or
counterclockwise to increase or to decrease the
volume.
RCL (Recall):Push this knob to switch the
display between the radio station frequency and
the time. When the ignition is turned off, push this
knob to display the time.
For XM™ (if equipped), push the RCL knob while
in XM™ mode to retrieve four different categories
of information related to the current song or
channel: Artist, Song Title, Category or PTY,
Channel Number/Channel Name.To change the default on the display, push the
RCL knob until you see the desired display, then
hold the knob until the display ashes. The
selected display is now the default.
SCV (Speed-Compensated Volume):With SCV,
the audio system adjusts automatically to make
up for road and wind noise as you drive.
Set the volume at the desired level. Press this
button to select MIN (minimum), MED (medium),
or MAX (maximum). Each higher setting allows for
more volume compensation at faster vehicle
speeds. Then, as you drive, SCV automatically
increases the volume, as necessary, to overcome
noise at any speed. The volume level should
always sound the same to you as you drive. To
turn SCV off, press this button until OFF displays.
246

Playing the Radio
PWR (Power):Push this knob to turn the system
on and off.
VOLUME:Turn this knob clockwise or
counterclockwise to increase or to decrease the
volume.
RCL (Recall):Press this knob to switch the
display between the radio station frequency and
the time. When the ignition is off, press this
knob to display the time.
For RDS, press the RCL knob to change what
appears on the display while using RDS. The
display options are station name, RDS station
frequency, PTY, and the name of the program
(if available).
For XM™ (if equipped), press the RCL knob while
in XM mode to retrieve four different categories
of information related to the current song or
channel: Artist, Song Title, Category or PTY,
Channel Number/Channel Name.To change the default on the display, press the
RCL knob until you see the desired display,
then hold the knob until the display ashes. The
selected display is now the default.
AUTO VOL (Automatic Volume):With automatic
volume, the audio system adjusts automatically
to make up for road and wind noise as you drive.
Set the volume at the desired level. Press this
button to select MIN (minimum), MED (medium),
or MAX (maximum). Each higher setting allows for
more volume compensation at faster vehicle
speeds. Then, as you drive, automatic volume
increases the volume, as necessary, to overcome
noise at any speed. The volume level should
always sound the same to you as you drive.
To turn automatic volume off, press this button
until OFF displays.
257