2007 NISSAN TIIDA Evaporator sensor

VTL-2
FUNCTION DIAGNOSIS .............................32
AIR CONDITIONER FILTER .............................32
Description ..............................................................32
ON-VEHICLE MAINTENANCE ...................33
AIR CONDITIONER FILTER .............................33
Removal and Installation ........................................33
ON-VEHICLE REPAIR ................................34
CONTROLLER ..................................................34
Removal and Installation ........................................34
Disassembly and Assembly ....................................35
INTAKE SENSOR ..............................................36
Removal and Installation ........................................36
A/C UNIT ASSEMBLY .......................................37
Removal and Installation ........................................37
Disassembly and Assembly ....................................39
EVAPORATOR ..................................................41
Removal and Installation of Evaporator ..................41
HEATER CORE .................................................42
Removal and Installation .........................................42
BLOWER MOTOR .............................................43
Removal and Installation .........................................43
BLOWER FAN RESISTOR ...............................44
Removal and Installation .........................................44
INTAKE DOOR ..................................................45
Intake Door Cable Adjustment ................................45
AIR MIX DOOR ..................................................46
Air Mix Door Cable Adjustment ...............................46
MODE DOOR .....................................................47
Mode Door Cable Adjustment .................................47
DUCTS AND GRILLES .....................................48
Removal and Installation .........................................48
PTC HEATER ....................................................53
Removal and Installation of PTC Control Unit ........53
Removal and Installation of PTC Heater .................53
Removal and Installation of Water Temperature
Sensor .....................................................................
53

INTAKE SENSOR
VTL-11
< ON-VEHICLE REPAIR >[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
MA
B
VTL
N
O
P
INTAKE SENSOR
Removal and InstallationINFOID:0000000001696284
REMOVAL
1. Remove the evaporator. Refer to VTL-16, "Removal and Installation".
CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
2. Remove the intake sensor (1) from the evaporator (2).
CAUTION:
Mark the position of intake sensor on the evaporator for
installation.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
 Replace O-rings for A/C piping with new ones, and then apply compressor oil to it when installing it.
 Install the intake sensor in the same position as the original intake sensor.
 When recharging refrigerant, check for leaks.
ZJIA0798J

A/C UNIT ASSEMBLY
VTL-15
< ON-VEHICLE REPAIR >[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
MA
B
VTL
N
O
P
CAUTION:
After installing door motor, perform door motor starting position reset by following self-diagnosis
STEP-3. Refer to HAC-213, "
Front Air Control Self-Diagnosis".
25. Intake case (left) 26. Center defroster duct 27. Air mix door motor
28. Air mix door rod 29. Blower case (left) 30. Aspirator
31. Cover 32. Cover 33. Cooling hose
34. Expansion valve cover 35. Foot door lever 36. Foot door link
37. Expansion valve 38. Bolt 39. Air conditioner filter
40. Evaporator cover 41. Heater core 42. Spring
43. Air mix door lever 44. Water valve rod 45. Intake door
46. Intake case (right) 47. Foot duct (left) 48. Ventilator·defroster door
49. Foot door 50. Air mix door 51. Seal
52. Expansion valve grommet 53. O-ring 54. Evaporator
55. Bolt 56. Cooler pipe assembly 57. Water temperature sensor
58. Full hot switch 59. PTC heater 60. PTC control unit

VTL-16
< ON-VEHICLE REPAIR >[AUTOMATIC AIR CONDITIONER]
EVAPORATOR
EVAPORATOR
Removal and InstallationINFOID:0000000001696371
REMOVAL
1. Remove the A/C unit assembly. Refer to VTL-12, "Removal and Installation".
CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
2. Remove the air conditioner filter.
3. Remove foot duct (right). Refer to VTL-23, "
Removal and Installation".
4. Remove screws (A), and then remove expansion valve cover
(1).
NOTE:
Manual A/C system shown, automatic A/C system similar.
5. Remove screws (A), and then remove evaporator cover (1).
NOTE:
Manual A/C system shown, automatic A/C system similar.
6. Remove the evaporator (1) with lower blower case (2) from the
A/C unit assembly.
7. Remove the intake sensor (3) from the evaporator (1).
CAUTION:
Note the position of the intake sensor on the evaporator for
installation.
8. Remove the evaporator (1) from the lower blower case (2).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
 Replace O-rings for A/C piping with new ones, and then apply compressor oil to it when installing it.
 Install the intake sensor in the same position on the evaporator.
 When recharging refrigerant, check for leaks.
SJIA0673E
SJIA0674E
SJIA0599J

VTL-36
< ON-VEHICLE REPAIR >[MANUAL AIR CONDITIONER]
INTAKE SENSOR
INTAKE SENSOR
Removal and InstallationINFOID:0000000001700349
REMOVAL
1. Remove the evaporator. Refer to VTL-41, "Removal and Installation of Evaporator".
CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
2. Remove the intake sensor (1) from the evaporator (2).
CAUTION:
Mark the position of intake sensor on the evaporator for
installation.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
 Replace O-rings for A/C piping with new ones, and then apply compressor oil to it when installing it.
 Install the intake sensor in the same position as the original intake sensor.
 When recharging refrigerant, check for leaks.
ZJIA0798J