2007 NISSAN TIIDA steering wheel

AV-110
< SYMPTOM DIAGNOSIS >[AUDIO WITH NAVIGATION]
MULTI AV SYSTEM SYMPTOMS
 Check that the cellular phone is corresponding type (Bluetooth® enabled) when the hands free related mal-
function vehicle is in service before performing a diagnosis.
 There is a case that malfunction occurs due to the version change of the phone type, etc. even though it is a
corresponding type. Therefore, confirm it by changing the cellular phone to another corresponding type
phone, and check that it operates normally. It is necessary to distinguish whether the cause is the vehicle or
cellular phone. Check to ensure the customers phone is supported by checking the phone compatibility for
the hands free system.
Trouble diagnosis chart by symptom
RELATED TO STEERING WHEEL SWITCH
Symptoms Check items Possible malfunction location/Action to take
Does not recognize cellular
phone connection.Repeat the registration of cellular phone. NAVI control unit (XX-XX, "*****"
)
Hands free phone cannot be
established. Hands free phone operation can be
made, but the communication cannot
be established.
 Hands free phone operation can be
performed, however, voice between
each other cannot be heard during the
conversation.NAVI control unit (XX-XX, "*****"
)
The other party's voice cannot
be heard by hands free phone.Check the “microphone speaker ”in In-
spection & Adjustment Mode if sound is
heard.NAVI control unit (AV- 4 8 , "
CONSULT - III Function
(MULTI AV)")
Check the “microphone speaker ”in In-
spection & Adjustment Mode if sound is
not heard.TEL voice signal circuit
Originating sound is not heard
by the other party with hands
free phone communication.Sound operation function is normal. NAVI control unit (XX-XX, "*****"
)
Sound operation function does not work.Microphone signal circuit (AV- 9 1 , "
Diagnosis Proce-
dure")
Symptoms Possible malfunction location/Action to take
All steering switches are not operated. Steering switch signal ground circuit (XX-XX, "*****"
)
Only specified switch cannot be operated. Steering switch (XX-XX, "*****"
)
“ENTER”, “MENU UP”, “MENU DOWN” and “SOURCE”
switches are not operated.Steering switch signal A circuit (XX-XX, "*****"
)
“BACK”, “ ”, “VOL UP” and “VOL DOWN” switches are
not operated.Steering switch signal B circuit (XX-XX, "*****"
)

AV-116
< SYMPTOM DIAGNOSIS >[AUDIO WITH NAVIGATION]
NORMAL OPERATING CONDITION
PlaceIn a parking lotMatching may place the vehicle
mark on a nearby road when driving
in a parking lot, or other locations
where there are no roads on the
map. The vehicle mark may have
deviated from the correct location
when the vehicle returns to the road.
Direction errors accumulate, and the
vehicle mark may deviate from the
correct location when driving in cir-
cle or turning the steering wheel re-
peatedly.
Perform location correction and, if
necessary, direction correction if the
correct location has not been re-
stored after traveling about 10 km/h
(6 MPH). TurntableThe navigation system cannot re-
ceive the signal from the gyroscope
(angular speed sensor) when the ig-
nition switch is OFF. Therefore, the
displayed direction may be incorrect
and the correct road may not be eas-
ily returned to after rotating the vehi-
cle on a turntable with the ignition
OFF.
Slippery roadsOn snow, wet roads, gravel, or other
roads where tires may slip easily, ac-
cumulated mileage errors may
cause the vehicle mark to deviate
from the correct road.
SlopesAn error in the turning angle will oc-
cur, and the vehicle mark may devi-
ate from the road when parking in
sloped garages, when traveling on
banked roads, or in other cases
where the vehicle turns when tilted.
Map dataRoads not displayed on the map screen
Map matching does not function cor-
rectly and matches the location to a
nearby road when driving on new
roads or other roads not displayed
on the map screen. The vehicle
mark may deviate from the correct
road when the vehicle returns to a
road which is on the map.
Different road pattern
(Changed due to repair)
Map matching does not function cor-
rectly and matches the location to a
nearby road if the road pattern
stored in the map data and the actu-
al road pattern are different. The ve-
hicle mark may deviate from the
correct road. Cause (condition) Driving condition Remarks (correction, etc.)
SEL709V
SEL710V
SEL699V
ELK0201D

AV-118
< SYMPTOM DIAGNOSIS >[AUDIO WITH NAVIGATION]
NORMAL OPERATING CONDITION
THE CURRENT POSITION MARK JUMPS.
In the following cases, the current location mark may appear to jump as a result of automatic correction of the
current location.
 When map matching has been done
- The current location mark may seem to jump if current location and the current location mark are different
when map matching is done. At this time, the location may be “corrected” to the incorrect road or to a loca-
tion which is not on a road.
 When GPS location correction has been done
- The current location mark may seem to jump if current location and the current location mark are different
when location is corrected using GPS measurements. At this time, the location may be “corrected” to a loca-
tion which is not on a road.
THE CURRENT LOCATION MARK IS IN A RIVER OR THE SEA.
The navigation system moves the current location mark with no distinction between land and rivers or sea. It
may appear that the vehicle is driving in a river or the sea if the location mark is somehow out of place.
CURRENT LOCATION MARK ROTATES WITHOUT OPERATION
The rotating condition is recorded as the stop condition if the ignition switch is turned ON with the turntable
rotating. Therefore, the current location mark might rotate when actually stopping.
WHEN DRIVING ON THE SAME ROAD, SOMETIMES THE CURRENT LOCATION MARK IS IN THE
CORRECT PLACE AND SOMETIMES IT IS IN THE INCORRECT PLACE.
The conditions of the GPS antenna (GPS data) and gyroscope (angular speed sensor) change gradually.
Depending on the road traveled and operation of the steering wheel, the location detection results will be dif-
ferent. Therefore, even on a road on which the location has never been incorrect, conditions may cause the
vehicle mark to deviate.
LOCATION CORRECTION BY MAP MATCHING IS SLOW.
 The map matching function needs to refer to the data of the surrounding area. It is necessary to drive some
distance for the function to work.
 Because of the way map matching operates, when there are many roads running in similar directions in the
surrounding area a matching determination may be impossible. The location will remain uncorrected until
some special feature is found.
ALTHOUGH THE GPS RECEIVING DISPLAY IS GREEN, THE VEHICLE MARK DOES NOT RE-
TURN TO THE CORRECT LOCATION.
 GPS accuracy has a malfunction range of about 10 m (30 ft). In some cases the current location mark may
not be on the correct street, even when GPS location correction is done.
 The navigation system compares the results of GPS location detection with the results from map-matching
location detection. The one that is determined to have higher accuracy is used.
 Position correction by GPS is not available while the vehicle is stopped.
THE NAME OF THE CURRENT PLACE IS NOT DISPLAYED.
The current place name might not be displayed when there is no name of place information in the map screen.
THE DISPLAY IS DIFFERENT BETWEEN BIRDVIEW® AND (FLAT) MAP DISPLAY.
The following is different at Birdview®.
 The current place name displays names that are primarily in the direction of vehicle travel.
 The amount of time before the vehicle travel or turn angle is updated on the screen is longer than for the
(flat) map display.
 The conditions for display of place names, roads, and other data are different for nearby areas and for more
distant areas.
 Some trimming of the character data is done to prevent the display from becoming too complex. In some
cases and in some locations, the display contents may differ.
 The same place name, street name, etc. may be displayed multiple times.

NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING
BR-5
< SYMPTOM DIAGNOSIS >
C
D
E
G
H
I
J
K
L
MA
B
BR
N
O
P
SYMPTOM DIAGNOSIS
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING
NVH Troubleshooting ChartINFOID:0000000001716910
Use the chart below to help you find the cause of the symptom. If necessary, repair or replace these parts.
×: ApplicableReference page
BR-10
, BR-28
BR-10
, BR-28BR-10
BR-10
, BR-11
BR-10
, BR-11
BR-10
, BR-11
BR-10
, BR-11
BR-11
, BR-10—
BR-34, BR-41
FAX-4, "
NVH Troubleshooting Chart
"
TM-623, "
NVH Troubleshooting Chart
",
TM-667, "
NVH Troubleshooting Chart
"
FSU-5, "
NVH Troubleshooting Chart
" (FSU),
RSU-2, "
NVH Troubleshooting Chart
" (RSU)
WT-4, "
NVH Troubleshooting Chart
"
WT-4, "
NVH Troubleshooting Chart
"
FAX-4, "
NVH Troubleshooting Chart
"
ST-5, "
NVH Troubleshooting Chart
"
Possible cause and
SUSPECTED PARTS
Pads damaged
Pads - uneven wear
Shims damaged
Rotor imbalance
Rotor damage
Rotor runout
Rotor deformation
Rotor deflection
Rotor rust
Rotor thickness variation
WHEEL HUB
DIFFERENTIAL
SUSPENSION
TIRES
ROAD WHEEL
DRIVE SHAFT
STEERING
SymptomNoise××× × × × ××××
Shake×××××××
Shimmy, Shudder××××××× × ×× ×

BRC-1
BRAKES
C
D
E
G
H
I
J
K
L
M
SECTION BRC
A
B
BRC
N
O
P
CONTENTS
BRAKE CONTROL SYSTEM
ABS
BASIC INSPECTION ....................................
6
DIAGNOSIS AND REPAIR WORKFLOW ..........6
Work Flow .................................................................6
Diagnostic Work Sheet ..............................................9
INSPECTION AND ADJUSTMENT ....................10
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT ........................................................
10
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT : Description ................................
10
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT : Special Repair Requirement .....
10
ADJUSTMENT OF STEERING ANGLE SENSOR
NEUTRAL POSITION ................................................
10
ADJUSTMENT OF STEERING ANGLE SENSOR
NEUTRAL POSITION : Description ........................
10
ADJUSTMENT OF STEERING ANGLE SENSOR
NEUTRAL POSITION : Special Repair Require-
ment ........................................................................
10
CALIBRATION OF DECEL G SENSOR ...................11
CALIBRATION OF DECEL G SENSOR : Descrip-
tion ..........................................................................
11
CALIBRATION OF DECEL G SENSOR : Special
Repair Requirement ................................................
12
FUNCTION DIAGNOSIS ..............................13
VDC ....................................................................13
System Diagram ......................................................13
System Description .................................................13
Component Parts Location ......................................14
Component Description ...........................................15
TCS .....................................................................16
System Diagram ......................................................16
System Description .................................................16
Component Parts Location ......................................17
Component Description ...........................................18
ABS ...................................................................19
System Diagram ......................................................19
System Description ..................................................19
Component Parts Location ......................................20
Component Description ...........................................21
EBD ...................................................................22
System Diagram ......................................................22
System Description ..................................................22
Component Parts Location ......................................23
Component Description ...........................................24
DIAGNOSIS SYSTEM [ABS ACTUATOR
AND ELECTRIC UNIT (CONTROL UNIT)] .......
25
CONSULT-III Function (ABS) ..................................25
COMPONENT DIAGNOSIS .........................30
C1101, C1102, C1103, C1104 WHEEL SEN-
SOR-1 ................................................................
30
Description ...............................................................30
DTC Logic ................................................................30
Diagnosis Procedure ...............................................30
Component Inspection .............................................32
Special Repair Requirement ....................................32
C1105, C1106, C1107, C1108 WHEEL SEN-
SOR-2 ................................................................
33
Description ...............................................................33
DTC Logic ................................................................33
Diagnosis Procedure ...............................................33
Component Inspection .............................................35
Special Repair Requirement ....................................35
C1109 POWER AND GROUND SYSTEM ........36
Description ...............................................................36
DTC Logic ................................................................36
Diagnosis Procedure ...............................................36
Special Repair Requirement ....................................37

BRC-3
C
D
E
G
H
I
J
K
L
MA
B
BRC
N
O
P
PREPARATION ...........................................82
PREPARATION ..................................................82
Special Service Tool ...............................................82
REMOVAL AND INSTALLATION ...............83
WHEEL SENSORS ............................................83
Removal and Installation .........................................83
SENSOR ROTOR ...............................................84
Removal and Installation .........................................84
ACTUATOR AND ELECTRIC UNIT (ASSEM-
BLY) ....................................................................
85
Removal and Installation .........................................85
ESP/TCS/ABS
BASIC INSPECTION ...................................
86
DIAGNOSIS AND REPAIR WORKFLOW .........86
Work Flow ...............................................................86
Diagnostic Work Sheet ............................................89
INSPECTION AND ADJUSTMENT ....................90
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT ........................................................
90
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT : Description ................................
90
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT : Special Repair Requirement .....
90
ADJUSTMENT OF STEERING ANGLE SENSOR
NEUTRAL POSITION ................................................
90
ADJUSTMENT OF STEERING ANGLE SENSOR
NEUTRAL POSITION : Description ........................
90
ADJUSTMENT OF STEERING ANGLE SENSOR
NEUTRAL POSITION : Special Repair Require-
ment ........................................................................
90
CALIBRATION OF DECEL G SENSOR ...................91
CALIBRATION OF DECEL G SENSOR : Descrip-
tion ..........................................................................
91
CALIBRATION OF DECEL G SENSOR : Special
Repair Requirement ................................................
92
FUNCTION DIAGNOSIS ..............................93
VDC ....................................................................93
System Diagram ......................................................93
System Description .................................................93
Component Parts Location ......................................94
Component Description ...........................................95
TCS .....................................................................96
System Diagram ......................................................96
System Description .................................................96
Component Parts Location ......................................97
Component Description ...........................................98
ABS ....................................................................99
System Diagram ......................................................99
System Description ..................................................99
Component Parts Location ....................................100
Component Description .........................................101
EBD .................................................................102
System Diagram ....................................................102
System Description ................................................102
Component Parts Location ....................................103
Component Description .........................................104
DIAGNOSIS SYSTEM [ABS ACTUATOR
AND ELECTRIC UNIT (CONTROL UNIT)] .....
105
CONSULT-III Function (ABS) ................................105
COMPONENT DIAGNOSIS .......................110
C1101, C1102, C1103, C1104 WHEEL SEN-
SOR-1 ..............................................................
110
Description .............................................................110
DTC Logic ..............................................................110
Diagnosis Procedure .............................................110
Component Inspection ...........................................112
Special Repair Requirement ..................................112
C1105, C1106, C1107, C1108 WHEEL SEN-
SOR-2 ..............................................................
113
Description .............................................................113
DTC Logic ..............................................................113
Diagnosis Procedure .............................................113
Component Inspection ...........................................115
Special Repair Requirement ..................................115
C1109 POWER AND GROUND SYSTEM ......116
Description .............................................................116
DTC Logic ..............................................................116
Diagnosis Procedure .............................................116
Special Repair Requirement ..................................117
C1110, C1170 ABS ACTUATOR AND ELEC-
TRIC UNIT (CONTROL UNIT) ........................
118
DTC Logic ..............................................................118
Diagnosis Procedure .............................................118
Special Repair Requirement ..................................118
C1111 ABS MOTOR, MOTOR RELAY SYS-
TEM .................................................................
119
Description .............................................................119
DTC Logic ..............................................................119
Diagnosis Procedure .............................................119
Component Inspection ...........................................120
Special Repair Requirement ..................................120
C1113, C1145, C1146 YAW RATE/SIDE/DE-
CEL G SENSOR ..............................................
121
Description .............................................................121
DTC Logic ..............................................................121
Diagnosis Procedure .............................................121
Component Inspection ...........................................122
Special Repair Requirement ..................................122

BRC-4
C1115 WHEEL SENSOR .................................124
Description .............................................................124
DTC Logic ..............................................................124
Diagnosis Procedure .............................................124
Component Inspection ...........................................125
Special Repair Requirement ..................................126
C1116 STOP LAMP SWITCH ..........................127
Description .............................................................127
DTC Logic ..............................................................127
Diagnosis Procedure .............................................127
Special Repair Requirement ..................................128
C1120, C1122, C1124, C1126 IN ABS SOL ...129
Description .............................................................129
DTC Logic ..............................................................129
Diagnosis Procedure .............................................129
Component Inspection ...........................................130
Special Repair Requirement ..................................131
C1121, C1123, C1125, C1127 OUT ABS SOL .132
Description .............................................................132
DTC Logic ..............................................................132
Diagnosis Procedure .............................................132
Component Inspection ...........................................133
Special Repair Requirement ..................................134
C1130, C1131, C1132, C1133, C1136 EN-
GINE SIGNAL ..................................................
135
Description .............................................................135
DTC Logic ..............................................................135
Diagnosis Procedure .............................................135
Special Repair Requirement ..................................135
C1140 ACTUATOR RLY .................................137
Description .............................................................137
DTC Logic ..............................................................137
Diagnosis Procedure .............................................137
Component Inspection ...........................................138
Special Repair Requirement ..................................138
C1142 PRESS SENSOR .................................139
Description .............................................................139
DTC Logic ..............................................................139
Diagnosis Procedure .............................................139
Component Inspection ...........................................141
Special Repair Requirement ..................................141
C1143, C1144 STEERING ANGLE SENSOR .142
Description .............................................................142
DTC Logic ..............................................................142
Diagnosis Procedure .............................................142
Component Inspection ...........................................143
Special Repair Requirement ..................................143
C1155 BRAKE FLUID LEVEL SWITCH ..........145
Description .............................................................145
DTC Logic ..............................................................145
Diagnosis Procedure .............................................145
Component Inspection ...........................................146
Special Repair Requirement ..................................146
C1156 ST ANG SEN COM CIR ........................148
Description ............................................................148
DTC Logic .............................................................148
Diagnosis Procedure .............................................148
C1160 DECEL G SEN SET ..............................149
Description ............................................................149
DTC Logic .............................................................149
Diagnosis Procedure .............................................149
C1163 ST ANGLE SEN SAFE .........................150
Description ............................................................150
DTC Logic .............................................................150
Diagnosis Procedure .............................................150
C1179 ABS DELTA S SEN NG ........................151
Description ............................................................151
DTC Logic .............................................................151
Diagnosis Procedure .............................................151
Component Inspection ..........................................152
Special Repair Requirement .................................152
U1000 CAN COMM CIRCUIT ...........................153
Description ............................................................153
DTC Logic .............................................................153
Diagnosis Procedure .............................................153
Special Repair Requirement .................................153
VDC OFF SWITCH ...........................................154
Description ............................................................154
Component Function Check .................................154
Diagnosis Procedure .............................................154
Component Inspection ..........................................155
ABS WARNING LAMP .....................................156
Description ............................................................156
Component Function Check .................................156
Diagnosis Procedure .............................................156
BRAKE WARNING LAMP ................................157
Description ............................................................157
Component Function Check .................................157
Diagnosis Procedure .............................................157
VDC OFF INDICATOR LAMP ..........................158
Description ............................................................158
Component Function Check .................................158
Diagnosis Procedure .............................................158
SLIP INDICATOR LAMP ..................................159
Description ............................................................159
Component Function Check .................................159
Diagnosis Procedure .............................................159
ECU DIAGNOSIS ......................................160
ABS ACTUATOR AND ELECTRIC UNIT
(CONTROL UNIT) .............................................
160
Reference Value ...................................................160
Wiring Diagram - LHD ...........................................165
Wiring Diagram - RHD ..........................................167

BRC-5
C
D
E
G
H
I
J
K
L
MA
B
BRC
N
O
P Fail-Safe ................................................................
168
DTC No. Index ......................................................169
SYMPTOM DIAGNOSIS ............................171
VDC/TCS/ABS ..................................................171
Symptom Table .....................................................171
EXCESSIVE ABS FUNCTION OPERATION
FREQUENCY ...................................................
172
Diagnosis Procedure .............................................172
UNEXPECTED PEDAL REACTION ................173
Diagnosis Procedure .............................................173
THE BRAKING DISTANCE IS LONG ..............174
Diagnosis Procedure .............................................174
ABS FUNCTION DOES NOT OPERATE .........175
Diagnosis Procedure .............................................175
PEDAL VIBRATION OR ABS OPERATION
SOUND OCCURS ............................................
176
Diagnosis Procedure .............................................176
VEHICLE JERKS DURING VDC/TCS/ABS
CONTROL ........................................................
177
Diagnosis Procedure .............................................177
NORMAL OPERATING CONDITION ...............178
Description ............................................................178
PRECAUTION ............................................179
PRECAUTIONS ...............................................179
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" ...............................................................
179
Precaution for Brake System .................................179
Precaution for Brake Control .................................179
Diagnosis Precaution .............................................180
Precaution for Harness Repair ..............................180
PREPARATION .........................................181
PREPARATION ...............................................181
Special Service Tool ..............................................181
REMOVAL AND INSTALLATION .............182
WHEEL SENSORS .........................................182
Removal and Installation .......................................182
SENSOR ROTOR ............................................183
Removal and Installation .......................................183
ACTUATOR AND ELECTRIC UNIT (ASSEM-
BLY) ................................................................
184
Removal and Installation .......................................184
YAW RATE/SIDE G SENSOR ........................185
Removal and Installation .......................................185
STEERING ANGLE SENSOR .........................186
Removal and Installation .......................................186