Page 5 of 14

STEERING WHEEL SWITCHES FOR AUDIO
CONTROL (if so equipped)
To turn on the steering wheel audio system, press
PWR (power).
To choose FM, AM, SAT (if so equipped), CD and
Tape (if so equipped), press MODE repeatedly.
The
< >
switch can be used to perform the following:
• While in one of the preset radio station banks
(A, B or C), push the
< >
switch for less than 1.5 seconds to change to a preset
station.
• Push and hold the
< >
switch for more than 1.5 seconds to seek the next or
previous broadcasting radio station.
• Push the
< >
switch for less than 1.5 seconds while playing a CD or tape to
change tracks.
• Push and hold the
< >
switch for more than 1.5 seconds while playing a tape to
fast forward or rewind the tape.
• Push the
< >
switch for less than 1.5 seconds to cancel the fast forward or
rewind function and resume tape play.
• If the vehicle is equipped with a CD changer, push
and hold the
< >
switch for
more than 1.5 seconds to change between CDs.
Push the VOL control switch up or down to increase or decrease volume.
CRUISE CONTROL
To activate the cruise control, push the ON.OFF
switch The indicator light in the instrument panel will
illuminate.
To set cruising speed, accelerate the vehicle to the
desired speed, push the COAST/SET switch and
release it. The SET indicator light in the instrument
panel will illuminate.
To reset at a faster cruising speed, push and hold the
ACCEL/RES switch. When the vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch. Release
the switch when the vehicle slows to the desired speed.
To resume a preset speed, push and release the ACCEL/RES switch. The vehicle
returns to the last set cruising speed when the vehicle speed is 25 MPH (40 km/h)
or over.
To cancel cruise control, push the CANCEL switch or tap the brake pedal. The SET
indicator light in the instrument panel will go out.
To turn off cruise control, push the ON.OFF switch. Both the CRUISE indicator light
and the SET light in the instrument panel will go out.
Page 9 of 14

LOAD BUTTON
LOAD A SINGLE DISC - Press the LOAD button for less than 1.5 seconds. Select
the loading slot by pressing the CD insert select button (1-6), then insert the CD.
LOAD UP TO 6 DISCS - Press and hold the LOAD button for more than 1.5
seconds. The slot numbers (1-6) will illuminate on the display when CDs are
loaded into the changer.
SEEK /TRACK BUTTON
For radio, press to seek stations. For CD, press to select previous/next tracks.
STATION AND CD SELECT BUTTON
To store a radio station in a preset first select A, B, or C memory bank by press-
ing the PRESET A•B•C button and tuning to the desired FM, AM, or SAT* station.
Then press the desired station select button for at least 2 seconds. When the pre-
set indicator illuminates, a beep will sound, indicating memorization is complete.
To retrieve a previously set station, select the memory bank where the preset was
set, then press the corresponding station select button.
SCAN BUTTON
Press the SCAN button to tune from low to high frequencies and stop at each
broadcasting station for 5 seconds. If listening to a CD, each track will play for
about 10 seconds.
CAT FOLDER BUTTON CATEGORY (CAT)
When the CAT FOLDER button is pressed for more than 1.5 seconds during FM
(SAT*) mode, the PTY (PROGRAM TYPE) (if so equipped) name of the current
tuned station is displayed. Certain program types may include ROCK, COUNTRY,
JAZZ, CLASSICAL, etc.
MP3 PLAYBACK (if so equipped)
In addition to playing audio CDs, the audio system can play MP3 files recorded on
CD-ROM, CD-R, and CD-RW discs. Each disc can have a maximum of 8 folder
levels and 255 folders. A total of 512 MP3 files can be played back. During MP3
playback, some recorded ID3 tag information can be displayed by pressing the
DISP button. Use the CAT FOLDER button to navigate the MP3 files.
01
05
04
03
02
01
060708
11
12
0910
02
03
04
05
FM/AM/SAT* RADIO WITH CASSETTE PLAYER AND CD CHANGER
(if so equipped)
Page 10 of 14

*SAT presets are only available on SAT equipped vehicles.
DISP (display) BUTTON
Press to display CD or radio text.
PRESET A.B.C BUTTON
Press the PRESET A.B.C button until you reach the desired setting. The radio
is equipped with three separate banks of 6 station presets. You may store any
combination of FM, AM, or SAT* radio presets on each bank.
CD SELECT BUTTON
Press to activate CD functions.
RADIO BAND SELECT
Press the RADIO band select button to change the band as follows:
Without satellite radio: AM FM1 FM2 AM
With satellite radio: AM FM1 FM2 SAT1 SAT2 AM
TAPE BUTTON
Press the TAPE button. The system will come on and the tape will play.
RPT (repeat) /RDM (random) BUTTON
Change tape or CD play patterns.
TUNING AND AUDIO CONTROL KNOB
To manually tune the radio, turn the TUNE knob. Adjust the Bass, Midrange, Treble,
Fade, Balance, and Speed Sensitive Volume (SSV) (if so equipped) by pressing the
AUDIO knob until the desired mode appears in the display. Then turn the TUNE
knob to adjust to the desired level.
11
SUNROOF CONTROLS (if so equipped)
TILTING THE SUNROOF
To tilt the sunroof up, push the tilt switch to the
01 position. If the roof is open, it will
automatically close and then tilt up.
To tilt the sunroof down, push the tilt switch to the
02 position.
SLIDING THE SUNROOF
To open the roof, slide the switch to the 03 position. If the roof is tilted up, it will
automatically tilt down and then open.
To close the roof, slide the switch to the 04 position.
The position of the sliding roof lid can be chosen by the position of the sliding switch.
To fully open or close the roof, move the switch completely to the or position.
01
04
03
02
12
10
09
08
07
06