WW-34
FRONT WIPER AND WASHER SYSTEM
Revision: 2006 November2007 350Z
Inspection of Front Wiper and Washer Switch CircuitNKS0052T
Refer to LT- 9 2 , "Combination Switch Inspection" .
Removal and Installation of Front Wiper and Washer SwitchNKS0052U
REMOVAL
1. Remove steering column lower cover and combination meter.
Refer to IP-10, "
INSTRUMENT PANEL ASSEMBLY" .
2. Disconnect wiper and washer switch connector.
3. Pull wiper and washer switch toward the passenger door while
pressing pawls in direction shown by the arrow ( ) in the figure,
and remove it from the base.
INSTALLATION
Installation is the reverse order of removal.
Removal and Installation of Washer TankNKS0052V
REMOVAL
1. Remove clip and pull out washer tank inlet.
2. Remove under cover.
3. Remove fender protector. Refer to EI-21, "
FENDER PROTEC-
TOR" .
4. Remove front bumper fascia. Refer to EI-14, "
FRONT
BUMPER" .
5. Disconnect washer pump connector.
6. Remove washer tank mounting bolt and nuts.
7. Remove washer tube, and remove washer tank from the vehicle.
PKIB4999E
PKIA1903E
PKIB1791E
PKIA3704E
