2007 NISSAN 350Z 5th bow motor

[x] Cancel search: 5th bow motor

Page 2 of 130

NISSAN 350Z 2007 Z33 Roof Workshop Manual RF-2Revision: 2006 November2007 350Z Check Roof Actuator (Close Operate)  .................... 66
Check Roof Full Close Detection Switch  ................ 67
Check 5th Bow Actuator (Close Operate)  ..

Page 12 of 130

NISSAN 350Z 2007 Z33 Roof Workshop Manual RF-12
SOFT TOP
Revision: 2006 November2007 350Z
Following Parts Are Built Into 5th Bow Auto Closure Assembly.
5th bow half-latch switch built in 5th bow lock assembly in storage lid.
5th bow full-la

Page 14 of 130

NISSAN 350Z 2007 Z33 Roof Workshop Manual RF-14
SOFT TOP
Revision: 2006 November2007 350Z
CONDITION: OP 3
The 5th bow actuator moves the 5th bow up.
CONDITION: OP 4
The 5th bow is rising.
CONDITION: OP 5
The 5th bow stops in the fully-open

Page 18 of 130

NISSAN 350Z 2007 Z33 Roof Workshop Manual RF-18
SOFT TOP
Revision: 2006 November2007 350Z
CONDITION: CL 10
5th bow auto closure operates. The passenger seat tilts back. Closing operation is completed, soft top
front lock is locked,  and the

Page 33 of 130

NISSAN 350Z 2007 Z33 Roof Workshop Manual SOFT TOP
RF-33
C
D
E
F
G
H
J
K
L
MA
B
RF
Revision: 2006 November2007 350Z
Terminal and Reference Value of Soft Top Control UnitNIS0006H
CLOSE → OPEN OPERATION
The operation chart for roof position.

Page 35 of 130

NISSAN 350Z 2007 Z33 Roof Workshop Manual SOFT TOP
RF-35
C
D
E
F
G
H
J
K
L
MA
B
RF
Revision: 2006 November2007 350Z
OPEN → CLOSE OPERATION 
The operation chart for roof position. Refer to RF-21, "State Chart" .
48 Y/BStorage lid actuator LH

Page 38 of 130

NISSAN 350Z 2007 Z33 Roof Workshop Manual RF-38
SOFT TOP
Revision: 2006 November2007 350Z
(OPEN → CLOSE)
The operation chart for roof position. Refer to RF-21, "State Chart" .
Both power window down and 
passenger seat are not oper-
ated.Ch

Page 76 of 130

NISSAN 350Z 2007 Z33 Roof Workshop Manual RF-76
SOFT TOP
Revision: 2006 November2007 350Z
4. CHECK SOFT TOP CONTROL UNIT OUTPUT SIGNAL
1. Connect soft top control unit connector.
2. Start engine.
3. Check voltage between soft top control unit
Page:   1-8 9-16 next >