2007 NISSAN 350Z seat adjustment

RF-2Revision: 2006 November2007 350Z Check Roof Actuator (Close Operate) .................... 66
Check Roof Full Close Detection Switch ................ 67
Check 5th Bow Actuator (Close Operate) .............. 69
Check 5th Bow Full Close Detection Switch (Close
Operate) ................................................................. 69
Check 5th Bow Full Open Detection Switch (Close
Operate) ................................................................. 71
Check 5th Bow Half-Latch Switch (Close Operate) ... 72
Check 5th Bow Full-Latch Switch ........................... 73
Check 5th Bow Ending Switch ................................ 75
Check 5th Bow Closure Motor ................................ 76
Check Soft Top Front Lock Switch .......................... 77
Check Operation Permission Condition .................. 78
Check Each Switch Condition (Open Operate) ...... 80
Check Each Switch Condition (Close Operate) ...... 81
Check Power Window Down Request Signal ......... 81
Check Power Window Harness .............................. 82
Check Passenger Side Seat Operate Signal 1 ....... 82
Check Passenger Side Seat Operate Signal 2 ....... 83
Check Passenger Side Seat Operate Signal 3 ....... 83
Check Seat Back Position Signal ........................... 83
Check Speed Signal Circuit .................................... 84
Check Indicator Lamp Circuit ................................. 85
Removal and Installation of Soft Top Control Unit ... 86
REMOVAL ........................................................... 86
INSTALLATION .................................................... 86
Component Parts Drawing ...................................... 87
Removal and Installation of Soft Top Assembly ...... 88
REMOVAL ........................................................... 88
INSTALLATION .................................................... 89
Removal and Installation of Soft Top Cover ............ 90
REMOVAL ........................................................... 90
INSTALLATION .................................................... 97
Removal and Installation of Switches ...................107
REMOVAL .........................................................107
INSTALLATION ..................................................107
Removal and Installation of Roof Actuator ...........108
REMOVAL .........................................................108
INSTALLATION ..................................................108
Removal and Installation of 5th Bow Drive Unit ....108REMOVAL ..........................................................108
INSTALLATION .................................................. 111
Removal and Installation of Front Lock .................115
REMOVAL ..........................................................115
INSTALLATION ..................................................115
INSPECTION AND ADJUSTMENT ...................115
Repairing Method for Water Leakage Around Doors .116
WATER LEAKAGE FROM A ..............................116
WATER LEAKAGE FROM B ..............................117
WATER LEAKAGE FROM C .............................117
WATER LEAKAGE FROM D .............................118
WATER LEAKAGE FROM E ..............................118
WATER LEAKAGE TEST ..................................119
Correspondence in Emergency ............................120
MANUAL OPERATION (SOFT TOP FULLY
OPEN
FULLY CLOSE) ..................................120
MANUAL OPERATION (SOFT TOP FULLY
CLOSE
FULLY OPEN) ..................................121
STORAGE LID .........................................................123
Removal and Installation of Storage Lid Assembly .123
REMOVAL ..........................................................123
INSTALLATION ..................................................123
Removal and Installation of Storage Lid Inside Unit .124
REMOVAL ..........................................................124
INSTALLATION ..................................................125
Removal and Installation of Storage Lid Actuator .126
REMOVAL ..........................................................126
INSTALLATION ..................................................126
Removal and Installation of Storage Room Finisher .126
REMOVAL ..........................................................126
INSTALLATION ..................................................127
Removal and Installation of Storage Outer Protector .127
Adjustment of Storage Lid .....................................128
ADJUSTMENT IN FULLY CLOSED POSITION .128
ADJUSTMENT IN FULLY OPENED POSITION .129
Removal and Installation of Storage Lid Striker Lock
& Storage Lid Emergency Opener Cable ..............130
REMOVAL ..........................................................130
INSTALLATION ..................................................130

RF-8
SQUEAK AND RATTLE TROUBLE DIAGNOSES
Revision: 2006 November2007 350Z
TRUNK
Trunk noises are often caused by a loose jack or loose items put into the trunk by the owner.
In addition look for:
1. Trunk lid dumpers out of adjustment
2. Trunk lid striker out of adjustment
3. The trunk lid torsion bars knocking together
4. A loose license plate or bracket
Most of these incidents can be repaired by adjusting, securing or insulating the item(s) or component(s) caus-
ing the noise.
SUNROOF/HEADLINING
Noises in the sunroof/headlining area can often be traced to one of the following:
1. Sunroof lid, rail, linkage or seals making a rattle or light knocking noise
2. Sunvisor shaft shaking in the holder
3. Front or rear windshield touching headlining and squeaking
Again, pressing on the components to stop the noise while duplicating the conditions can isolate most of these
incidents. Repairs usually consist of insulating with felt cloth tape.
SEATS
When isolating seat noise it's important to note the position the seat is in and the load placed on the seat when
the noise is present. These conditions should be duplicated when verifying and isolating the cause of the
noise.
Cause of seat noise include:
1. Headrest rods and holder
2. A squeak between the seat pad cushion and frame
3. The rear seatback lock and bracket
These noises can be isolated by moving or pressing on the suspected components while duplicating the con-
ditions under which the noise occurs. Most of these incidents can be repaired by repositioning the component
or applying urethane tape to the contact area.
UNDERHOOD
Some interior noise may be caused by components under the hood or on the engine wall. The noise is then
transmitted into the passenger compartment.
Causes of transmitted underhood noise include:
1. Any component mounted to the engine wall
2. Components that pass through the engine wall
3. Engine wall mounts and connectors
4. Loose radiator mounting pins
5. Hood bumpers out of adjustment
6. Hood striker out of adjustment
These noises can be difficult to isolate since they cannot be reached from the interior of the vehicle. The best
method is to secure, move or insulate one component at a time and test drive the vehicle. Also, engine RPM
or load can be changed to isolate the noise. Repairs can usually be made by moving, adjusting, securing, or
insulating the component causing the noise.