2007 MERCEDES-BENZ SLR Owner's Manual

160 Controls in detail
Audio system
Selecting CDs
You can select from among the CDs in
the CD magazine using buttons4
to6.
CD and the magazine slot number of the
selected CD appear in the display. The
number of the current track is
displayed after
TRACK.
If there is no CD in the selected maga-
zine slot,
NO CD appears on the display
with the corresponding slot number.Skipping tracks forward/backward

Skipping tracks forward
Pressf button.
The next track will be played.

Skipping tracks backward
Presse button.
If the track has been playing for
more than 10 seconds, it will revert
to the start of that track. If it has
been playing for less than
10 seconds, it will revert to the
preceding track.
Pressing thef or ebutton repeat-
edly will result in multiple tracks being
skipped.
Fast forward/reverse

Fast forward
Press and holdd button until
desired point has been reached.

Fast reverse
Press and holdc button until
desired point has been reached.
Scanning

Starting scan
Press2 button.
SC appears in the display.
Each track on the current CD will be
played for approximately 8 seconds
in ascending order.

Ending scan
Press2, d, c, f or
ebutton.
iThe relative time of the track is shown on the
display during the search.

161 Controls in detail
Audio system
Random play
The random play function (RDM) plays the
tracks on the current CD in random order.

Switching on random play
Press theRDM key.
RDM is highlighted in the display.

Switching off random play
Press theRDM key.
The highlighted
RDM in the display
disappears.Repeat
The repeat function (RPT) repeats the cur-
rent track.

Switching on repeat
Press theRPT key.
RPT is highlighted in the display.

Switching off repeat
Press theRPT key.
The highlighted
RPT in the display
disappears.Track and time display
Press theT key.
The number of the track being played
and the elapsed playing time appear in
the display.
Press theT key.
The total number of tracks and the total
playing time of the CD appear in the
display.
The CD main menu appears again after
8 seconds.
iThe random play and repeat function cannot
be used simultaneously.

162 Controls in detail
Audio system
Telephone operationVarious car telephone functions and oper-
ating steps for the car telephone can be
performed and displayed via the audio
system.
Further operating instructions not covered
here can be found in the operating
instructions for the multifunction steering
wheel and the telephone.
Switching on the telephone
Pressh button.
If you have programmed an unlock
code for the telephone, you must enter
the code now.
Enter the code using buttons4
toM.
If necessary, correct number entered
with the
CLR key. Press key briefly to
delete the last digit entered; press key
and hold to delete the complete
number.
Press theOK key after entering correct
code.
The telephone is unlocked. If you have
entered the wrong code, you must re-
peat the entering procedure with the
correct code.
Switching off the telephone
Pressh button repeatedly until
PHONE OFF appears in the display.
The receiving symbol in the display
disappears.
Adjusting the volume
Turn control knoba during tele-
phone operation.
The volume increases or decreases de-
pending on the direction in which the
knob is turned.
Warning!G
Please do not forget that your primary re-
sponsibility is to drive the vehicle. A driver’s
attention to the road must always be
his/her primary focus when driving. For
your safety and the safety of others, we rec-
ommend that you pull over to a safe location
and stop before placing or taking a
telephone call.
If you choose to use the telephone
1 while
driving, please use the hands-free device
and only use the telephone when road,
weather and traffic conditions permit. Some
jurisdictions prohibit the driver from using a
mobile telephone while driving a vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet
(approximately 14 m) every second.
1Observe all legal requirements.
iThe volume can be adjusted separately for
the telephone and radio.

163 Controls in detail
Audio system
Placing a call
Entering a telephone number and
starting the dialing process
Enter the desired telephone number
using buttons4 toM.
The number can have up to 32 digits,
but only 13 of these are visible on the
display.
If necessary, correct number entered with
the
CLR key.
Press key briefly to delete the last digit
entered.
Press key and hold to delete the
complete number.
After correct telephone number has
been entered, press the
SND key.Phone book
The numbers stored in the phone book can
be called up either by name or number.
Calling up the phone book
Pressd, c, f or
ebutton.
Switching between name search and
number search
Press theABC key.
The name search is called up.
or
Press theNUM key.
The number search is called up.Searching and calling up phone book
entries by name
Press theABC key.
The current name is highlighted on the
display.
Press either thed or cbutton.
The stored entries are selected accord-
ing to the alphabetical order of the
initial letter.
or
Press either thef or ebutton.
The stored entries are selected in
increments of four.
or


164 Controls in detail
Audio system
Press the desired numerical key2
to9.
The stored entries are selected accord-
ing to the alphabetical order of the ini-
tial letters (e.g. for B -Brown, press
button2 twice).Searching and selecting phone book
entries by number
Press theNUM key.
The current number is marked in the
display.
Press either thed or cbutton.
The stored entries are selected
according to numerical order.
or
Press either thef or ebutton.
The stored entries are selected in
increments of 5 (e.g. Entry
M5, Entry
M10, etc.).Starting dialing process
Once you have selected a number,
press the
SND key.
Repeat dialing
If the number dialed is busy, you can again
place calls to the last ten telephone
numbers dialed using the repeat dialing
function.
iSeveral characters and symbols cannot be
shown on the display for technical reasons. They
have been replaced with spaces.


165 Controls in detail
Audio system
Manual repeat dialing (redial)
Press theSND key.
The last number dialed is shown in the
display.
Select the desired telephone number
usingd, c, f or
ebutton.
The abbreviation
L and the number of
the entry are shown in the top line of
the display.
When you have selected a number,
press the
SND key.
The call will be made.Automatic repeat dialing (redial)
If a call cannot be connected, press
the
SND key.
REDIAL will appear in the display and re-
peated attempts to place the call will be
made for the next 4 minutes.
Selecting numbers directly from the
directory
Enter previously selected 3-digit
(1-999) number of the entry using
number keys4 toM.
Press theRCL key.
The telephone number stored under
that entry will be dialed.
Press theSND key.
The call will be made.Speed dialing
Input desired entry number using
number keys4 toM.
A maximum of two digits can be en-
tered.
If necessary, correct the last number
entered with the
CLR key.
Press theSND key.
The telephone number stored under
that entry will be dialed. The number,
L
and the full entry number will be shown
in the display.
Quick-dialing
Press one of the desired number
buttons4 toM longer than
1 second.
The telephone number saved under
that number will be dialed.
!Please be aware that button4 might al-
ready be reserved for an emergency call number.

166 Controls in detail
Audio system
Emergency calls “911”
The following describes how to dial a “911”
emergency call using the audio system
head unit when a Mercedes-Benz specified
mobile phone is inserted in the phone
cradle. Unless otherwise specified, the de-
scriptions refer to the audio system head
unit.
Consult the separate telephone operating
instructions that came with your mobile
phone for information on how to place a
“911” emergency call on the mobile
phone. The following conditions must be met for a
“911” emergency call:

Telephone must be switched on.

The corresponding mobile communica-
tions network must be available.
If you cannot make an emergency call, you
will have to initiate rescue measures
yourself. Placing a “911” emergency call using
audio head unit with the phone locked
Press hbutton to switch to
telephone operation.
CODE? appears in the audio display.
Press button4 on the audio head
unit until
911 appears in the audio
display.
911 appears in the audio display while
the telephone establishes the connec-
tion.
Wait until the emergency call center
answers, then describe the emergency.
Warning!G
The “911” emergency call system is a public
service. Using it without due cause is a
criminal offense.
iEmergency calls may not be possible with all
telephone networks or if certain network servic-
es and/or telephone functions are active. Check
with your local service providers.

167 Controls in detail
Audio system
Placing a “911” emergency call using
audio head unit with the phone
unlocked
Press hbutton to switch to
telephone operation.
Enter 911 using the number keypad on
the audio head unit.
Press theSND key for dialing to begin.
The telephone establishes the
connection.
Wait until the emergency call center
answers, then describe the emergency. Accepting an incoming call
Accepting an incoming call in telephone
mode
With an incoming call, a ringing tone can
be heard and the caller’s telephone num-
ber, or the name under which this tele-
phone number has been saved in the
telephone book, appears on the display. If
the caller’s number is not transmitted,
CALL will appear in the display.
Press theSND key to accept call.Accepting an incoming call in cassette,
CD or radio mode
If the telephone is activated in the back-
ground (receiving symbol
S visible on dis-
play), the audio source is muted when a
call is received. The ringing tone is heard
and the caller’s telephone number or the
name under which this telephone number
has been saved in the telephone book ap-
pears on the display. If the caller’s number
is not transmitted,
CALL appears in the
display.
Press theSND key to accept the call.