2007 MERCEDES-BENZ SL-Class audio

46 Audio
Radio operation
Station selection via number keypad
(presets)
FM and AM Bands
Press one of the number keys, such as
2 briefly.
The radio will tune to the frequency as-
signed to that memory location. If none
has been set by you, the radio will not
change the station.Station selection via direct frequency
entry (FM, AM)
E.g.: 102.7 MHz in the FM bandActivate the desired waveband
(
page 43).
Press *.
An input line will appear.
Enter the desired frequency with the
number keys within 8 seconds, e.g.
1027 for 102.7 FM.
The station you have selected will
begin to play.
i
FM and AM presets are independent
and can only be accessed while in the
corresponding band.
Saving stations for FM and AM
(
page 48).
Frequency bandFrequency range
FM
AM87.7 - 107.9 FM
530 - 1710 AM

47 Audio
Radio operation
FM, AM band
Entries outside the frequency range are
not possible.Automatic station scan (FM, AM)
The stations in a given waveband (FM, AM)
can be scanned one after the other for 8
seconds each.
The scan function stops automatically
when the first station received has been
scanned twice.Start scan function
Activate the desired wave band
(
page 43).
Press the Scan soft key.
The scan function will begin.
Scan will
appear in black lettering.
End scan function and play a station
Press the Scan soft key again if you
hear the desired station.
i
If you do not make another entry within
8 seconds, the function will be canceled
and you will listen to the station last tu-
ned to.
i
Station scan performs two runs. During
the first run, stations with good
reception are played. During the
second run, stations with weaker
reception are played.

48 Audio
Radio operation
You can use the following functions:
Saving stations manually (FM, AM)
Saving stations automatically FM, AM
(
page 49)
Selecting a station from the FM/AM
Preset menu (
page 50)
Selecting a station from the FM/AM
Auto presets (
page 51)Saving stations manually (FM, AM)
In the Radio main menu
Activate the desired waveband
(
page 43).
Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 217).
The radio saves the current station at
the memory preset selected. The me-
mory preset selected will appear in the
status line, e.g. “FM2”.On the memory list
Activate the desired waveband
(
page 43).
Press the Presets soft key.
The memory Preset menu will appear.
Use H, h or g, G to highlight
the desired memory preset.
Press E longer than 2 seconds.
The current station will be saved at the
memory preset selected.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 217).
Memory functions
i
There are 10 presets available (1 -
9, 0).
An existing entry is overwritten in the
memory list when a new input is given.

49 Audio
Radio operation
You will see the Radio main menu
automatically after 8 seconds
if you press the Back soft key.Saving stations automatically (FM, AM)
Activate the desired waveband
(
page 43).
Press the Autost. soft key.
The autostore presets will appear.
Press E and confirm Reprogram
Autostore
.
The autostore function is active. The
radio stores the 10 stations with the
strongest signal. The station
frequencies available will appear in the
memory list.
i
There are 2 presets for each of the FM
and AM waveband, standard FM/AM
presets (saving stations manually) and
Auto presets (saving stations automati-
cally).
The standard FM/AM presets are not
affected by the Auto presets. This is a
second option for storing a station ran-
ge you are currently receiving.
i
There are 10 presets available (1 -
9, 0).
The autostore function assigns the sta-
tions to the memory locations in the or-
der of their reception quality.

50 Audio
Radio operation
Selecting a station from the preset
menu (FM, AM)
Activate the FM or AM memory
(
page 48).
You can use one of the following two ways
to select a station from the FM/AM
presets
Press the corresponding number key,
e.g. 3, to select the desired station.
or
Use H, h or g, G to highlight a
memory preset in the FM/AM preset
list.
Press E.
In both cases, you will see the Radio
main menu
automatically after 8 seconds
if you press the Back soft key.
The Radio main menu indicating the
memory preset number appears.

51 Audio
Radio operation
Selecting a station from the FM/AM
autostore presets
Activate the FM or AM autostore pre-
sets (
page 49).
Use H, h or g, G to highlight a
memory position.
Press E.
You will see the Radio main menu
automatically after 8 seconds
if you press the Back soft key.

52 Audio
CD operation

CD operation
General Information on CD operation
WarningG
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 44 feet (approximately 14 m)
every second.
WarningG
The CD drive and CD changer are Class 1 la-
ser products. There is a danger of invisible
laser radiation when you open or damage
the cover.
Do not remove the cover. The CD drive and
the CD changer do not contain any parts
which can be serviced by the user. For safe-
ty reasons, have any necessary service work
performed by qualified personnel.
i
Only use CDs, which bear the label
shown and that conform to the compact
standard (IEC 60908). You can there-
fore only use CDs with a maximum
thickness of 1.3 mm.
i
The COMAND CD drive may not be able
to play audio CDs with copy protection
or copied CDs.
!
Use only CDs with a diameter of 12 cm,
do not use 8-cm CDs.
An 8-cm CD adapter may cause dama-
ge to the CD changer or to the
COMAND and should not be used.
i
Your CD drive has been designed to
play CDs which correspond to the IEC
60908 standard.
If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected
and will damage the drive.

53 Audio
CD operation
Avoid touching the CD surface with
your fingers.
Clean the CD with a dry, lint-free cloth.
Wipe them from the inside to the outer
edge. Never wipe the CD in a circular
motion.
Do not use rubbing alcohol or solvents
to clean the CDs.
Do not expose the CDs to heat or direct
sunlight.
Do not write or put stickers on CD.Playback locations for CDs are:
the CD drive in the COMAND
the CD changer.
CD drive
The CD drive in the COMAND can playback
audio CDs and MP3-CDs (
page 63). The
slot of the drive is above the display. When
playing MP3 CDs in the CD drive, only the
first 99 tracks will be played back in
successive order. After that, playback will
begin with track 1 of the MP3 CD.
CD changer
The CD changer can accomodate up to 6
audio or MP3-CDs. It is located on the left-
hand side behind the driver’s seat.When playing MP3 CDs in the CD changer,
only the first 99 tracks will be played back
in successive order. After that, playback
will begin with track 1 of the MP3 CD.
Folder selection (
page 69), (page 72)
is not possible.
Multi session CDs include mixed file types
(e.g. MP3 and audio CD) in either succes-
sive or random order on the disc. Audio
tracks will be played back first by the CD
changer, followed by MP3 tracks until 99
tracks are reached.
In MP3 mode the CD changer can read
CD-R and CD-RW CDs.
Refer to additional MP3 information:
Permissible file systems (page 64)
Permissible MP3 formats (page 66)
Permissible bit and scan rates
(
page 66)
Tips on caring for your CDsPlayback information