2007 MERCEDES-BENZ ML320CDI child lock

[x] Cancel search: child lock

Page 5 of 585

MERCEDES-BENZ ML320CDI 2007 W163 Comand Manual ContentsSafety and Security...........................  69
Occupant safety...................................  70
Air bags ..........................................  71
Seat belts ...................

Page 39 of 585

MERCEDES-BENZ ML320CDI 2007 W163 Comand Manual 38 Getting startedThe “Getting started” section provides an 
overview of the vehicle’s most basic func-
tions. First-time Mercedes-Benz owners 
should pay special attention to the infor-
mation

Page 40 of 585

MERCEDES-BENZ ML320CDI 2007 W163 Comand Manual 39 Getting started
Unlocking
Unlocking with KEYLESS-GO*
With the KEYLESS-GO function, you can 
lock or unlock the vehicle without using 
the remote control buttons on the 
SmartKey and start the engin

Page 44 of 585

MERCEDES-BENZ ML320CDI 2007 W163 Comand Manual 43 Getting started
Adjusting
Adjusting
SeatsWarning!
G
All seat, head restraint, steering wheel, and 
rear view mirror adjustments, as well as fas-
tening of seat belts, must be done before 
the vehi

Page 47 of 585

MERCEDES-BENZ ML320CDI 2007 W163 Comand Manual 46 Getting startedAdjustingHead restraint fore and aft adjustment
Manually adjust the angle of the head 
restraint.
While seated, reach behind you with 
both hands and find lower edge of the 
head re

Page 49 of 585

MERCEDES-BENZ ML320CDI 2007 W163 Comand Manual 48 Getting startedAdjusting1Release handle
To unlock the steering column, pull 
release handle1 out to its stop limit.

Move steering wheel to the desired 
position.

Push release handle1 back to i

Page 56 of 585

MERCEDES-BENZ ML320CDI 2007 W163 Comand Manual 55 Getting started
Driving
Starting with the SmartKey
For information on turning off the engine 
with the SmartKey, see “Turning off the en-
gine” (
page 66).
Gasoline engine

Make sure the auto

Page 58 of 585

MERCEDES-BENZ ML320CDI 2007 W163 Comand Manual 57 Getting started
Driving
Starting difficulties
If the engine does not start as described, 
carry out the following steps:
If you are starting the engine with the 
SmartKey, turn SmartKey in starter
Page:   1-8 9-16 17-24 25-32 32 next >