Page 156 of 514

155 Controls in detail
Control system
Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position1 or as soon as the
KEYLESS-GO start/stop button* is in
position1. The control system enables you
to:
call up information about your vehicle
change vehicle settings
For example, you can use the control sys-
tem to find out when your vehicle is next
due for service, to set the language for
messages in the instrument cluster dis-
play, and much more.
The control system relays information to
the multifunction display.
Multifunction display
1Outside temperature
2Trip odometer
3Automatic transmission program mode
4Main odometer
5Current gear selector lever position
Above illustration shows the standard dis-
play.
For more information on menus displayed
in the multifunction display, see “Menus”
(page 158).
i
The displays for the audio systems (radio,
CD player) will appear in English, regardless of
the language selected.
Warning!
G
A driver’s attention to the road and traffic
conditions must always be his / her primary
focus when driving.
For your safety and the safety of others, se-
lecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km / h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
Page 172 of 514

171 Controls in detail
Control system
The table below shows what settings can
be changed within the various menus.
Detailed instructions on making individual
settings can be found on the following pag-
es.Instrument cluster
Time/Date
Lighting
Vehicle
Convenience
(page 172)
(page 174)
(page 176)
(page 180)
(page 181)
Selecting speedometer display
mode
Synchronizing the time
Setting daytime run-
ning lamp mode
(USA only)
Setting automatic
locking
Activating
easy-entry / exit feature
Selecting language
Setting the time (hours)
Setting locator lighting
Limiting opening
height of tailgate*
Setting parking position
for exterior rear view
mirror
1
1If equipped.Selecting display (speed dis-
play or outside temperature)
for status line
Setting the time (minutes)
Setting ambient light-
ing
Audio search function
Selecting display (speed dis-
play or outside temperature)
for basic display
Setting the date (month)
Setting headlamps de-
layed shut-off
Setting the date (day)
Setting interior lighting
delayed shut-off
Setting the date (year)
Page 173 of 514

172 Controls in detailControl systemInstrument cluster submenu
Access the
Instr. cluster
submenu via
the
Settings
menu. Use the
Instr. clus-
ter
submenu to change the instrument
cluster display settings. The following
functions are available:Selecting speedometer display mode
Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.
Press buttonj ork repeatedly
until the message
Display unit
Speed-/odometer appears in the multi-
function display.
The selection marker is on the current
setting.
Press button æ or ç to set
speedometer unit to
km or
miles
.Selecting language
Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.
Press buttonj ork repeatedly
until the message
Language
appears in
the multifunction display.
The selection marker is on the current
setting.
Press buttonæ orç to select
the language to be used for the multi-
function display messages.
Function
Page
Selecting speedometer display
mode
172
Selecting language
172
Selecting display (speed display
or outside temperature) for sta-
tus line display
173
Selecting display (speed display
or outside temperature) for basic
display
173
Page 174 of 514

173 Controls in detail
Control system
Available languages:
German
English
French
Italian
Spanish
Dutch
Danish
Swedish
Portuguese
Turkish
RussianSelecting display (speed display or out-
side temperature) for status line display
Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.
Press buttonj ork repeatedly
until the message
Status line dis-
play
appears in the multifunction dis-
play.
The selection marker is on the current
setting.
Press buttonæ orç to select
the status line to
Speed
or
Outside
temp.
.Selecting display (speed display or out-
side temperature) for basic display
Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.
Press buttonj ork repeatedly
until the message
Basic display
ap-
pears in the multifunction display.
The selection marker is on the current
setting.
Press buttonæ orç to select
the display permanently shown in the
multifunction display.
i
Russian is available for Canada vehicles
only.
i
You will see the status indicator when you
have called up a different display from the stan-
dard display.
Page 505 of 514

504 IndexL
Labels
Certification 476
Emission control information 476
Vacuum line routing diagram 477
Lamps, exterior
Exterior lamp switch 56, 141
Front 442
Messages in display 420
Rear 443
Switching on/off 141
Lamps, indicator and warning
ABS 27, 378
Battery (SmartKey) 113, 117
Brakes 381
CHECK ENGINE 382, 383
Coolant 384
Distance warning lamp* 252
Engine diagnostics 382, 383
Engine malfunction 27, 382, 383
ESP
®
27, 379, 380
Fog lamps 144
Front passenger front air bag off 29,
74, 81, 391, 392
Fuel reserve 27, 385
High beam headlamps 27Instrument cluster 378, 379, 380,
381, 382, 383, 384, 385, 388, 389
Low beam headlamps 27
Seat belt telltale 27, 386
Seat belts 386
SRS 69
Turn signals 27
Language, Setting 172
LATCH-type child seat anchors see Chil-
dren in the vehicle
License plate lamps 443
Messages in display 421
Replacing bulbs 447
Light alloy wheels, cleaning 373
Lighter see Cigarette lighter 286
Lighting
Daytime running lamp mode 143
Lighting, Exterior and interior 141
Limp-Home Mode 199
Loading 266
Split rear bench seat* 266
Loading see Vehicle loading
Locator lighting 177
Lock button
Door handle (KEYLESS-GO*) 65Locking the vehicle 61
In an emergency 436
Loss of
Key, Mechanical 119
Key, SmartKey 119
Key, SmartKey with
KEYLESS-GO* 119
Loss of Service and Warranty Information
Booklet 475
Low beam headlamps 56
Indicator lamp 27
Replacing bulbs 442
Switching on 56
Lubricants 486
Lumbar support 131
M
Maintenance 12
Calling up service indicator 367
Clearing service indicator
message 366
FSS (Canada vehicles) 365
Maintenance System (U.S.
vehicles) 365
Resetting service indicator 367
Service indicator 365
Service indicator message 365
Page 506 of 514

505 Index
Service term exceeded 366
Manual headlamp mode see Headlamps
Manual operations
Unlocking the tailgate 436
Manual shift program (E 63 AMG)
Deactivating 199
Manual shift program E 63 AMG 197
Maximum load rating, Tires 359
Maximum loaded vehicle weight, Tire infla-
tion pressure 359
Maximum tire inflation pressure 359
Mechanical key 435
Memory function see Seats
Menus see Control system menus
Minispare wheel see Spare wheel
Mirrors
Adjusting 47
Auto-dimming 200
Exterior rear view mirror 47
Exterior rear view mirror parking
positions 202
Interior rear view mirror 47
MON 322
Multicontour seat* 131Multifunction display 155
Changing settings see Control system
menus and Control system sub-
menus
Selecting language 172
Multifunction display messages
ABS 396, 411
Batteries 410
Brake fluid 411
Brake pads 410
Cargo compartment 428
Check engine 382, 383
Coolant 412, 413, 414
Cruise control 397
Distronic* 397
Door 428
Engine oil 416
ESP
®
396, 400, 411
Fog lamps 420, 421, 422, 423
Hood 428
Light sensor 422
Parking brake 411
Parking lamps 421
PRE-SAFE®
405
Reserve fuel 417SmartKey with KEYLESS-GO* 418,
419
SRS 427
Taillamps 423
Tele Aid 427
Telephone* 428
Tires 425
Turn signals 424
Windshield washer fluid 428
Multifunction steering wheel 28, 156
Button operation 156
N
NAV* menu 167
Navigation system
See separate COMAND operating
instructions 167
Net, parcel 282
Neutral gear position, Automatic
transmission 187, 189
Night security illumination 144
Normal occupant weight 359
Number, vehicle identification (VIN) 476,
477