CAB 10-45
INTERIOR TRIM PANELS
REMOVAL AND INSTALLATION
RTW 3A0MF001301
Extend Cab Model
Removal Steps
1. Sill plate
2. Dash side trim cover
▲ 3. Front pillar trim cover
▲ 4. Rear upper cushion
5. Jack cover
▲ 6. Rear end trim cover
▲ 7. Rear speaker grille/Rear speaker
▲ 8. Body side rear lower trim cover
9. Door finisher
▲ 10. Tongue side seat belt
▲ 11. Body side rear upper trim cover
Installation Steps
11. Body side rear upper trim cover
▲ 10. Tongue side seat belt
9. Door finisher
8. Body side rear lower trim cover
7. Rear speaker grille/Rear speaker
▲ 6. Rear end trim cover
5. Jack cover
4. Rear upper cushion
3. Front pillar trim assembly
2. Dash side trim cover
1. Sill plate
BACK TO CHAPTER INDEX TO MODEL INDEX
ISUZU KB P190 2007
10-46 CAB
RTW 710SH000501
Important Operations - Removal
3. Front Pillar Trim Cover • Turn up the finisher and pry the trim cover clips free
from the body panel.
Remove the trim cover by pulling upward on the lowe
r
part of it.
RTW 5A0SH000601
4. Rear Upper Cushion
• Slide the upper cushion upward to remove it.
6. Rear End Trim Cover • Pry the trim cover clips free from the body panel, and
slide the trim cover upward to remove it.
7. Rear Speaker Grille/Rear Speaker
1) Remove the rear speaker grille (1).
2) Remove the 3 screws fixing the rear speaker (2) and disconnect the connector (3).
BACK TO CHAPTER INDEX TO MODEL INDEX
ISUZU KB P190 2007
