2007 INFINITI M35 rear entertainment

AV-222
[WITH MOBILE ENTERTAINMENT SYSTEM]
TERMINALS AND REFERENCE VALUE FOR CONTROL UNIT
Revision: 2007 April2007 M35/M45
CAUTION:
When the stereo sound is played, only front RH and LH are output. When the monaural sound is played, only center is output.
All surround sounds are input only when the 5.1 channel surround sound is played.
Headphone AmpNKS004AT
Terminal
(Wire color)
ItemSignal
input/
outputCondition
Reference value
+–Ignition
switchOperation
1
(W)2
(B)Headphone signal LH Input ON When playing DVD
3 – Shield – – – –
4 – Shield – – – –
5
(L)6
(G)Headphone signal RH Input ON When playing DVD
10
(L/W)Ground Headphone ON signal Input ONHeadphone mode is ON. Approx. 4 V
Headphone mode is OFF. Approx. 0 V
11
(B/W)Ground Ground – ON – Approx. 0 V
12
(Y)Ground Battery power supply Input OFF – Approx. 12 V
14
(W/L)GroundRemote control receiver
VCCInput ON – Approx. 5 V
15
(L/O)Ground Remote control signal Output ONRear seat remote controller
operation
16 – Shield – – – –
SKIB3609E
SKIB3609E
PKIB6988J

TERMINALS AND REFERENCE VALUE FOR CONTROL UNIT
AV-223
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2007 April2007 M35/M45
Camera Control UnitNKS004AU
Terminal
(wire color)
ItemSignal
input/
outputCondition
Reference value
+–Ignition
switchOperation
5–Shield –– – –
6
(P/L)Ground Camera image signal Input ONSet selector lever in R posi-
tion, and then display the
rear view image.
7
(G/B)Ground Camera ground – ON – Approx. 0 V
8
(GR)Ground Camera ON signal Output ONSet selector lever in R posi-
tion, and then display the
rear view image.Approx. 6 V
11 – S h i e l d – – – –
12
(Y)Ground Camera image signal Output ONSet selector lever in R posi-
tion, and then display the
rear view image.
14
(V)GroundCamera-connection rec-
ognition signalOutput ON – Approx. 0 V
17
(G)–Communication signal
(L)Input/
Output–– –
18
(R)–Communication signal
(H)Input/
Output–– –
19
(R)–Communication signal
(L)Input/
Output–– –
20
(W)–Communication signal
(H)Input/
Output–– –
22
(LG)Ground Reverse signalInput/
OutputONSelect lever in R position. Approx. 12 V
Other than selector lever in
R position.Approx. 0 V
SKIB0827E
SKIB0827E

DIAGNOSIS SYSTEM
AV-227
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2007 April2007 M35/M45
On Board Diagnosis Item
*: With navigation system
STARTING PROCEDURE
1. Start the engine.
2. Turn the audio system OFF.
3. While pushing the “SETTING” button, turn the volume control
dial clockwise or counterclockwise for 40 clicks or more. (When
the self-diagnosis mode is started, a short beep will be heard.)

Shifting from current screen to previous screen is performed
by pushing “BACK” button.
Mode Description
Self Diagnosis

AV (NAVI) control unit diagnosis and connection diagnosis between
AV (NAVI) control unit and each unit

The DVD-ROM drive diagnosis of NAVI control unit and the connec-
tion diagnosis between NAVI control unit and GPS antenna can be
performed
(DVD-ROM drive will not be diagnosed when no map DVD-ROM is in
it.)
Confirmation/
AdjustmentDisplay DiagnosisThe tint can be confirmed by the color spectrum bar display. The shad-
ing of color can be confirmed by the gradation bar display.
Vehicle SignalsDiagnosis of signals can be performed for vehicle speed, parking brake,
lights, ignition switch, and reverse.
Speaker Test The connection of a speaker can be confirmed by test tone.
Climate Control Start auto air conditioner system self-diagnosis.
Navigation
*
Steering Angle
AdjustmentWhen there is a difference between the actual turning angle and the
vehicle mark turning angle, it can be adjusted.
Speed CalibrationWhen there is a difference between the current location mark and the
actual location, it can be adjusted.
Error HistoryThe system malfunction and the frequency when occurred in the past
are displayed. When the malfunctioning item is selected, the time and
place that the selected malfunction last occurred are displayed.
Synchronizer FES clock –
Vehicle CAN Diagnosis The transmitting/receiving of CAN communication can be monitored.
AV COMM DiagnosisThe communication condition of each unit of Multi AV system can be
monitored.
Handsfree PhoneThe received volume adjustment of hands-free phone, microphone
speaker check, and erase memory can be performed.
Rear DisplayTilt angle adjustment range and automatic retraction ON/OFF when
ignition switch is turned OFF can be selected
Camera Cont.The signal connected to camera control unit can be checked and the
guiding line position that overlaps rear view camera image can be
adjusted.
Bluetooth The passkey and the name of device can be checked and changed
Delete Unit Connection Log Erase the connection history of unit and error history
SKIB3655E

DIAGNOSIS SYSTEM
AV-229
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2007 April2007 M35/M45
DIAGNOSIS RESULTS
Check the applicable display in the following table, and then repair the malfunctioning parts.
Control Unit Is Red, Gray, or Yellow
Connection Line Between Units Is Yellow (Only 1 Line)
Switch color Description Possible malfunction/Action to take
Red AV (NAVI) control unit malfunction is detectedReplace AV (NAVI) control unit
Refer to AV-282, "
AV (NAVI) Control Unit"
Ye l l o w
(With NAVI)
Malfunction is detected on DVD-ROM drive pickup
lens in NAVI control unit

There is dirt and damage on the map disc

Map disc

NAVI control unit
Gray
(With NAVI)DVD-ROM not inserted is detected Insert map disc
Applicable parts Description Probable malfunction location
Control unit to Camera Cont.Camera-connection recognition signal malfunc-
tion is detected

Camera control unit power supply and ground
circuit

Camera-connection recognition signal circuit

AV (NAVI) Control unit

Camera control unit
Control unit to GPS Antenna GPS antenna connection malfunction is detected

GPS antenna feeder

GPS antenna

NAVI control unit
Control unit to DVD deck

DVD player power supply and ground circuit
malfunction is detected

Malfunction is detected on communication sig-
nal between DVD player and AV (NAVI) control
unit

DVD player power supply and ground circuit

DVD player

AV (NAVI) control unit
Control unit to Amplifier

BOSE amp power supply and ground circuit
malfunction is detected

Malfunction is detected on communication sig-
nal between BOSE amp and AV (NAVI) control
unit

BOSE amp power supply and ground circuit

BOSE amp

AV (NAVI) control unit
Control unit to Video Distrib-
utor

Video distributor power supply and ground cir-
cuit malfunction is detected

Malfunction is detected on communication sig-
nal between video distributor and AV (NAVI)
control unit

Video distributor power supply and ground cir-
cuit

Video distributor

AV (NAVI) control unit
Control unit to Front Display

Front display unit power supply and ground cir-
cuit malfunction is detected (The diagnosis
screen can be checked at rear display)

Malfunction is detected on communication cir-
cuit between front display unit and AV (NAVI)
control unit

Malfunction is detected on communication sig-
nal between front display unit and AV (NAVI)
control unit

Front display unit power supply and ground cir-
cuit

Front display unit

AV (NAVI) control unit
Control unit to Rear Switches

Rear control switch power supply and ground
circuit malfunction is detected

Malfunction is detected on communication sig-
nal between rear control switch and AV (NAVI)
control unit

Rear control switch power supply and ground
circuit

Rear control switch

AV (NAVI) control unit

AV-230
[WITH MOBILE ENTERTAINMENT SYSTEM]
DIAGNOSIS SYSTEM
Revision: 2007 April2007 M35/M45
Connection Line Between Units Is Yellow (2 or More Lines)
When 2 or more connection lines between control unit (AV control unit, NAVI control) and each unit are dis-
played in yellow, these communication system lines may be open or shorted. The malfunctioning parts can be
detected by the combination of the connection lines displayed in yellow.
Control unit to Audio unit

Audio unit power supply and ground circuit mal-
function is detected

Malfunction is detected on communication cir-
cuit between audio unit and rear control switch
(Models with rear control switch)

Malfunction is detected on communication cir-
cuit between audio unit and BOSE amp (Mod-
els without rear control switch)

Malfunction is detected on communication sig-
nal between audio unit and AV (NAVI) control
unit

Audio unit power supply and ground circuit

Communication circuit between rear control
switch and audio unit

Audio unit

Rear control switch (with rear control switch)

BOSE amp (without rear control switch)

AV (NAVI) Control unit
Video distributor to Rear Dis-
play

Rear display unit power supply and ground cir-
cuit malfunction is detected

Malfunction is detected on communication cir-
cuit between video distributor and rear display
unit

Malfunction is detected on communication sig-
nal between video distributor and rear display
unit

Rear display unit power supply and ground cir-
cuit

Rear display unit

Video distributor

Communication circuit between video distribu-
tor and rear display unit Applicable parts Description Probable malfunction location
Applicable parts Description Probable malfunction location
Control unit to

Amplifier

Rear Switches

Audio unit

Malfunction is detected on communication cir-
cuit between multifunction switch and camera
control unit

Malfunction is detected on communication cir-
cuit between camera control unit and BOSE
amp

Communication circuit between multifunction
switch and camera control unit

Communication circuit between camera control
unit and BOSE amp

Multifunction switch

Camera control unit

BOSE amp
Control unit to

Amplifier

Audio unit

Malfunction is detected on communication cir-
cuit between multifunction switch and camera
control unit

Malfunction is detected on communication cir-
cuit between camera control unit and BOSE
amp

Communication circuit between multifunction
switch and camera control unit

Communication circuit between camera control
unit and BOSE amp

Multifunction switch

Camera control unit

BOSE amp
Control unit to

Rear Switches

Audio unitMalfunction is detected on communication circuit
between BOSE amp and rear control switch

Communication circuit between BOSE amp and
rear control switch

BOSE amp

Rear control switch

AV-232
[WITH MOBILE ENTERTAINMENT SYSTEM]
DIAGNOSIS SYSTEM
Revision: 2007 April2007 M35/M45
VEHICLE SIGNALS
A comparison check can be made of each actual vehicle signal and
the signals recognized by the system.
SPEAKER TEST
When selecting “Speaker Test”, speaker diagnosis screen is dis-
played. When pressing “Start”, test tone emits from the speaker. At
that time, when pressing “Start”, test tone emits from next speaker.
Then, when pressing the “End”, test tone stops.
NOTE:
The frequency of test tone emitted from each speaker is as follows.
CLIMATE CONTROL
For details, refer to AT C - 5 6 , "Self-diagnosis Function" .
SKIB3663E
Diagnosis item Display Vehicle status Remarks
Vehicle speedON Vehicle speed > 0 km/h (0 MPH)
Changes in indication may be delayed by approxi-
mately 1.5 seconds. This is normal. OFF Vehicle speed = 0 km/h (0 MPH)
- Ignition switch in ACC position
Parking brakeON Parking brake is applied.
OFF Parking brake is released.
LightsON Light switch ON
–
OFF Light switch OFF
IgnitionON Ignition switch ON
-
OFF Ignition switch in ACC position
ReverseON Selector lever in R position
Changes in indication may be delayed by approxi-
mately 1.5 seconds. This is normal. OFF Selector lever in any position other than R
- Ignition switch in ACC position
Tweeter : 3 kHz
Front door speaker : 300 Hz
Rear door speaker : 1 kHz
Rear surround speaker : 1 kHz
Center speaker : 1 kHz
Woofer : 100 Hz
Seat speaker : 1 kHz
SKIB3664E

AV-234
[WITH MOBILE ENTERTAINMENT SYSTEM]
DIAGNOSIS SYSTEM
Revision: 2007 April2007 M35/M45
With NAVI
Count Down Type

When the error is detected, set the counter to 40. If the system is normal when turning the ignition switch
ON, the counter decreases by 1.

The lower limit of the counter is 1. It can be reset to 0 by “Delete log” switch or CONSULT-II.
Count Up Type

When the ignition switch is turned ON if the error is detected, the counter increases 1. Even if it is normal
when the ignition switch is turned ON the next time, the counter does not decrease.

The upper limit of the counter is 50. 51 or more is displayed as 50. It can be reset to 0 by “Delete log”
switch or CONSULT-II.
Error Item
Some error items may be displayed simultaneously according to the cause. If some error items are displayed
simultaneously, the detection of the cause can be performed by the combination of display items
SKIB3687E
Display type of occur-
rence frequencyError history display item
Count down type CAN_COMM_CIRCUIT, CONTROL UNIT (CAN), AV COMM CIRCUIT, CONTROL UNIT (AV)
Count up type Other than the above
Error item Description Possible cause/Action to take
CAN_COMM_CIRCUITCAN communication malfunction is
detectedPerform the diagnosis using CONSULT-II,
and then repair the malfunctioning parts
based on diagnostic results.
Refer to AV-243, "
SELF-DIAG RESULTS"
.
CONTROL UNIT (CAN) CAN initial diagnosis malfunction is
detectedReplace AV (NAVI) control unit
Refer to AV-282, "
AV (NAVI) Control Unit"
CONTROL UNIT (AV) AV communication circuit initial diagno-
sis malfunction is detectedReplace AV (NAVI) control unit
Refer to AV-282, "AV (NAVI) Control Unit"

AV COMM CIRCUIT

Switches Connection Error

Video Distributor Connection Error

DVD Deck Connection Error

Audio Unit Connection Error

Amplifier Connection Error

Rearview Camera Connection ErrorMalfunction is detected on communi-
cation circuit between AV (NAVI) con-
trol unit and video distributor

Communication circuit between AV
(NAVI) control unit and video distributor

AV (NAVI) control unit

Video distributor

DIAGNOSIS SYSTEM
AV-235
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2007 April2007 M35/M45

AV COMM CIRCUIT

Switches Connection Error

DVD Deck Connection Error

Audio Unit Connection Error

Amplifier Connection Error

Rearview Camera Connection ErrorMalfunction is detected on communi-
cation circuit between video distributor
and DVD player

Communication circuit between video
distributor and DVD player

Video distributor

DVD player

AV COMM CIRCUIT

Switches Connection Error

Audio Unit Connection Error

Amplifier Connection Error

Rearview Camera Connection ErrorMalfunction is detected on communi-
cation circuit between DVD player and
multifunction switch

Communication circuit between DVD
player and multifunction switch

DVD player

Multifunction switch

AV COMM CIRCUIT

Audio Unit Connection Error

Amplifier Connection Error

Rearview Camera Connection ErrorMalfunction is detected on communi-
cation circuit between multifunction
switch and camera control unit

Communication circuit between multi-
function switch and camera control unit

Multifunction switch

Camera control unit

AV COMM CIRCUIT

Audio Unit Connection Error

Amplifier Connection ErrorMalfunction is detected on communi-
cation circuit between camera control
unit and BOSE amp

Communication circuit between camera
control unit and BOSE amp

Camera control unit

BOSE amp

AV COMM CIRCUIT

Audio Unit Connection ErrorWith rear control switch

Audio unit power supply and ground
circuit malfunction is detected

Malfunction is detected on communi-
cation circuit between BOSE amp
and rear control switch

Malfunction is detected on communi-
cation circuit between rear control
switch and audio unit

Malfunction is detected on communi-
cation signal between audio unit and
AV ( N AV I ) c o n t r o l u n i t

Communication circuit between BOSE
amp and rear control switch

Communication circuit between rear
control switch and audio unit

BOSE amp

Rear control switch

Audio unit

AV ( N AV I ) c o n t r o l u n i t
Without rear control switch

Audio unit power supply and ground
circuit malfunction is detected

Malfunction is detected on communi-
cation circuit between BOSE amp
and audio unit

Malfunction is detected on communi-
cation signal between audio unit and
AV ( N AV I ) c o n t r o l u n i t

Audio unit power supply and ground cir-
cuit

Communication circuit between BOSE
amp and audio unit

Audio unit

AV ( N AV I ) c o n t r o l u n i t

BOSE amp

AV COMM CIRCUIT

Video Distributor Connection Error

Video distributor power supply and
ground circuit malfunction is
detected

Malfunction is detected on communi-
cation signal between video distribu-
tor and AV (NAVI) control unit

Video distributor power supply and
ground circuit

Video distributor

AV ( N AV I ) c o n t r o l u n i t

AV COMM CIRCUIT

Rearview Camera Connection Error

Camera control unit power supply
and ground circuit malfunction is
detected

Malfunction is detected on communi-
cation signal between camera con-
trol unit and AV (NAVI) control unit

Camera control unit power supply and
ground circuit

Camera control unit

AV ( N AV I ) c o n t r o l u n i t Error item Description Possible cause/Action to take