2007 INFINITI M35 thermostat

CO-58
[VK45DE]
SERVICE DATA AND SPECIFICATIONS (SDS)
Revision: 2007 April2007 M35/M45
SERVICE DATA AND SPECIFICATIONS (SDS)PFP:00030
Standard and LimitNBS004RT
ENGINE COOLANT CAPACITY (APPROXIMATE)
Unit: (US qt, Imp qt)
RADIATOR
Unit: kPa (kg/cm2 , psi)
THERMOSTAT
WATER CONTROL VALVE
Engine coolant capacity (With reservoir tank at “MAX” level) 10.4 (11, 9-1/8)
Reservoir tank engine coolant capacity (at “MAX” level) 0.8 (7/8, 3/4)
Radiator cap relief pressureStandard 78 - 98 (0.8 - 1.0, 11 - 14)
Limit 59 (0.6, 9)
Leakage testing pressure 157 (1.6, 23)
ThermostatStandard
Valve opening temperature 80 - 84°C (176 - 183°F)
Maximum valve lift More than 10 mm/95°C (0.39 in/203°F)
Valve closing temperature 77°C (171°F)
Water control valveStandard
Valve opening temperature 93.5 - 96.5°C (200 - 206°F)
Maximum valve lift More than 8 mm/108°C (0.315 in/226°F)
Valve closing temperature 90°C (194°F)

EC-3
C
D
E
F
G
H
I
J
K
L
M
ECA
Revision: 2007 April2007 M35/M45 On Board Diagnosis Logic ................................... 229
DTC Confirmation Procedure ............................... 229
Diagnostic Procedure ........................................... 230
Component Inspection ......................................... 231
Removal and Installation ...................................... 231
DTC P0128 THERMOSTAT FUNCTION ................ 232
On Board Diagnosis Logic ................................... 232
DTC Confirmation Procedure ............................... 232
Diagnostic Procedure ........................................... 232
Component Inspection ......................................... 233
Removal and Installation ...................................... 233
DTC P0130, P0150 A/F SENSOR 1 ....................... 234
Component Description ........................................ 234
CONSULT-II Reference Value in Data Monitor Mode
. 234
On Board Diagnosis Logic ................................... 234
DTC Confirmation Procedure ............................... 234
Overall Function Check ........................................ 236
Wiring Diagram .................................................... 237
Diagnostic Procedure ........................................... 240
Removal and Installation ...................................... 243
DTC P0131, P0151 A/F SENSOR 1 ....................... 244
Component Description ........................................ 244
CONSULT-II Reference Value in Data Monitor Mode
. 244
On Board Diagnosis Logic ................................... 244
DTC Confirmation Procedure ............................... 244
Wiring Diagram .................................................... 246
Diagnostic Procedure ........................................... 249
Removal and Installation ...................................... 252
DTC P0132, P0152 A/F SENSOR 1 ....................... 253
Component Description ........................................ 253
CONSULT-II Reference Value in Data Monitor Mode
. 253
On Board Diagnosis Logic ................................... 253
DTC Confirmation Procedure ............................... 253
Wiring Diagram .................................................... 255
Diagnostic Procedure ........................................... 258
Removal and Installation ...................................... 261
DTC P0133, P0153 A/F SENSOR 1 ....................... 262
Component Description ........................................ 262
CONSULT-II Reference Value in Data Monitor Mode
. 262
On Board Diagnosis Logic ................................... 262
DTC Confirmation Procedure ............................... 263
Wiring Diagram .................................................... 265
Diagnostic Procedure ........................................... 268
Removal and Installation ...................................... 273
DTC P0137, P0157 HO2S2 .................................... 274
Component Description ........................................ 274
CONSULT-II Reference Value in Data Monitor Mode
. 274
On Board Diagnosis Logic ................................... 274
DTC Confirmation Procedure ............................... 275
Overall Function Check ........................................ 275
Wiring Diagram .................................................... 277
Diagnostic Procedure ........................................... 280
Component Inspection ......................................... 282
Removal and Installation ...................................... 284DTC P0138, P0158 HO2S2 .....................................285
Component Description ........................................285
CONSULT-II Reference Value in Data Monitor Mode
.285
On Board Diagnosis Logic ....................................285
DTC Confirmation Procedure ...............................286
Overall Function Check ........................................287
Wiring Diagram .....................................................288
Diagnostic Procedure ...........................................291
Component Inspection ..........................................295
Removal and Installation ......................................297
DTC P0139, P0159 HO2S2 .....................................298
Component Description ........................................298
CONSULT-II Reference Value in Data Monitor Mode
.298
On Board Diagnosis Logic ....................................298
DTC Confirmation Procedure ...............................299
Overall Function Check ........................................299
Wiring Diagram .....................................................301
Diagnostic Procedure ...........................................304
Component Inspection ..........................................306
Removal and Installation ......................................308
DTC P0171, P0174 FUEL INJECTION SYSTEM
FUNCTION ..............................................................309
On Board Diagnosis Logic ....................................309
DTC Confirmation Procedure ...............................309
Wiring Diagram .....................................................311
Diagnostic Procedure ...........................................315
DTC P0172, P0175 FUEL INJECTION SYSTEM
FUNCTION ..............................................................320
On Board Diagnosis Logic ....................................320
DTC Confirmation Procedure ...............................320
Wiring Diagram .....................................................322
Diagnostic Procedure ...........................................326
DTC P0181 FTT SENSOR ......................................331
Component Description ........................................331
On Board Diagnosis Logic ....................................331
DTC Confirmation Procedure ...............................331
Wiring Diagram .....................................................333
Diagnostic Procedure ...........................................334
Component Inspection ..........................................336
Removal and Installation ......................................336
DTC P0182, P0183 FTT SENSOR ..........................337
Component Description ........................................337
On Board Diagnosis Logic ....................................337
DTC Confirmation Procedure ...............................337
Wiring Diagram .....................................................338
Diagnostic Procedure ...........................................339
Component Inspection ..........................................341
Removal and Installation ......................................341
DTC P0222, P0223 TP SENSOR ............................342
Component Description ........................................342
CONSULT-II Reference Value in Data Monitor Mode
.342
On Board Diagnosis Logic ....................................342
DTC Confirmation Procedure ...............................343
Wiring Diagram .....................................................344
Diagnostic Procedure ...........................................345

EC-10Revision: 2007 April2007 M35/M45 DTC P0127 IAT SENSOR .......................................942
Component Description ........................................942
On Board Diagnosis Logic ....................................942
DTC Confirmation Procedure ...............................942
Diagnostic Procedure ...........................................943
Component Inspection ..........................................944
Removal and Installation ......................................944
DTC P0128 THERMOSTAT FUNCTION .................945
On Board Diagnosis Logic ....................................945
DTC Confirmation Procedure ...............................945
Diagnostic Procedure ...........................................945
Component Inspection ..........................................946
Removal and Installation ......................................946
DTC P0130, P0150 A/F SENSOR 1 ........................947
Component Description ........................................947
CONSULT-II Reference Value in Data Monitor Mode
.947
On Board Diagnosis Logic ....................................947
DTC Confirmation Procedure ...............................947
Overall Function Check ........................................949
Wiring Diagram .....................................................950
Diagnostic Procedure ...........................................953
Removal and Installation ......................................956
DTC P0131, P0151 A/F SENSOR 1 ........................957
Component Description ........................................957
CONSULT-II Reference Value in Data Monitor Mode
.957
On Board Diagnosis Logic ....................................957
DTC Confirmation Procedure ...............................957
Wiring Diagram .....................................................959
Diagnostic Procedure ...........................................962
Removal and Installation ......................................965
DTC P0132, P0152 A/F SENSOR 1 ........................966
Component Description ........................................966
CONSULT-II Reference Value in Data Monitor Mode
.966
On Board Diagnosis Logic ....................................966
DTC Confirmation Procedure ...............................966
Wiring Diagram .....................................................968
Diagnostic Procedure ...........................................971
Removal and Installation ......................................974
DTC P0133, P0153 A/F SENSOR 1 ........................975
Component Description ........................................975
CONSULT-II Reference Value in Data Monitor Mode
.975
On Board Diagnosis Logic ....................................975
DTC Confirmation Procedure ...............................976
Wiring Diagram .....................................................978
Diagnostic Procedure ...........................................981
Removal and Installation ......................................986
DTC P0137, P0157 HO2S2 .....................................987
Component Description ........................................987
CONSULT-II Reference Value in Data Monitor Mode
.987
On Board Diagnosis Logic ....................................987
DTC Confirmation Procedure ...............................988
Overall Function Check ........................................988
Wiring Diagram .....................................................990
Diagnostic Procedure ...........................................993Component Inspection ..........................................996
Removal and Installation .......................................997
DTC P0138, P0158 HO2S2 .....................................998
Component Description ........................................998
CONSULT-II Reference Value in Data Monitor Mode
.998
On Board Diagnosis Logic ....................................998
DTC Confirmation Procedure ................................999
Overall Function Check ........................................1000
Wiring Diagram ....................................................1001
Diagnostic Procedure ...........................................1004
Component Inspection .........................................1009
Removal and Installation ......................................1010
DTC P0139, P0159 HO2S2 ....................................1011
Component Description .......................................1011
CONSULT-II Reference Value in Data Monitor Mode
1011
On Board Diagnosis Logic ...................................1011
DTC Confirmation Procedure ...............................1012
Overall Function Check ........................................1012
Wiring Diagram ....................................................1014
Diagnostic Procedure ...........................................1017
Component Inspection .........................................1020
Removal and Installation ......................................1021
DTC P0171, P0174 FUEL INJECTION SYSTEM
FUNCTION .............................................................1022
On Board Diagnosis Logic ...................................1022
DTC Confirmation Procedure ...............................1022
Wiring Diagram ....................................................1024
Diagnostic Procedure ...........................................1028
DTC P0172, P0175 FUEL INJECTION SYSTEM
FUNCTION .............................................................1033
On Board Diagnosis Logic ...................................1033
DTC Confirmation Procedure ...............................1033
Wiring Diagram ....................................................1035
Diagnostic Procedure ...........................................1039
DTC P0181 FTT SENSOR .....................................1043
Component Description .......................................1043
On Board Diagnosis Logic ...................................1043
DTC Confirmation Procedure ...............................1043
Wiring Diagram ....................................................1045
Diagnostic Procedure ...........................................1046
Component Inspection .........................................1048
Removal and Installation ......................................1048
DTC P0182, P0183 FTT SENSOR .........................1049
Component Description .......................................1049
On Board Diagnosis Logic ...................................1049
DTC Confirmation Procedure ...............................1049
Wiring Diagram ....................................................1050
Diagnostic Procedure ...........................................1051
Component Inspection .........................................1053
Removal and Installation ......................................1053
DTC P0222, P0223 TP SENSOR ...........................1054
Component Description .......................................1054
CONSULT-II Reference Value in Data Monitor Mode
1054
On Board Diagnosis Logic ...................................1054
DTC Confirmation Procedure ...............................1055
Wiring Diagram ....................................................1056

EC-96
[VQ35DE]
TROUBLE DIAGNOSIS
Revision: 2007 April2007 M35/M45
DTC Inspection Priority ChartNBS004SZ
If some DTCs are displayed at the same time, perform inspections one by one based on the following priority
chart.
NOTE:

If DTC U1000 or U1001 is displayed with other DTC, first perform the trouble diagnosis for DTC
U1000, U1001. Refer to EC-161, "
DTC U1000, U1001 CAN COMMUNICATION LINE" .

If DTC U1010 is displayed with other DTC, first perform the trouble diagnosis for DTC U1010. Refer
to EC-164, "
DTC U1010 CAN COMMUNICATION" .
Priority Detected items (DTC)
1

U1000 U1001 CAN communication line

U1010 CAN communication

P0101 P0102 P0103 Mass air flow sensor

P0112 P0113 P0127 Intake air temperature sensor

P0117 P0118 P0125 Engine coolant temperature sensor

P0122 P0123 P0222 P0223 P1225 P1226 P2135 Throttle position sensor

P0128 Thermostat function

P0181 P0182 P0183 Fuel tank temperature sensor

P0327 P0328 Knock sensor

P0335 Crankshaft position sensor (POS)

P0340 P0345 Camshaft position sensor (PHASE)

P0460 P0461 P0462 P0463 Fuel level sensor

P0500 Vehicle speed sensor

P0643 Sensor power supply

P0605 ECM

P0700 TCM

P0705 P0850 Park/Neutral position (PNP) switch

P1550 P1551 P1552 P1553 P1554 Battery current sensor

P1610 - P1615 NATS

P2122 P2123 P2127 P2128 P2138 Accelerator pedal position sensor

EC-102
[VQ35DE]
TROUBLE DIAGNOSIS
Revision: 2007 April2007 M35/M45
1 - 6: The numbers refer to the order of inspection.Exhaust Exhaust manifold/Tube/Muffler/
Gasket
55555 55 5EM-28
, EX-
3Three way catalyst
Lubrica-
tionOil pan/Oil strainer/Oil pump/Oil
filter/Oil gallery/Oil cooler
55555 55 5EM-31
, LU-
19 , LU-11 ,
LU-15
Oil level (Low)/Filthy oilLU-7
Cooling
Radiator/Hose/Radiator filler cap
55555 55 45CO-14,
CO-18
Thermostat 5CO-29
Water pumpCO-24
Water galleryCO-31
Cooling fan
5CO-22
Coolant level (Low)/Contami-
nated coolantCO-11
IVIS (INFINITI Vehicle Immobilizer System —
NATS)11EC-53 or
BL-244
SYMPTOM
Reference
page
HARD/NO START/RESTART (EXCP. HA)
ENGINE STALL
HESITATION/SURGING/FLAT SPOT
SPARK KNOCK/DETONATION
LACK OF POWER/POOR ACCELERATION
HIGH IDLE/LOW IDLE
ROUGH IDLE/HUNTING
IDLING VIBRATION
SLOW/NO RETURN TO IDLE
OVERHEATS/WATER TEMPERATURE HIGH
EXCESSIVE FUEL CONSUMPTION
EXCESSIVE OIL CONSUMPTION
BATTERY DEAD (UNDER CHARGE)
Warranty symptom code AA AB AC AD AE AF AG AH AJ AK AL AM HA

EC-226
[VQ35DE]
DTC P0125 ECT SENSOR
Revision: 2007 April2007 M35/M45
DTC P0125 ECT SENSORPFP:22630
Component DescriptionNBS004VR
NOTE:
If DTC P0125 is displayed with P0117 or P0118, first perform the trouble diagnosis for DTC P0117 or
P0118. Refer to EC-214, "
DTC P0117, P0118 ECT SENSOR" .
The engine coolant temperature sensor is used to detect the engine
coolant temperature. The sensor modifies a voltage signal from the
ECM. The modified signal returns to the ECM as the engine coolant
temperature input. The sensor uses a thermistor which is sensitive to
the change in temperature. The electrical resistance of the ther-
mistor decreases as temperature increases.

*: This data is reference value and is measured between ECM terminal 73 (Engine
coolant temperature sensor) and ground.
CAUTION:
Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in dam-
age to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.
On Board Diagnosis LogicNBS004VS
SEF594K
Engine coolant
temperature°C (°F)Voltage* V Resistance kΩ
–10 (14) 4.4 7.0 - 11.4
20 (68) 3.5 2.1 - 2.9
50 (122) 2.2 0.68 - 1.00
90 (194) 0.9 0.236 - 0.260
SEF012P
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0125
0125Insufficient engine cool-
ant temperature for
closed loop fuel control

Voltage sent to ECM from the sensor is not
practical, even when some time has passed
after starting the engine.

Engine coolant temperature is insufficient for
closed loop fuel control.

Harness or connectors
(High resistance in the circuit)

Engine coolant temperature sensor

Thermostat

EC-228
[VQ35DE]
DTC P0125 ECT SENSOR
Revision: 2007 April2007 M35/M45
3. CHECK THERMOSTAT OPERATION
When the engine is cold [lower than 70°C (158°F)] condition, grasp lower radiator hose and confirm the engine
coolant does not flow.
OK or NG
OK >> GO TO 4.
NG >> Repair or replace thermostat. Refer to CO-29, "
WATER INLET AND THERMOSTAT ASSEMBLY"
.
4. CHECK INTERMITTENT INCIDENT
Refer to EC-153, "
TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT" .
Refer to EC-216, "
Wiring Diagram" .
>>INSPECTION END
Component InspectionNBS004VV
ENGINE COOLANT TEMPERATURE SENSOR
1. Check resistance between engine coolant temperature sensor
terminals 1 and 2 as shown in the figure.

2. If NG, replace engine coolant temperature sensor.
Removal and InstallationNBS004VW
ENGINE COOLANT TEMPERATURE SENSOR
Refer to CO-31, "WATER OUTLET AND WATER PIPING" .
PBIB2005E
Temperature°C (°F) Resistance kΩ
20 (68) 2.1 - 2.9
50 (122) 0.68 - 1.00
90 (194) 0.236 - 0.260
SEF012P

EC-232
[VQ35DE]
DTC P0128 THERMOSTAT FUNCTION
Revision: 2007 April2007 M35/M45
DTC P0128 THERMOSTAT FUNCTIONPFP:21200
On Board Diagnosis LogicNBS004W3
Engine coolant temperature has not risen enough to open the thermostat even though the engine has run long
enough.
This is due to a leak in the seal or the thermostat stuck open.
DTC Confirmation ProcedureNBS004W4
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
TESTING CONDITION:

For best results, perform at ambient temperature of –10°C (14°F) or higher.

For best results, perform at engine coolant temperature of –10°C (14°F) to 60°C (140°F).
WITH CONSULT-II
1. Replace thermostat with new one. Refer to CO-29, "WATER INLET AND THERMOSTAT ASSEMBLY" .
Use only a genuine NISSAN thermostat as a replacement. If an incorrect thermostat is used, the MIL may
come on.
2. Turn ignition switch ON.
3. Select “COOLAN TEMP/S” in “DATA MONITOR” mode with
CONSULT-II.
4. Check that the “COOLAN TEMP/S” is above 60°C (140°F).
If it is below 60°C (140°F), go to following step.
If it is above 60°C (140°F), cool down the engine to less than
60°C (140°F), then retry from step 1.
5. Drive vehicle for 10 consecutive minutes under the following
conditions.
If 1st trip DTC is detected, go to EC-232, "
Diagnostic Procedure"
.
WITH GST
Follow the procedure “WITH CONSULT-II” above.
Diagnostic ProcedureNBS004W5
1. CHECK ENGINE COOLANT TEMPERATURE SENSOR
Refer to EC-233, "
Component Inspection" .
OK or NG
OK >>INSPECTION END
NG >> Replace engine coolant temperature sensor.
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0128
0128Thermostat functionThe engine coolant temperature does not
reach to specified temperature even though
the engine has run long enough.

Thermostat

Leakage from sealing portion of thermo-
stat

Engine coolant temperature sensor
VHCL SPEED SE 80 - 120 km/h (50 - 75 MPH)
PBIB1917E