2007 GMC ACADIA ignition

The HeadUp
Display (HUD)projects arange of vehicleinformation onthe windshield,reducing the need to look away from theroad. The information appears as an
image toward the front of the vehicle.
The information displayed by the HUDmay include the speedometer reading,RPM reading, transmission position,outside air temperature, highbeamheadlamps and turn signal indicators, abrief display of the current radio station
or CD track, and TurnbyTurnNavigation information (if equipped).
The following HUD controls are located
on the instrument panel to the right ofthe steering wheel:
(Off): To turn off the HUD image,
rotate the dimming knob fullycounterclockwise.
Brightness: Rotate the dimming knob
clockwise to brighten and counterclock
wise to dim the HUD image.
(Up) (Down):Press the up or
down arrow to adjust the position of theHUD image on the windshield. (It cannotbe adjusted sidetoside.)
5
HeadUp Display (if equipped)
Customization Settings with DIC
Buttons
To customize features:
1. With the vehicle in Park, turn on the
ignition.
2. Press the (Customization) button
to enter the Feature Settings menu.
3. Press the button to scroll through
the available customization features.
4. With the desired feature displayed,
press the (Set/Reset) button toaccess the settings.
5. Press the button to scroll through
the available settings.
6. With the desired setting displayed,
press the button to select it.
7.Press the button to scroll to the
next available customization feature.
8. To exit the Feature Settings menu,
press the button until FEATURE
SETTINGS EXIT is displayed, and
then press the button; or press
the button or the button.
Warnings and Messages
The DIC provides a variety of vehicle
warning messages (depending onoptional equipment) if a problem is
sensed in a vehicle system. To acknowledge a message and clear it from the
display, press the DIC reset stem or anyDIC button. Some urgent messages
cannot be cleared from the DIC display.
If you have a current OnStar subscrip
tion, and a warning message appears,you can press the blue OnStar buttonand speak to an OnStar Advisor. In
many vehicles, OnStar Advisors can
access certain diagnostic information
and can tell you how serious the problem is and what you should do about it.
See Section 3 of your Owner Manual.
Note: Your vehicle’s warnings and mes
sages provide critical information thatcan prevent damage to your vehicle.Review your Owner Manual to becomefamiliar with the information displayedand the action required.
Acadia 2007 A 10/3/06 3:07 PM Page 5

Getting to Know YourAcadia6
If you change your seat position, you
may have to readjust the HUD image forproper viewing.
(Page):Press and hold this button to
change the display format. Release thebutton when the desired display isshown.
If the ignition is on and you cannot see
the HUD image, check to see whether:
• Something is covering the HUD lens
• The brightness is adjusted properly
• The HUD image is adjusted to the
proper height
• The windshield and HUD lens are
clean (do not spray glass cleaner
directly on the HUD lens)
• You are wearing polarized sunglass
es, which could make the imageharder to see
• A fuse is blown (see your Owner
Manual)
See Section 3 of your Owner Manual.
(Lock):Press this button to lock all
the doors. RKE feedback (light flashand/or horn chirp) can be programmedusing the Driver Information Center(DIC).
(Unlock):Press this button to unlock
the driver’s door. Press it again withinfive seconds to unlock all remainingdoors. RKE feedback (light flash) can beprogrammed using the DIC.
(Power Liftgate)(if equipped):
Press and hold this button until the liftgate starts moving to open and close
the liftgate. The taillamps will flash and
a chime will sound when the liftgate ismoving.
(Vehicle Locator/Panic Alarm):Press and release this button to locate
your vehicle. The turn signal lamps will
flash and the horn will sound three
times.
Press and hold the button to activate the
panic alarm. The turn signal lamps willflash and the horn will sound for 30 sec
onds. Press the button again or turn theignition to On to cancel the panic alarm.
See Section 2 of your Owner Manual.Remote Keyless Entry
SAFETY & SECURITY
The Remote
Keyless Entry (RKE)transmitter allowsyou to lock andunlock your vehicleand perform otherfunctions while up toapproximately 195feet away from thevehicle. RKE functions include:
(Remote Vehicle Start)(if
equipped): This feature can be used to
start the engine from outside the vehicle.
(See Remote Vehicle Start.)
OnStar®
The OnStar system provides invehicle
safety, security and phone services,available 24 hours a day, 7 days a
week. These services are easily
accessed through the three OnStarbuttons in your vehicle.
For more information about OnStar
features, refer to the OnStar Owner’s
Guide and enclosed audio CD located
inyour glove box.
See Section 2 of your Owner Manual.
Acadia 2007 A 10/3/06 3:07 PM Page 6

9
3rdRow Seats
The 3rdrow 60/40 split bench seat
features folding seatbacks. Prior to folding a seatback, make sure all of theseatbelts are unbuckled, nothing is onthe 3rdrow seat, and the 2ndrow seatis not reclined.
Lift the lever (A) on the upperback out
board corner of the seatback until thehead restraint folds forward, and thenfold down the seatback.
To return the seatback to the upright
position, pull the seatback strap (B) from
the rear of the vehicle or lift up the seat
back from inside the vehicle. Pull on theseatback to make sure it is locked inplace. Lift up the head restraint to lock itin place.
See Section 1 of your Owner Manual.
The following heated front seat controls
are located on the center console infront of the shift lever:
(Heated Seat/Seatback):Press the
bottom button to turn on the heated seatcushion and seatback.
(Heated Seatback):Press the top
button to turn on the heated seatback.
Heated Seat Controls
(if equipped)
Memory settings can be programmed for
the position of the driver’s seat and outside mirrors. The memory buttons are
located on the driver’s door.
To save memory settings:
1. Adjust the driver’s seat and outside
mirrors to the desired position.
2. Press and hold button 1 until two
beeps sound.
Repeat these steps using button 2 for a
second driver.
To recall the memory settings, press
button 1 or 2 with the vehicle in Park.
The memory seat setting also can beprogrammed in the DIC to be recalledautomatically when using the RemoteKeyless Entry transmitter.
Easy Exit Seat
With the vehicle in Park, press the
(Easy Exit Seat) button to recall the exit
position for the driver’s seat. The easy
exit seat setting also can be pro
grammed in the DIC to be recalled whenremoving the key from the ignition.
See Section 1 of your Owner Manual.
Memory Seats and Mirrors
(if equipped)
Continue to press the desired button to
cycle through the temperature settingsof High (three indicator lights), Medium(two indicator lights), Low (one indicator
light), and Off (no indicator lights).
See Section 1 of your Owner Manual.
A
B
Acadia 2007 A 10/3/06 3:07 PM Page 9

15
Rear Seat Audio and DVD
Rear Seat EntertainmentSystems (if equipped)
Rear Seat Audio
The Rear Seat Audio (RSA) system
allows front seat and rear seat passen
gers to listen to different entertainmentsources at the same time using the rearseat controls and wired (not supplied) orwireless (if equipped) headphones.
To select an entertainment source
(radio, CD, or DVD, if equipped):
•Press the SRCE (Source) button.
To adjust the volume:
•Turn the left volume knob to adjust
the left wired headphones and the
right volume knob to adjust the rightwired headphones. On wireless head
phones, adjust volume using theheadphone volume control.
DVD Rear Seat Entertainment
The Rear Seat Entertainment (RSE)
system includes a CD/DVD player aspart of the front radio, a video display
you locate a variety of points of interest,
such as banks, airports and restaurants.
Refer to your Navigation Entertainment
System Owner Manual for operatinginstructions.
See Section 3 of your Owner Manual.
screen, audio/video jacks, two wireless
headphones, and a remote control.
To play a DVD:
1. Turn the ignition to the Accessory or
On position.
2. Push the release button on the DVD
display console to fold down thevideo screen.
3. Insert a DVD into the DVD slot in the
radio. It will turn on the video screenand begin playing automatically. It
may be necessary to press the Playpushbutton on the radio or the remotecontrol to start playing the movie ifthe DVD stops at a menu screen.
4. To listen to the DVD through the vehi
cle speakers, press the DVD/CD AUX
button. Adjust volume using the radio
volume control.
To listen to the DVD through the
headphones, press the On/Off buttonon the headphones. Adjust volume
using the headphone volume control.
5. To control DVD playback, use the
remote control or the front radiopushbuttons.
Parental Control
The Parental Control feature turns off
the video screen and Rear Seat Audio to
help gain the attention of rear passen
gers, such as when using headphones.
To enable the Parental Control feature,
press and hold the radio power button
for two seconds. To turn off ParentalControl, press and hold the radio buttonagain for two seconds.
See Section 3 of your Owner Manual.
Note: Aim the remote control at the video
screen, not the DVD player, for proper
operation.
Acadia 2007 A 10/3/06 3:07 PM Page 15

21
There are several ways to open and
close the power liftgate:
• Press and hold the (Power
Liftgate) button on the RemoteKeyless Entry transmitter until theliftgate starts moving. Press it againto reverse operation.
• Press the (Power Liftgate) button
on the center console in front of the
shift lever. Press it again to reverse
operation.
• Press the touchpad on the liftgate
handle to open. Press it again toreverse operation.
• Press the
button on thebottom of theliftgate, next tothe liftgatelatch, to close.Press it again to reverse operation.
To disable all power liftgate controls,
switch the button on the center
console to the OFF position. The liftgate
can be opened and closed manually.
See Section 2 of your Owner Manual.
Power Liftgate (if equipped)
Remote Vehicle Start
(if equipped)
This feature allows you to start the
engine from outside the vehicle by using
the RKE transmitter. The remote startcapability must be turned on using theDriver Information Center.
The vehicle’s automatic climate control
system (if equipped) will default to aheating or cooling mode based onoutside temperature, and the manualclimate control system will turn on at the
same setting as when the vehicle was
last turned off.
Starting the Vehicle
To remote start the vehicle:
1.Aim the RKE transmitter at the
vehicle. (Transmitter range is withinapproximately 195 feet of the vehicle.)
2. Press and release the (Lock)
button on the transmitter.
3. Immediately press and hold the
(Remote Start) button for about fourseconds. When the vehicle starts, theparking lamps will light and remain on
while the engine is running. The enginewill continue running for 10 minutes.
4. Repeat these steps for a 10minute
time extension. Only two consecutiveremote starts are allowed.
When you enter the vehicle after a
remote start, the key must be inserted inthe ignition and turned to the On positionbefore driving.
Canceling a Remote Start
If you wish to turn off the engine instead
of driving after a remote start, performone of the following functions:
•Press and hold the (Remote Start)
button until the parking lamps turn off.
•Press and release the Hazard
Warning Flashers button. Press it
again to turn off the flashers.
• Turn the key in the ignition switch to
the On position and then off.
See Section 2 of your Owner Manual.
Note:The Remote Vehicle Start feature
will not operate if the key is in the ignition, the hood or liftgate is open, or theCheck Engine light is illuminated on the
instrument panel cluster.
Acadia 2007 A 10/3/06 3:07 PM Page 21

23
Tire Pressure Monitor
The Tire Pressure Monitor alerts you
when a significant reduction in pressure
occurs in one or more of your vehicle’s
tires by illuminating the (Low Tire
Pressure) warning light on the instru
ment panel. The low tire pressurewarning light will remain on until youcorrect the tire pressure.
A CHECK TIRE PRESSURE message
may appear on the DIC.
Correcting the Tire Pressure
When the low tire pressure warning light
illuminates, you must fill the tire to the
proper tire inflation pressure. The Tire
and Loading Information label, located
on the center pillar below the driver’sdoor latch, shows the correct inflationpressure for the tires when they’re cold.“Cold” means your vehicle has beensitting for at least three hours or drivenno more than one mile.
You can temporarily remove the DIC
message by acknowledging it with yourDIC controls. However, at the next
vehicle startup, the DIC message will
reappear if the tire pressure has notbeen corrected.
You may notice during cooler conditions
that the low tire pressure warning lightwill appear when the vehicle is first
started and then turn off as you start todrive the vehicle. This could be an early
indicator that your tire pressures are getting low and need to be inflated to theproper pressure.
See Section 5 of your Owner Manual.
Note:The Tire Pressure Monitor can
alert you about low tire pressure, but itdoesn’t replace normal monthly tiremaintenance.
Resetting the Oil Life System
The Oil Life System calculates engine oil
life based on vehicle use and displays
CHANGE OIL SOON in the Driver
Information Center (DIC) when it’snecessary to change your engine oil and
filter. The Oil Life System should bereset to 100% only following an oilchange.
To reset the Oil Life System (without
DIC):
1. Turn on the ignition, with the engine
off.
2. Fully press and release the accelera
tor pedal slowly three times withinfive seconds.
3. Turn off the ignition.
To reset the Oil Life System (with DIC):
1. Turn on the ignition, with the engine
off.
2. Press the (Vehicle Information)
button until the DIC displays OILLIFE
REMAINING.
3. Press and hold the (Set/Reset)
button until 100% is displayed.
4. Turn off the ignition.
See Section 5 of your Owner Manual.
Acadia 2007 A 10/3/06 3:07 PM Page 23