2007 GMC ACADIA height

Getting to Know YourAcadia6
If you change your seat position, you
may have to readjust the HUD image forproper viewing.
(Page):Press and hold this button to
change the display format. Release thebutton when the desired display isshown.
If the ignition is on and you cannot see
the HUD image, check to see whether:
• Something is covering the HUD lens
• The brightness is adjusted properly
• The HUD image is adjusted to the
proper height
• The windshield and HUD lens are
clean (do not spray glass cleaner
directly on the HUD lens)
• You are wearing polarized sunglass
es, which could make the imageharder to see
• A fuse is blown (see your Owner
Manual)
See Section 3 of your Owner Manual.
(Lock):Press this button to lock all
the doors. RKE feedback (light flashand/or horn chirp) can be programmedusing the Driver Information Center(DIC).
(Unlock):Press this button to unlock
the driver’s door. Press it again withinfive seconds to unlock all remainingdoors. RKE feedback (light flash) can beprogrammed using the DIC.
(Power Liftgate)(if equipped):
Press and hold this button until the liftgate starts moving to open and close
the liftgate. The taillamps will flash and
a chime will sound when the liftgate ismoving.
(Vehicle Locator/Panic Alarm):Press and release this button to locate
your vehicle. The turn signal lamps will
flash and the horn will sound three
times.
Press and hold the button to activate the
panic alarm. The turn signal lamps willflash and the horn will sound for 30 sec
onds. Press the button again or turn theignition to On to cancel the panic alarm.
See Section 2 of your Owner Manual.Remote Keyless Entry
SAFETY & SECURITY
The Remote
Keyless Entry (RKE)transmitter allowsyou to lock andunlock your vehicleand perform otherfunctions while up toapproximately 195feet away from thevehicle. RKE functions include:
(Remote Vehicle Start)(if
equipped): This feature can be used to
start the engine from outside the vehicle.
(See Remote Vehicle Start.)
OnStar®
The OnStar system provides invehicle
safety, security and phone services,available 24 hours a day, 7 days a
week. These services are easily
accessed through the three OnStarbuttons in your vehicle.
For more information about OnStar
features, refer to the OnStar Owner’s
Guide and enclosed audio CD located
inyour glove box.
See Section 2 of your Owner Manual.
Acadia 2007 A 10/3/06 3:07 PM Page 6

7
Manual Lumbar Support Adjustment
(if equipped)

To increase the amount of lumbar
support, ratchet up repeatedly the lever
located on the inboard side of the seat
back. To decrease support, ratchet the
lever down repeatedly.

Power Seat Adjustment (if equipped)

Use the horizontal control (A) on the
outboard side of the seat cushion to
move the seat forward/rearward and, on
the driver’s seat only, up/down as well
as raise/lower the front or rear of the
seat cushion.

Power Seatback Recline Adjustment
(if equipped)

Use the vertical control (B) on the
outboard side of the seat cushion to
recline/raise the seatback.

Power Lumbar Support Adjustment
(if equipped)

Use the control pad (C) on the outboard
side of the seat cushion to increase/
decrease lumbar support and to
raise/lower the height of the support.

See Section 1 of your Owner Manual.

Child Restraints (LATCH)

Your vehicle is equipped with LATCH
anchors, and may have top tethers for
use with a LATCH compatible child
restraint. The LATCH anchors are
located in the 2ndrow outboard seating
positions. If your child restraint is not
compatible with the LATCH system, you
may still use it by installing the child
restraint with the safety belt system.
Choose a child seat that is appropriate
for the child’s age and size (weight
and height).

See Section 1 of your Owner Manual.

Seat Adjustments
Manual Seat Height Adjustment

To raise the driver’s seat, ratchetup
repeatedlythe leverlocated on the front
outboard side of the seat cushion. To
lower the seat, ratchet the lever down
repeatedly .

Manual Seatback Recline Adjustment

Lift the lever located on the lower out
board side of the seatback and move
the seatback to the desired position;
then release the lever.

COMFORT

C
B
A
Power Seat controls

Acadia 2007 A 10/3/06 3:11 PM Page 7

Getting to Know YourAcadia8
Entering or Exiting the 3rdRow Seats
The 2ndrow
Smart Slideseats allowfor easyaccess to the3rdrow seats.
To enter orexit the 3rdrow seats:
1. Make sure nothing is on the 2ndrow
seat or the floor in front of the seat.
2. Before sliding the 60/40 split bench
seat, fold the center armrest into theupright position in the seatback.
3. Rotate the
release leverlocated on theupper outboardside of theseatbackforward.
4. Push the top of
the seatback
forward. The seat cushion will fold upautomatically and the entire seat willslide forward.
To return the 2ndrow seat to the seating
position:
1. Make sure nothing is on the floor
behind the 2ndrow seat.
2.Push the top of the seatback rear
ward until the seatback and floortracks lock.
3.Push down at the rear of the seat
cushion to lock it in place.
4. Pull on the seatback to be sure it is
locked in place.
Sliding the Seats
To slide the 2ndrow seats for more leg
room in the 2nd or 3rd row:
1. Make sure nothing is on the floor in
front or behind the 2ndrow seat.
2. Pull outward
on the handlelocated onthe outboardside of theseat cushionand slide theseat forward or rearward.
3.Release the handle.
4. Pull on the seat to make sure it is
locked in place.
Folding the Seatbacks
To fold the seatbacks forward to create
a flat load floor:
1.Pull outward on the handle located on
the outboard side of the seat cushionand slide the seat rearward.
2.Fold the armrest(s) into the upright
position.
3. Pull forward on the strap located on
the outboard side of the seatback andfold down the seatback.
To return the
seatbacks
upright, pull upthe seatbackand push itrearward until itlocks in place.
See Section 1 of your Owner Manual.
2ndRow Seats
Note: The 2nd and 3rdrow head
restraints are not height adjustable.
Acadia 2007 A 10/3/06 3:07 PM Page 8