204-01 -1 9 Front Suspension 204-01 -1 9
REMOVAL AND INSTALLATION
Front Strut and Spring Assembly(l4 781 0)
, Special Tool(s)
I Lever, Wheel Knuckle
- 4m &AUTION:S~~~~~~ the brake caliper and
anchor plate to prevent load being placed
on the brake hose.
Detach the brake caliper and anchor plate
from the wheel knuckle.
Removal
1. Remove the wheel and tire. For additional
information, refer to Section
204-04 wheels
and Tires].
2. N0TE:Make a note of the position of the
brake hose, to aid installation.
Detach the brake hose from the brake hose
support bracket.
5. Remove the brake disc.
Remove the retaining clip.
Remove and discard the retaining washer (if
equipped).
I
3. N0TE:Use a 5 mm Allen key to prevent the I I
ball joint from rotating.
6m &~u~l~N:~rotect the ball joint seal using
Detach the stabilizer bar connecting link from a cloth to prevent damage. the strut and spring assembly. . - - Detach the lower arm ball joint from the
wheel knuckle.
2006.0 Fiesta 1212006 GI 83760en
procarmanuals.com
204-01 -20 Front Suspension 204-01 -20
REMOVAL AND INSTALLATION
Remove the heat shield.
7. Remove the wheel knuckle to strut and
spring assembly pinch bolt.
8. N0TE:Suppot-t the halfshaft. The inner joint
must not be bent more than
I8 degrees. The
outer joint must not be bent more than
45
degrees.
Using the special tool, detach the wheel
knuckle from the strut and spring assembly.
ACAUTION:~~~~ the aid of another
technician, support the strut and spring
assembly. Remove
the strut and spring assembly.
Installation
CAUTIONS:
A Make sure the heat shield is installed to
prevent damage to the ball joint.
The lower arm pinch bolt must be installed
from the rear of the wheel knuckle.
A Do not twist the brake hose when installing
the brake caliper to prevent damage to the
brake hose.
f- ,
A Make sure the brake hose is correctly
located in the brake hose support bracket
to prevent damage to the brake hose.
A Make sure the brake hose retaining clip is
located on the underside of the brake hose
support bracket to prevent damage to the
brake hose.
I. To install, reverse the removal procedure.
2006.0 Fiesta 1~12006 GI 83760en
procarmanuals.com
