I <:: .
31 0-02B-4 Acceleration Control - 2.OL Duratec-HE (M14) 31 0-02~-4::'
DIAGNOSIS AND TESTING
Acceleration Control
lnspection and Verification
1. Verify the customer concern.
3. If an obvious cause for an observed or reported \.
concern is found, correct the cause (if possible)
before proceeding to the next step.
2. Visually inspect for obvious signs of mechanical 4. If the cause is not visually evident, verify the
or electrical damage. symptom
and refer to Symptom Chart.
Visual lnspection Chart
I Mechanical I Electrical I
- Accelerator pedal
- Electronic throttle
body
Fuse(s)
Wiring harness(s)
Electrical
connector(s)
Accelerator pedal
Electronic throttle
body
Powertrain control
module (PCM)
Symptom Chart
Accelerator pedal does not
return freely
Symptom Chart
Symptom Possible Sources Action
Accelerator pedal is hard to
depress or has a roughlraspy
or sticky feel
Adjacent hardware, wiring
harness(s), trim(s), carpet or
mat(s) incorrectly installed.
High engine idle speed
Adjacent hardware, wiring
harness(s), trim(s), carpet or
mat(s) incorrectly installed.
Worn or damaged accelerator
pedal.
CHECK the accelerator pedal
and adjacent parts for correct
installation.
worn or damaged accelerator
pedal. CHECK the
accelerator pedal
and adjacent parts for correct
installation.
INSTALL a new accelerator
pedal.
INSTALL a new accelerator
pedal.
Electronic throttle body. REFER to WDS to diagnose
the system.
Damaged
accelerator pedal.
I PCM calibration. REFER
to WDS to diagnose
the system.
REFER to WDS to diagnose
the system.
Poor idling I Electronic throttle body.
- - - - - - - -
2006.0 Fiesta 121200s ~426591 en
REFERto WDS todiagnose
the system.
PCM, calibration.
REFER to WDS to diagnose ),
1- ' the system.
procarmanuals.com
