9SOUND SYSTEM
CONTROLS ON
STEERING WHEEL1. Volume up button
2. Volume down button
1+2 To switch the MUTE function on,
press buttons 1 and 2 at the same
time; to restore volume press one
of the two buttons
3. Radio: automatic tuning to upper
radio frequency
Hold the button pressed to change
frequency; station search will stop
when releasing the buttonCD/CD Changer/MP3 (where fit-
ted):select previous track
Hold the button pressed for fast
track playback; release the button
to return to standard playback
4. Radio: automatic tuning to lower
radio frequency
Hold the button pressed to change
frequency; station search will stop
when releasing the button
CD/CD Changer/MP3 (where fit-
ted):select previous track
Hold the button pressed for fast
track playback; release the button
to return to standard playback
5. Button for selecting audio source
(radio/CD/CD Changer) and for
confirming the selected functionfig. 2
F0P0501m
6. Turn up
Radio: select lower stored station
CD Changer: select previous CD
With MP3 (where fitted): select
previous directory
7. Turn down
Radio: select upper stored station
CD Changer: select next CD
With MP3 (where fitted): select
next directory
10
SOUND SYSTEM
FUNCTIONS AND
ADJUSTMENTSSWITCHING ON AND OFF
To switch the sound system on, turn the
ignition key to M and press the
button/knob (R).
To switch the sound system off, press
the button/knob (R).
The sound system can be worked for 30
minutes when the engine is not running.
ADJUSTING VOLUME AND
SOUND
Adjusting the volume
Turn the button/knob (R).
IMPORTANTThe sound system will
switch automatically to MUTE if a mobile
telephone “mute” output is connected to
the sound system when the telephone is
in use.Adjusting the sound
The bass/treble, balance, fader and loud-
ness settings can be adjusted. The balance
and fader functions enhance the sound
from the left/right and front/rear speak-
ers. The loudness function enhances bass
and treble when the volume is low.
To adjust the setting, press the +(F)
button several times to access the re-
quired function, bass, treble, loudness, fad-
er and balance.
The sound system will automatically de-
activate the sound setting activity if no ac-
tion is carried out or if the +(F) button
is pressed after making the setting.
IMPORTANTThe bass and treble set-
ting is source specific. This means that set-
tings can be made specifically for the RA-
DIO, CD or CD CHANGER.Adjusting bass tones
When the display shows “BASS”, press
button Nor Oto adjust the setting. Set-
tings can be made in the following range:
– “BASS -9” to decrease bass tones;
– “BASS 0” to adjust bass tones to av-
erage;
– “BASS +9” to increase bass tones.
Adjusting treble tones
When the display shows “TREB”, press
button Nor Oto adjust the setting. Set-
tings can be made in the following range:
– “TREB -9” to set the treble to the min-
imum value;
– “TREB 0” to set the treble to the mid-
dle value;
– “TREB +9” to set the treble to the
maximum value.
