2007 FIAT PANDA buttons

109
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
Scan function
(scanning MP3 CD tracks)
With this function it is possible to listen to all the
tracks contained in the CD.
Keep button 1 (SOURCE-SCAN) pressed until hear-
ing the “beep” to play the first 10 seconds of every
track on the CD. While playing the display will alter-
nately show for about 2 seconds, the CD function
chosen (CD time, name or number) and the word
“SCAN”. If the Scan function is on, the Repeat and
Mix functions are turned off.
The scanning sequence is the following:
❒from the track played up to the last of the tracks in
the directory;
❒changing directory and scanning tracks from start
to end (and so on for every directory in the CD
until the function is interrupted).The Scan function is interrupted in the following
cases:
❒pressing button 1 (SOURCE-SCAN) again to con-
tinue listening to the track being played;
❒pressing one of the buttons 6 (
N) or ( O) (in MP3
CD mode will select the previous/next directory);
❒pressing a preset button (from 1 to 6);
❒turning the Mute function on;
❒changing the sound source;
❒pressing button 1 (SOURCE-SCAN), 10 (MENU-
PRESET SCAN) or 18 (AUDIO-LOUDNESS);
❒if the TA function is on and the station selected is
broadcasting a traffic bulletin.
The Scan function will stay active until it is stopped by
the user.
099-120 ING 21-06-2007 15:51 Pagina 109

111
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
MP3 Info function (directory data info)
Press briefly button 7 (6-MP3
|) to display the cur-
rent directory: the display will show twice the name
of the currently selected directory for about 2 sec-
onds. Then the previously selected CD mode will
be displayed again.
If button 7 (6-MP3
|) is pressed again during direc-
tory name displaying, the name of the MP3 track
being played will be displayed twice for about 5 sec-
onds. Then the previously selected CD mode will
be displayed again.
MENU
Functions of button 11 (MENU-PRESET
SCAN)
To activate the menu function, briefly press button 11
(MENU-PRESET SCAN). The display shows the word
“MENU”.
To scroll the menu functions use buttons 6 (
N) or
(
O). To turn on/off the function selected, use buttons
5 (
÷) or (˜).
The display will show the current status of the func-
tion selected.
The functions controlled by the menu are the follow-
ing:
❒USER EQ SETTINGS (equalizer setting, only if the
equalizer is on);
❒PRESET/USER/CLASSIC/ROCK/JAZZ (turning
on/off and choosing predefined equalizer adjust-
ments);
❒REGIONAL MODE (regional programmes);
❒CD DISPLAY (CD data display);
❒MP3 DISPLAY (MP3 CD data display);
❒CDC DISPLAY (CD Changer data display, if
installed);
099-120 ING 21-06-2007 15:51 Pagina 111

112
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
To turn the equalizer on, select one of the following
with button 6 (
N) or (O):
❒“USER” (adjustment of the 7 equalizer bands that
can be changed by the user);
❒“CLASSIC” (predefined equalizer adjustment for
best playing of classic music);
❒“ROCK” (predefined equalizer adjustment for best
playing of rock and pop);
❒“JAZZ” (predefined equalizer adjustment for best
playing of jazz).
After selecting the last adjustment set in the Menu
using buttons 6 (
N) or (O) use button 5 (÷) or
(
˜) to change it.
When one of the equalizer settings is on, the display
shows “EQ”.
USER EQ SETTINGS function
(equalizer settings only if USER is selected)
To set a personal equalizer adjustment, use button 6
(
N) or (O) to select “USER EQ SETTINGS”.
To change the equalizer settings, use button 5 (
÷)
or (
˜). ❒SENSITIVITY (tuning sensitivity);
❒SVC SETTING (automatic volume control in rela-
tion to speed);
❒CD NAMING FUNCTION (allocation of CD
names, only with CD or CD Changer selected);
❒PHONE SETTING (Telephone volume, if installed);
❒HICUT FUNCTION (Treble reduction);
❒IGNITION TIMER (System power off mode);
To exit the menu function, press button 11 (MENU-
PRESET SCAN) again.
PRESET/USER/CLASSIC/ROCK/JAZZ function
(equalizer on/off)
The integrated equalizer can be turned on or off.
With the equalizer off, it is possible to change the
sound settings only adjusting the bass (“BASS”) and
treble tones (“TREBLE”), while activating the function
makes it possible to adjust the sound curves.
To turn the equalizer off, select “PRESET” with button
6 (
N) or (O).
099-120 ING 21-06-2007 15:51 Pagina 112

113
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
The display shows a graph with 7 bars, where each bar
represents a frequency for the left or right channel.
Choose the bar to be adjusted using button 5 (
÷)
or (
˜); the bar chosen starts to flash and it is
possible to adjust it using button 6 (
N) or (O).
To store the new settings, press button 11 (MENU-
PRESET SCAN) again. The display still shows “USER
EQ SETTINGS”.
REGIONAL MODE function
(regional broadcast reception)
Certain national broadcasters, at determinate times of
the day, transmit regional programmes which differ
from region to region. This function makes it possible
to tune in only on local stations (regional). However if
a regional programme is heard and you wish to stay
tuned to it, the function must be activated.
To turn the function on/off use button 5 (
÷) or
(
˜).
The display will show the current status of the func-
tion:
❒“REGIONAL MODE: ON”: function on;
❒“REGIONAL MODE: OFF”: function off.If the function is off and a regional programme is tuned
that works in a determinate area and the car enters a
different area, the regional station of the new area is
received.
IMPORTANT When the function is off (“REGIONAL
MODE-OFF”) and the AF function is on (alternative
frequencies) the radio automatically tunes to the
frequency of the station selected with the strongest
signal.
CD DISPLAY function
(CD data display)
With this function it is possible to choose the infor-
mation shown on the display, when listening to a
Compact Disc.
After choosing “CD” in the menu using buttons 6 (
N)
or (
O) the display shows “CD DISPLAY”. To change
the setting use buttons 5 (
÷) or (˜).
The display shows the setting among the two possible:
❒“TIME” (time elapsed from start of track);
❒“NAME” (CD name).
099-120 ING 21-06-2007 15:51 Pagina 113

114
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
MP3 DISPLAY function (MP3 CD data display)
With this function it is possible to choose the
information shown on the display, when listening to a
MP3 CD.
This function can be chosen only if a MP3 CD is
inserted. In this case the display will show
“MP3 DISPLAY”. To change the function use buttons
5 (
÷) or (˜).
The display shows the setting among the four possible:
❒“DIR” (directory name);
❒“TRACK” (track name);
❒“TIME” (time elapsed from start of track);
❒“NAME” (CD name).
CDC DISPLAY function
(CD Changer data display) (if installed)
This function can be chosen only if a CD Changer is
connected. In this case the display will show “CDC
DISPLAY”.
To change the function use buttons 5 (
÷) or
(
˜).
The display shows the setting among the three possible:
❒“TIME” (time elapsed from start of track);
❒“CD NR” (CD number);
❒“NAME” (CD name).SENSITIVITY function
(tuner sensitivity adjustment)
With this function it is possible to change the sensitiv-
ity of automatic station searching. When low sensitivi-
ty is set “SENSITIVITY LOCAL” only stations with
excellent reception are sought; when high sensitivity is
set “SENSITIVITY DISTANCE” all stations are sought.
Therefore, if the car is in an area with a considerable
number of stations and you want to choose only
those with a strong signal, set to low sensitivity “SEN-
SITIVITY LOCAL”.
To set the sensitivity, use button 5 (
÷) or (˜).
The display will show the current status of the func-
tion:
❒“SENSITIVITY: LOCAL”: low sensitivity;
❒“SENSITIVITY: DISTANCE”: high sensitivity.
099-120 ING 21-06-2007 15:51 Pagina 114

115
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
SVC SETTING function
(volume changing with speed)
The SVC function makes it possible to automatically
adapt the volume level to the speed of the car,
increasing it as the speed increases to maintain the
ratio with the noise level in the passenger compart-
ment.
To turn the function on/off use button 5 (
÷) or
(
˜). The display will show the current status of the
function:
❒“SVC SETTING: ON”: function on;
❒“SVC SETTING: OFF”: function off.
CD NAMING function
(allocating a name to a CD)
Use the CD NAME function to give a name (max.
name length = 8 characters) to max. 30 CDs.
This function can be selected only if in Compact Disc
or CD Changer mode.
To turn this function on, use button 5 (
÷) or
(
˜): the display shows “CD NAMING FUNC-
TION”. If the CD already has a name, this will be
shown on the display, if not, eight dashes will be
shown. If storage is no longer available for a new
name, the display will show the first name stored.To change the name or give a name to the new CD
press button 5 (
÷) or (˜). Press the buttons
again to choose the position of the character to be
changed. Press buttons 6 (
N) or (O) to choose or
change the character.
To store the name, press button 11 (MENU-PRESET
SCAN) again. The display will show “CD NAME”.
To clear a name, turn the function on and press
button 15 (2-CLR) for about 5 seconds. The system
beeps and the display shows “ONE NAME DELETED”
for about 2 seconds. At this point the procedure can
be started to give a new name.
To clear all the names, turn the function on and keep
button 15 (2-CLR) pressed for over 8 seconds. The
set gives two beeps and the display shows “ALL NAME
DELETED” for about 2 seconds. At this point it is
possible to start the name allocation procedure.
099-120 ING 21-06-2007 15:51 Pagina 115