2007 FIAT PANDA buttons

83
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
❒SVC SETTING (automatic volume control in
relation to speed);
❒CD NAMING FUNCTION (for allocating names to
CDs, only with CD inserted and being played);
❒PHONE SETTING (Telephone volume, if installed);
❒HICUT FUNCTION (Treble reduction);
❒IGNITION TIMER (System power off mode);
To exit the menu function, press button 11 (MENU-
PRESET SCAN) again.
PRESET/USER/CLASSIC/ROCK/JAZZ function
(equalizer on/off)
The integrated equalizer can be turned on or off. With
the equalizer off, it is possible to change the sound
settings only adjusting the bass (“BASS”) and treble
tones (“TREBLE”), while activating the function makes
it possible to adjust the sound curves.
To turn the equalizer off, select “PRESET” with button
6 (
N) or (O).
To turn the equalizer on, select one of the following
with button 6 (
N) or (O):
❒“USER” (adjustment of the 7 equalizer bands that
can be changed by the user);
❒“CLASSIC” (predefined equalizer adjustment for best
playing of classic music);❒“ROCK” (predefined equalizer adjustment for best
playing of rock and pop);
❒“JAZZ” (predefined equalizer adjustment for best
playing of jazz).
After selecting the last adjustment set in the Menu
using buttons 6 (
N) or (O) use button 5 (÷) or
(
˜) to change it.
When one of the equalizer settings is on, the display
shows “EQ”.
USER EQ SETTINGS function
(equalizer settings only if USER is selected)
To set a personal equalizer adjustment, use button 6
(
N) or (O) to select “USER EQ SETTINGS”.
To change the equalizer settings, use button 5 (
÷)
or (
˜).
The display shows a graph with 7 bars, where each bar
represents a frequency for the left or right channel.
Choose the bar to be adjusted using button 5 (
÷)
or (
˜); the bar chosen starts to flash and it is
possible to adjust it using button 6 (
N) or (O).
To store the new settings, press button 11 (MENU-
PRESET SCAN) again. The display still shows “USER
EQ SETTINGS”.
051-098 ING 21-06-2007 15:49 Pagina 83

84
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
REGIONAL MODE function
(regional broadcast reception)
Certain national broadcasters, at determinate times of
the day, transmit regional programmes which differ
from region to region. This function makes it possible
to tune in only on local stations (regional). However if
a regional programme is heard and you wish to stay
tuned to it, the function must be activated.
To turn the function on/off use button 5 (
÷) or
(
˜).
The display will show the current status of the
function:
❒“REGIONAL MODE: ON”: function on;
❒“REGIONAL MODE: OFF”: function off.
If the function is off and a regional programme is tuned
that works in a determinate area and the car enters a
different area, the regional station of the new area is
received.
IMPORTANT When the function is off (“REGIONAL
MODE-OFF”) and the AF function is on (alternative
frequencies) the radio automatically tunes to the
frequency of the station selected with the strongest
signal.CD DISPLAY function
(Compact Disc data display)
With this function it is possible to choose the
information shown on the display, when listening to a
Compact Disc.
After choosing “CD” in the menu using buttons 6 (
N)
or (
O), the display shows “CD DISPLAY”. To change
the setting use buttons 5 (
÷) or (˜).
The display shows the setting among the two possible:
❒“TIME” (time elapsed from start of track);
❒“NAME” (CD name).
CDC DISPLAY function
(CD Changer data display)
(if installed)
This function can be chosen only if a CD Changer is
connected. In this case the display will show “CDC
DISPLAY”.
To change the function use buttons 5 (
÷) or (˜).
The display shows the setting among the three
possible:
❒“TIME” (time elapsed from start of track);
❒“CD NR” (CD number);
❒“NAME” (CD name).
051-098 ING 21-06-2007 15:49 Pagina 84

86
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
To change the name or give a name to the new CD
press button 5 (
÷) or (˜). Press the buttons
again to choose the position of the character to be
changed. Press buttons 6 (
N) or (O) to choose or
change the character.
To store the name, press button 11 (MENU-PRESET
SCAN) again. The display will show “CD NAMING”.
To clear a name, turn the function on and press
button 15 (2-CLR) for about 5 seconds. The system
beeps and the display shows “ONE NAME DELETED”
for about 2 seconds. At this point the procedure can
be started to give a new name.
To clear all the names, turn the function on and keep
button 15
(2-CLR) pressed for over 8 seconds. The set gives two
beeps and the display shows “ALL NAMES DELETED”
for about 2 seconds. At this point it is possible to start
the name allocation procedure.PHONE SETTING function
(telephone volume adjustment)
With this function it is possible to adjust (setting from
1 to 66) or cut off (OFF setting) the telephone sound.
To turn the function on/off use button 5 (
÷) or
(
˜).
To adjust, turn the button/knob 18 (VOLUME
ON/OFF).
The display will show the current status of the
function:
❒“PHONE FUNCTION”: function on;
❒“PHONE VOLUME: 23”: function on with volume
setting 23;
❒“OFF”: function off.
HICUT function (treble reduction)
Using this function it is possible to reduce the treble
tones, in accordance with the signal transmitted. To
turn the function on/off use button 5 (
÷) or (˜).
The display will show the current status of the
function:
❒“HICUT FUNCTION: ON”: function on;
❒“HICUT FUNCTION: OFF”: function off.
051-098 ING 21-06-2007 15:49 Pagina 86

91
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
TPM function (CD playing sequence storage)
With the TPM function (Track Program Memory) it is
possible to store the sequence for playing tracks of a
CD, to be able to play them later in the sequence set.
To turn the function on briefly press button 16 (1-
TPM), while listening to a CD. When the function is
on, the display shows “TPM ON”. After playing the
track, the display will show again the word “TPM ON”
for about 2 seconds.
The TPM function cannot be activated if no track
sequence has been set. Pressing button 16 (1-TPM) the
display will show “NO TPM AVAILABLE”.
To store tracks, select the track required, then keep
button 16
(1-TPM) pressed until hearing the beep; the display will
show “TRACK IS STORED”. Repeat this procedure
for all the other tracks to be stored.
IMPORTANT It is possible to store max. 40 tracks per
CD.CLR function
(clearing CD track storage)
With the CLR (Clear) function it is possible:
❒to clear only one or all CD tracks stored with the
TPM function.
❒to clear the tracks stored with the TPM function
from all the CDs contained in the CD Changer.
To clear one track, select it with buttons 5 (
÷) or
(
˜) when the TPM function is on, then keep button
15 (2-CLR) pressed for about 3 seconds. The TPM
function is turned off, a beep is heard and the display
shows “ONE TRACK DELETED”.
To clear all the tracks stored of a CD, insert the
required CD, turn on the TPM function then press
button 15 (2-CLR) for about 6 seconds. The TPM
function is turned off, a double beep is heard after
about 2 and 4 seconds and the display shows
“ALL TRACKS DELETED”.
To clear all the tracks of all the CDs contained in the
CD changer, press button 15
(2-CLR) for over 8 seconds. Three beeps are heard
after about 2, 4 and 8 seconds and the display shows
“COMPLETE TPM CLEARED”.
051-098 ING 21-06-2007 15:49 Pagina 91

94
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
The scanning sequence is the following:
❒from the track played up to the last of the tracks on
the CD;
❒next CD is selected and scanning from first to last
CD track is performed (valid also for all the other
CDs in the CD Changer).
❒after scanning the last CD in the CD Changer, the
first one will be played again.
The Scan function is interrupted in the following cases:
❒pressing button 1 (SOURCE-SCAN) again to
continue listening to the track being played;
❒pressing button 6 (
N) or (O) (in CD Changer
mode, pressing these buttons together will select
another CD);
❒pressing a preset button (from 1 to 5);
❒turning the Mute function on;
❒changing the sound source;
❒pressing button 11 (MENU-PRESET SCAN) or 8
(AUDIO-LOUDNESS);
❒if the TA function is on and the station selected is
broadcasting a traffic bulletin.
The Scan function will stay active until it is stopped by
the user. Pause function
To pause the CD Changer, press briefly button 13 (3-
II). The display will show “PAUSE”.
To resume playing the track, press button 13 (3-II)
again.
The pause function is automatically cancelled changing
the sound source.
Scan function
(scanning CD tracks)
With this function it is possible to play the beginning of
all the tracks of the CDs contained in the CD
Changer.
Keep button 1 (SOURCE-SCAN), pressed until
hearing the “beep” to play the first 10 seconds of
every track on the CD. While playing the display will
alternately show for about 2 seconds, the CD function
chosen (CD time, name or number) and the word
“SCAN”. If the Scan function is on, the Repeat and Mix
functions are turned off.
051-098 ING 21-06-2007 15:49 Pagina 94

96
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
TPM function (CD playing sequence storage)
With the TPM function (Track Program Memory) it is
possible to store the sequence for playing tracks of a
CD, to be able to play them later in the sequence set.
To turn the function on briefly press button 16 (1-
TPM), while listening to a CD. When the function is
on, the display shows “TPM ON”. After playing the
track, the display will show again the word “TPM ON”
for about 2 seconds.
The TPM function cannot be activated if no track
sequence has been set. Pressing button 16 (1-TPM) the
display will show “NO TPM AVAILABLE”.
To store tracks, select the track required, then keep
button
16 (1-TPM) pressed until hearing the beep; the display
will show “TRACK IS STORED”. Repeat this
procedure for all the other tracks to be stored.
IMPORTANT It is possible to store max. 40 tracks per
CD.CLR function
(clearing CD track storage)
With the CLR (Clear) function it is possible:
❒to clear only one or all CD tracks stored with the
TPM function;
❒to clear the tracks stored with the TPM function
from all the CDs contained in the CD Changer.
To clear one track, select it with buttons 5 (
÷) or
(
˜) when the TPM function is on, then keep button
15 (2-CLR) pressed for about 3 seconds. The TPM
function is turned off, a beep is heard and the display
shows “ONE TRACK DELETED”.
To clear all the tracks stored of a CD, insert the
required CD, turn on the TPM function then press
button 15 (2-CLR) for about 6 seconds. The TPM
function is turned off, a double beep is heard after
about 2 and 4 seconds and the display shows
“ALL TRACKS DELETED”.
To clear all the tracks of all the CDs contained in the
CD changer, press button 15 (2-CLR) for over 8
seconds. Three beeps are heard after about 2, 4 and 8
seconds and the display shows “COMPLETE TPM
CLEARED”.
051-098 ING 21-06-2007 15:49 Pagina 96

100
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
1
2
3
4
5
6
7
8
9
SOURCE-SCAN
Display
Slot for CD
˚
÷
˜
N
O
6-MP3 |
AUDIO-LOUDNESS
5-MIXSelect audio source/Scan function
Eject CD
Manual station tuning
Automatic station tuning
Preset station 6
MP3 info function
Audio settings/Loudness
Preset station 5/MIX functionSelect CD, CD Changer
(if installed) or Radio
Eject CD
Manual station tuning
TP: seek -
PTY: seek -
AF: seek -
Manual station tuning
TP: seek +
PTY: seek +
AF: seek +
Automatic station tuning
TP: seek +
PTY: seek +
AF: seek +
Automatic station tuning
TP: seek -
PTY: seek -
AF: seek -
FM/AM: call preset
station 6
Bass (B)
Treble (T)
Fader (F)
Balance (B)
FM/AM: call preset
station 5FM/AM station scan
Fast manual station tuning
TP: seek -
PTY: seek -
AF: seek -
Fast manual station tuning
TP: seek +
PTY: seek +
AF: seek +
Fast automatic station tuning
TP: seek +
PTY: seek +
AF: seek +
Fast automatic station tuning
TP: seek -
PTY: seek -
AF: seek -
FM/AM: store preset
station 6
Loudness on/off
FM/AM: store preset
station 5
Button Buttons and front panel
Letters or symbol FunctionRADIO mode
Short-push function (less than 2 sec.) Long-push function (over 2 sec.)
099-120 ING 21-06-2007 15:51 Pagina 100

102
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
10
11
12
13
14
15
16
17
18
4-RPT
MENU-PRESET SCAN
BAND-AUTOSTORE
3-II
AF-TA
2-CLR
1-TPM
PTY
ON/OFF VOLUMEPreset station
4/REPEAT function
Menu function/Scan function
Frequency band selection
Preset station 3/
Playing pause
Alternative frequency (AF) /Traffic infor-
mation (TA)
Preset station 2/CLR function (CD track
storage clearing)
Preset station 1/TPM function (CD
track sequence storing)
Programme Type
Radio on/off/Volume adjustmentFM/AM: call preset
station 4
Menu on/off
FM1, FM2, FMT, MW, LW
FM/AM: call preset
station 3
TA ON/OFF
FM/AM: call preset
station 2
FM/AM: call preset
station 1
PTY ON/OFF
With radio on: Audio Mute on/off
With radio off: radio on
Volume adjustment:
turn leftwards: to decrease
turn rightwards: to increaseFM/AM: store preset
station 4
Scan preset stations
Store automatically in FMT station range
M/AM: store preset
station 3
AF ON/OFF
FM/AM: store preset
station 2
FM/AM: store preset
station 1
PTY: displays selected programme type
With radio on: radio off
With radio off: radio on
Button Buttons and front panel
Letters or symbol FunctionRADIO mode
Short-push function (less than 2 sec.) Long-push function (over 2 sec.)
099-120 ING 21-06-2007 15:51 Pagina 102