2007 FIAT PANDA change time

REG function
(regional broadcast reception)
Certain national broadcasters, at determinate times of
the day, transmit regional programmes which differ
from region to region. This function makes it possible
to tune in only on local stations (regional). However if
a regional programme is heard and you wish to stay
tuned to it, the function must be activated.
To turn the function on/off, use button 9 (
˜) or 12
(
÷).
The display will show the current status of the
function:
❒“REG ON”: function on;
❒“REG OFF”: function off.
If the function is off and a regional programme is tuned
that works in a determinate area and the car enters a
different area, the regional station of the new area is
received.
IMPORTANT When the function is off (“REG-OFF”)
and the AF function is on (alternative frequencies) the
radio automatically tunes to the frequency of the
station selected with the strongest signal.CDC function
(CD Changer data display)
(if installed)
This function can be chosen only if a CD Changer is
connected.
In this case the display will show “CDC DISP”.
To change the function use buttons 9 (
˜) or 12
(
÷).
The display shows the setting among the two possible:
❒“TIME” (time elapsed from start of track);
❒“CD NR” (CD number).
SENS DX/LO function (tuner sensitivity
adjustment)
With this function it is possible to change the
sensitivity of automatic station searching. When low
sensitivity “SENS LO” is set only stations with
excellent reception are sought; when high sensitivity
“SENS-DX” is set all stations are sought. Therefore, if
the car is in an area with a considerable number of
stations and you want to choose only those with a
strong signal, set to low sensitivity “SENS LO”.
39
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
TAPES PLAYER
001-050 ING 21-06-2007 15:48 Pagina 39

IGN TIME function (system power off)
(where provided)
This function enables to switch the sound system off
according to two different modes. To turn the
function on/off use button 9 (
˜) or 12 (÷).
The display will show the selected mode:
❒“00 MIN”: deactivation dependent on ignition key;
the sound system will turn off automatically as soon
as the ignition key is turned to STOP;
❒“20 MIN”: deactivation independent of ignition key;
the sound system will stay on for max. 20 minutes
after turning the ignition key to STOP.
IMPORTANT: Should the sound system turn off
automatically after turning the ignition key to STOP
(for both immediate or 20-minute delayed
deactivation), it will turn on automatically when
turning the ignition key to MAR. When the sound
system is turned off using the relevant button 21
(ON/OFF), it will stay off even when turning the key
to MAR.TAPES PLAYER (TAPE)
Activating the tape player
To turn the tape player on, even when the set is off,
insert the cassette in the slot (4) with the tape
rightwards.
If the cassette is already in, press button 6
(SRC-SC) to select the tape function. Playing will start
automatically.
Playing a cassette
After turning on the tape player, the tape begins playing
automatically and the display shows either “SIDE A” or
“SIDE B” depending on which side is playing. When the
cassette is inserted, the player starts playing side A of
the tape.
If the cassette is inserted, the display shows the
wording “CC-IN”, which remains on the display eve
when different operating modes are chosen (Radio or
CD Changer). The symbol goes off after ejection of
the tape.
41
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
TAPES PLAYER
001-050 ING 21-06-2007 15:48 Pagina 41

46
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
Display information
When the CD Changer is working, the display shows
the following information which means:
❒“T05”: shows the number of the track on the CD;
❒“03:42”: shows the time elapsed since the start of
the track (if the corresponding Menu function is on);
❒“CD 04”: the number of the CD in the loader.
Choosing the CD
Press button 8 (
N) to select the next CD and button
10 (
O) to select the previous CD. If in the menu the
CD time display function was selected, this will be
replaced for about 2 seconds by the CD number.
If the loader does not contain a disc in the position
selected, the display briefly shows the wording “NO
CD”, and the next CD is played automatically.Select track (forward/backward)
Briefly press button 9 (
˜) to play the next track of
the CD chosen and button 12 (
÷) to play the
previous one. Tracks are played in sequence: after the
last track, the first one will be played and vice versa.
To select tracks continuously, keep the button
pressed.
If playing the track started more than 3 seconds ago,
pressing button 12 (
÷) the track is played again
from the start.
In this case if wanting to play the previous track, press
the button twice consecutively.
001-050 ING 21-06-2007 15:48 Pagina 46

Fast forward/backward
Keep button 9 (
˜) pressed to move the track
selected forward at high speed and keep button 12
(
÷) pressed to move it quickly backward. Fast
forward/backward is stopped once the button is
released.
If the CD number or CD name display function was
selected in the menu, this will be replaced for about 2
seconds by the CD time display function.Pause function
To pause the CD Changer, press briefly button 16 (3-
II). The display will show “PAUSE”.
To resume playing the track, press button 16 (3-II)
again.
The pause function is automatically cancelled changing
the sound source.
47
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
TAPES PLAYER
001-050 ING 21-06-2007 15:48 Pagina 47

48
RADIO WITH
COMPACT DISC PLAYER
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
Scan function
(scanning CD tracks)
With this function it is possible to play the beginning of
all the tracks of the CDs contained in the CD
Changer.
Keep button 6 (SRC-SC) pressed until hearing the
“beep” to play the first 10 seconds of every track on
the CD. While playing the display will alternately show
for about 2 seconds, the CD function chosen (CD
time, name or number) and the word “SCAN”. If the
Scan function is on, the Repeat and Mix functions are
turned off.
The scanning sequence is the following:
❒from the track played up to the last of the tracks on
the CD;❒next CD is selected and scanning from first to last
CD track is performed (valid also for all the other
CDs in the CD Changer).
❒after scanning the last CD in the CD Changer, the
first one will be played again.
The Scan function is interrupted in the following cases:
❒pressing 6 (SRC-SC) again to continue listening to
the track being played;
❒pressing button 8 (
N) or 10 ( O), will select
previous /next CD;
❒pressing a preset button (from 1 to 5);
❒turning the Mute function on
❒changing the sound source;
❒pressing button 11 (MENU-PS) or 19
(AUD-LD);
❒if the TA function is on and the station selected is
broadcasting a traffic bulletin.
The Scan function will stay active until it is stopped by
the user.
001-050 ING 21-06-2007 15:48 Pagina 48

56
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
GENERAL
The set possesses the following functions:
RADIO SECTION
❒PLL tuning with FM/AM/MW/LW frequency bands;
❒RDS (Radio Data System) with TA (traffic
information) - PTY (Program Type) - EON
(Enhanced Other Network) - REG (Regional
programmes);
❒AF: alternative frequency search selection in RDS
mode;
❒emergency alarm presetting;
❒automatic/manual station tuning;
❒manual storage of 36 stations: 18 in the FM band (6
in FM1, 6 in FM2, 6 in FMT), 6 in the MW band and
6 in the LW band and 6 PTY (only in FM);❒automatic storage (AUTOSTORE function) of 6
stations in FM band;
❒DX function (Distant: maximum sensitivity in
searching radio stations) and LO (Local) manual;
❒Scan function (scanning stored stations);
❒SVC function: automatic volume adjustment with
car speed;
❒automatic Stereo/Mono switching.
On multimedia CDs in addition to sound tracks also data tracks are recorded.
Playing one of these CDs may cause rustling and such a volume as to compromise road safety, as
well as causing damage to the final stages and speakers.
For installation and connection of the CD Changer apply only to Fiat Dealership.
051-098 ING 21-06-2007 15:49 Pagina 56

57
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
COMPACT DISC SECTION
❒Disc select (disc no.);
❒Track select (forward/backward);
❒Fast forward/backward;
❒Mix function (random playing of tracks);
❒Repeat function (repetition of last track);
❒Scan function (scanning the tracks on the Compact
Disc);
❒TPM function (CD playing sequence storage);
❒CLR function (clearing CD track storage ).
AUDIO SECTION
❒Mute/Pause function;
❒Loudness function;
❒7 band graphic equalizer;
❒Separate bass/treble adjustment;
❒Right/left channel balancing.ANTITHEFT PROTECTION
The radio is fitted with an antitheft protection system
based on the exchange of information between the
radio and the electronic control unit (Body Computer)
installed on the car.
This system warrants the highest level of security and
prevents entry of the secret code every time the radio
supply is disconnected.
If the result of the check is positive, the radio will start
working whereas, if the comparison codes are not the
same or if the electronic control unit (Body
Computer) is replaced, the device will inform the user
of the need to enter the secret code according to the
procedure described in the following paragraph.
051-098 ING 21-06-2007 15:49 Pagina 57

75
RADIO WITH
COMPACT DISC AND MP3 CD PLAYER
RADIO WITH
TAPES PLAYER
RADIO WITH
COMPACT DISC PLAYER
The behaviour of the set during AutoSTore is as
follows:
❒at the beginning of the AutoSTore function all the
other functions are disabled;
❒pressing one of the radio function buttons, e.g.: 17
(PTY), 6 (N), 5 (
÷), 6 (O), 5 (˜), (7), (9), (10),
(13), (15), (16) the automatic storage process is
interrupted, the last station heard before
AutoSTore was turned on is tuned and the function
associated with the button pressed is run;
❒pressing button 14 (AF-TA) during AutoSTore will
interrupt it, the TA function (traffic information) will
be turned on/off and a new automatic storage
process will be started;
❒changing the listening source (Radio, Compact Disc,
CD Changer) during automatic storage will not
interrupt the AutoSTore function.
Activating the AutoSTore function in MW or LW
bands will automatically select the FMT band where
the function is then run.
IMPORTANT Sometimes the AutoSTore function is
unable to find 6 stations with a strong signal. In this
case the previous stations will be stored on the free
preset buttons.Listening to stored stations
Proceed as follows:
❒select the required frequency band (FM, MW, LW);
❒briefly press one of the six station storage buttons.
The display will show the number that corresponds to
the button.
In bands FM1, FM2 and FMT, if reception is poor and
the AF alternative frequency search function is active,
the station with the strongest signal that is
broadcasting the same programme will be sought
automatically.
AF function (alternative frequency search)
Within the RDS system the radio can work in two
different modes:
❒“AF ON”: alternative frequency search on (the
display shows “AF”);
❒“AF OFF”: alternative frequency search off.
051-098 ING 21-06-2007 15:49 Pagina 75