ANNUAL INSPECTION
SCHEDULE
For cars with an annual mileage of below 20,000 km
(for example about 15,000 km) the following yearly
inspection programme is provided:
❒check tyre conditions/wear and adjust pressure if
required (including the spare wheel);
❒check lighting system operation (headlights,
direction indicators, hazard lights, boot lights,
passenger compartment lights, warning lights, etc.);
❒check windscreen/washer
(nozzles/and blade position regulation)
❒check front disk brake pad conditions and wear;
❒sight inspect the conditions of: engine, gearbox,
transmission, pipes and hoses (exhaust - fuel -
brakes), rubber parts (boots, sleeves, bushes, etc;
❒check for bonnet and boot lock cleanness, lever
cleanness and lubrication;
❒check battery charge;
❒visual check on various drive belt conditions;
❒top up fluid levels (engine coolant, brakes,
windscreen washer, battery, etc.);
❒change engine oil;
❒change engine oil filter;
❒replace pollen filter (where provided).
ADDITIONAL CHECKS
Every 1,000 km or before long journeys, check and top
up if required:
❒engine coolant fluid level;
❒brake fluid level;
❒windscreen washer fluid level;
❒tyre pressure and conditions.
Every 3,000 km check and top up if required: engine
oil level.
You are recommended to use FL Selenia products,
designed and produced specifically for Fiat cars (see
table “Capacities” in section “Technical
specifications”).
262
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
CAR
MAINTENANCE
286
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
DASHBOARD
AND CONTROLS
TECHNICAL
SPECIFICATIONS
T T
E E
C C
H H
N N
I I
C C
A A
L L
S S
P P
E E
C C
I I
F F
I I
C C
A A
T T
I I
O O
N N
S S
IDENTIFICATION DATA ................................................. 287
ENGINE CODES - BODYWORK VERSIONS .............. 289
ENGINE ................................................................................. 290
FUEL FEED/IGNITION ....................................................... 292
TRANSMISSION .................................................................. 292
BRAKES ................................................................................... 293
SUSPENSIONS ....................................................................... 293
STEERING............................................................................... 293
WHEELS .................................................................................. 294
DIMENSIONS ........................................................................ 297
PERFORMANCE ................................................................... 298
WEIGHTS ............................................................................... 299
CAPACITIES........................................................................... 300
FLUIDS AND LUBRICANTS ............................................. 301
FUEL CONSUMPTION ....................................................... 303
CO
2EMISSIONS .................................................................. 304
302
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
DASHBOARD
AND CONTROLS
TECHNICAL
SPECIFICATIONS
Use
Lubricants and greases for
transmission
Brake liquid
Protective agent
for radiator
Additive
for diesel fuel
Windscreen/
rear window
(●) IMPORTANT Do not add or mix with fluids with specifications other than the specified ones.Fluid and lubricant specifications
for correct car operation
Fully synthetic oil, grade SAE 75W-85 that passes API GL-4
PLUS, FIAT 9.55550 MIL-L- 2105 D LEV. Specifications
Specific transmission fluid with "ATF DEXTRON III"
type additives.
Lithium soap base grease. NLGI 0 consistency
Organic molibdenum disulphide, lithium soap based grease.
NLGI 2 consistency
Synthetic fluid FMVSS no. 116 DOT 4, ISO 4925,
SAE J1704, CUNA NC 956-01
Protective with antifreeze action (red colour) based on
inhibited monoethylen glycol, with O.A.T. formulation, that
passes CUNA NC 956-16, ASTM D 3306 specifications.
Additive for diesel fuels with protective action for
Multijet engines
Mixture of alcohol and surfactants CUNA NC 956-IIOriginal fluids
and lubrificants
TUTELA CAR
TECHNYX
TUTELA CAR
CS SPEED
TUTELA
MRM ZERO
TUTELA STAR 500
TUTELA TOP 4
PARAFLU UP (
●)
DIESEL MIX
TUTELA
PROFESSIONAL
SC 35Applications
Mechanical gearbox and
differential
Selespeed transmission
electrically-operated
electrohydraulic
actuator
CV joints on
differential side
CV joints on wheel side
Brake and clutch
hydraulic controls
Cooling circuits
Proportion: 50% down
to -35° C Not to be
mixed with products
having different formulas.
To be mixed with
the fuel oil
(25 cc per 10 litres)
To be used diluted or
undiluted
308
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
DASHBOARD
AND CONTROLS
INDEX
Sunroof......................................... 123
Sun visors ................................... 122
Suspensions ................................. 293
Symbols ........................................ 5
Technical specifications........... 286
Third brake light
– bulb replacement ................ 245
Tools ........................................... 242
Towing the car ........................... 255
Towing trailers ........................... 185
Transmission ............................... 292
Transporting children
safely ........................................... 159
Tyres
– snow tyres ............................. 295
– standard ................................. 295
– correct tyre reading ............ 294
Warning lights and messages 191
Weights ........................................ 299
Wheel
– spare wheel ........................... 294
– changing ................................ 230
Wheel geometry ....................... 294
Windows (cleaning) .................. 284Windscreen washer
– control ................................. 104
– fluid level ................................ 270
Windscreen wiper
– blades .................................... 279
– control .................................. 104
– nozzles .................................. 281
– smart washing ...................... 105
