2007 FIAT GRANDE PUNTO tow

42
Blue&Me™ Navwill display a list of
available points of interest categories.
Choose the required category from those
stored in the map software on your USB
device using the “
N“ or “O“ device and
press SRC/OKor
ß/MAINto confirm.
Now Blue&Me™ Navwill prompt you
to choose between LOCAL POINTS
of interest or ELSEWHERE.
❒If you select LOCAL POINTSof in-
terest by pressing SRC/OKor
ß/MAIN, Blue&Me™ Navwill dis-
play a list of points of interest belong-
ing to the category selected previously
(e.g. restaurants), sorted according to
distance from your current location, in-
cluding distanceand name. Scroll
through the list using the “
N” or “O”
keys and press SRC/OKor
ß/MAIN
to select the point of interest.
❒If you select points of interestELSE-
WHERE Blue&Me™ Navwill ask
you to specify the point of interest
country and town/city, in the same way
as when entering an address.
Blue&Me™ Navwill display a list of
points of interest in the chosen cate-
gory in alphabetical order.
Scroll through the list using the “
N”
or “O” keys and press SRC/OKor
ß/MAINto select the point of inter-
est required.Note
If the point of interest selected using the
previous options has a telephone number
and your Bluetooth
®mobile phone is
connected to Blue&Me™ Nav, the sys-
tem will allow you to decide whether to
start navigating toward the chosen point
of interest or make a phone call. Select the
required option by pressing SRC/OKor
ß/MAIN.
}Or use voice interaction by press-
ing
‘and saying “Navigation”.
Once the system message has fin-
ished, say “New destination” and
then “Points of interest”.
Then say “List” e Blue&Me™ Nav
will provide you with a list of the available
categories. If you already know which of
the categories stored on your USB device
you require you may say it directly.
Refer to the “NAVIGATION VOICE
COMMANDS” section for a list of avail-
able categories.The system will ask you for confirmation,
say “Yes“ or press SRC/OKor
ß/MAIN. Otherwise say “No“.
Now Blue&Me™ Navwill prompt you
to choose between “local” points of in-
terest or “elsewhere” by means of voice
synthesis.
❒If you select “local”, Blue&Me™
Navwill display a list of points of in-
terest belonging to the category se-
lected previously (e.g. restaurants),
sorted according to distance from your
current location, including distance
and name.
Scroll through the list using the “
N” or
“O” keys and press SRC/OKor
ß/MAINto select the required point
of interest.
❒If you say “elsewhere” Blue&Me™
Navwill ask you to specify the point of
interest country and town/city, in the
same way as when entering an address.
Blue&Me™ Navwill display a list of
points of interest in the chosen cate-
gory in alphabetical order.
Scroll through the list using the “
N” or
“O” keys and press SRC/OKor
ß/MAINto select the point of inter-
est required.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 42

43
Note
If the point of interest selected using the
previous options has a telephone number
and your Bluetooth
®mobile phone is
connected to Blue&Me™ Nav, the sys-
tem will ask you if you wish to start navi-
gating toward the chosen point of interest
or make a phone call. Say “Start” to start
navigating or “Call” to make the phone
call.
After making the selection, Blue&Me™
Navwill display the name, distance and
address of the point of interest and ask for
confirmation in order to begin navigating.
Resume navigation
Blue&Me™ Navallows you to resume
navigation toward a set destination if nav-
igation has been suspended using the
STOP NAVIGATIONcommand.
?
To resume navigation, using manu-
al interaction:
Activate the main Menu, select the
NAVIGATIONoption and then
press SRC/OKor
ß/MAIN.Select the RESUME NAVIGA-
TIONoption by pressing SRC/OK
or
ß/MAIN.
Blue&Me™ Navwill ask you to
confirm the operation, press
SRC/OKor
ß/MAINto confirm
or
&/ESC” to cancel the above op-
eration.
}With voice interaction:
press
‘and say “Navigation” and
then, once you have heard the sys-
tem message, say “Resume navi-
gation”. The system will ask you to
say “Yes” to resume navigation or
“No” to cancel the above opera-
tion.
Note
If you turn your car’s ignition key to
STOPduring a navigation session,
Blue&Me™ Navwill automatically sus-
pend navigation.
When you turn your car’s ignition key to
MAR, the system will ask you if you wish
to resume navigation and show the preset
destination address on the reconfigurable
multifunction display.
?
With manual interaction press
SRC/OKor
ß/MAINto resume
navigation or
&/ESCin order not to
activate.
}With voice interaction, say “Yes”
to resume navigation or “No” in or-
der not to activate
Arrival information
Blue&Me™ Navis able to provide you
with an estimated time of arrival at your
destination and distance to the destination.
?
With manual interaction:
Activate the main Menu, select the
NAVIGATIONoption and then
press SRC/OKor
ß/MAIN.
Select the ARRIVAL INFORMA-
TIONoption by pressing SRC/OK
or
ß/MAIN.
Blue&Me™ Navwill display an es-
timated time of arrival and estimat-
ed distance remaining to the desti-
nation.
Note
When the car is moving, the arrival infor-
mation may be displayed immediate-
lyby pressing the NAVkey on the key-
pad near the courtesy light (see fig. 1).
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 43

44
}With voice interaction: press ‘and say “Navigation” and then,
once you have heard the system
message, say “Arrival informa-
tion”. Blue&Me™ Navwill display
the estimated time of arrival and the
estimated distance remaining to the
destination.
Note
If the trip duration exceeds 10 hours, an
indication of the remaining trip time will
be given instead of the estimated time of
arrival.
Stop navigation
If the car is actively navigating towards a
destination, Blue&Me™ Navwill allow
you to suspend the current navigation.
You can, however, resume the interrupt-
ed navigation at any time you want.
See RESUME NAVIGATION para-
graph.
?
To suspend navigation, with manu-
al interaction:
Activate the main Menu, select the
NAVIGATIONoption and then
press SRC/OKor
ß/MAIN.Select the STOP NAVIGATION
option by pressing SRC/OKor
ß/MAIN. Blue&Me™ Navwill ask
you to confirm the operation, press
SRC/OKor
ß/MAINto confirm or
&/ESCto continue the set navigation.
}With voice interaction:
press
‘and say “Navigation” and
then, once you have heard the sys-
tem message, say “Stop naviga-
tion”. The system will ask you to
say “Yes” to stop navigation or
“No” to continue the set navigation.
Recent destinations
Use the RECENT DESTINATIONS
function to call up one of the last 20 des-
tinations stored by Blue&Me™ Navin a
dedicated list.
?
When in the main menu, select the
NAVIGATIONoption and then
press SRC/OKor
ß/MAIN.Select the RECENT DESTINA-
TIONSoption and press SRC/OK
or
ß/MAINto confirm.
The system will show a list contain-
ing the most recent destinations set
on the Blue&Me™ Navon the re-
configurable multifunction display.
Select the required destination us-
ing the “
N” or “O” keys and press
SRC/OKor
ß/MAINto confirm.
The display will show the required
destination. You may choose be-
tween the START NAVIGA-
TIONand CANCEL DESTINA-
TIONcommands.
Select the required option using the
“
N” or “O” keys and press
SRC/OKor
ß/MAINto confirm.
If you wish to delete all the stored
destinations, scroll through the list
to display the DELETE ALLop-
tion. Press SRC/OKor
ß/MAIN
to confirm.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 44

45
}Or with voice interaction, press ‘and say “Navigation”. Then, once
the system message has finished, say
“Recent destinations”.
Blue&Me™ Navwill show a list of
the latest destinations entered on
the multifunctional display.
Select the required destination by
saying “Forward” or “Back”. Say
“Start” to start navigation or
“Delete” to delete the displayed
destination.
If you wish to delete all the stored
destinations, say “Delete all” and
confirm the operation when
prompted by the system.
Note
In order to start navigating towards the
last destination selected, the USB device
containing the maps must be inserted in
the USB port on the car.Navigation settings
The NAVIGATION SETTINGSmenu
allows you to establish navigation options,
e.g. by indicating whether you want
Blue&Me™ Navto calculate the fastest
or shortest route or whether motorways
or ferries should be included in the route
calculation.
This menu may also be used to set your
preference for voice completion of the
destination by means of the DICTATE
DESTINATIONoption.
?
In order to access the navigation set-
tings, using manual interaction, pro-
ceed in the following way:
Activate the main Menu, select the
NAVIGATIONoption and then
press SRC/OKor
ß/MAIN.
Select the NAVIGATON SET-
TINGSmenu and press SRC/OK
or
ß/MAINto confirm.
}Or with voice interaction:
Press
‘and say “Navigation”.
Once you have heard the system
message, say “Navigation set-
tings”. Blue&Me™ Navwill dis-
play a list of the available options.
The available options are:
❒Type of Route
Use this option to tell Blue&Me™ Nav
whether you want the calculated route to
be FASTERor SHORTER.
?Using manual interaction, proceed
as follows:
Select the TYPE OF ROUTEop-
tion and then press SRC/OKor
ß/MAIN.
Select the required option using the
“
N” or “O” keys and press
SRC/OKor
ß/MAINto confirm.
}Or with voice interaction:
Press
‘and say “Type of route”.
Blue&Me™ Navwill tell you the
current setting using voice synthe-
sis and will ask you if you wish to
change it. Answer “Yes” to change
the option, “No” to maintain the
current setting.
For road safety reasons, it is
only possible to enter a new
destination with the car at a stand-
still.
WARNING
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 45

46
❒Set motorways
Use this setting to tell Blue&Me™ Nav
if you wish to give preference to motor-
ways when calculating the route.
?
With manual interaction, proceed as
follows:
Select the SET MOTORWAYs
option by pressing SRC/OKor
ß/MAIN.
Select YESor NOusing the “
N”
or “O” keys and press SRC/OKor
ß/MAINto confirm.
}Or with voice interaction:
Press
‘and say “SET MOTOR-
WAYS”. Blue&Me™ Navwill
tell you the current setting using
voice synthesis and will ask you if
you wish to change it. Answer
“Yes” to change the option, “No”
to maintain the current setting.
❒Set ferries
Use this setting to tell Blue&Me™ Nav
whether you wish to include sections that
involve the use of ferries.
?
With manual interaction, proceed as
follows:
Select the SET FERRIESoption
and then press SRC/OKor
ß/MAIN.
Select YESor NOusing the “
N”
or “O” keys and press SRC/OKor
ß/MAINto confirm.
}Or with voice interaction:
Press
‘and say “Set ferries”.
Blue&Me™ Navwill tell you the
current setting using voice synthesis
and will ask you if you wish to
change it. Answer “Yes” to change
the option, “No” to maintain the
current setting.
❒Set tolls
Use this setting to tellBlue&Me™ Nav
whether you wish to include sections of
road that require payment of a toll in the
route calculation.
?
With manual interaction, proceed
as follows:
Select the SET TOLLSoption by
pressing SRC/OKor
ß/MAIN.Select YESor NOusing the “
N”
or “O” keys and press SRC/OKor
ß/MAINto confirm.
}Or with voice interaction:
Press
‘and say “Set tolls”.
Blue&Me™ Navwill tell you the
current setting using voice synthe-
sis and will ask you if you wish to
change it. Answer “Yes” to change
the option, “No” to maintain the
current setting.
❒Dictate destination
Use this setting to set your preference for
voice completion during destination input.
if you wish to set DICTATE DESTI-
NATIONto NO, the destination will be
entered in exclusively manual mode. It will
not therefore be possible to complete the
town/city or road name by voice.
?
With manual interaction, proceed
as follows:
Select the DICTATE DESTINA-
TIONoption by pressing SRC/OK
or
ß/MAIN.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 46

73
NAVIGATION SYSTEM VOICE COMMANDS
• Navigation
• Navigator
Activate the NAVIGATIONmenu
• Next maneuver
• Maneuver
• Next
• Next maneuver
Repeat the last voice message
during navigation
• Resume navigation
• Resume
• Activate
• Navigate
Resume previously interrupted
navigation
Provides an estimated time
of arrival and estimated distance
from destination
• Arrival information
• Information
• Arrival
Interrupt a navigation session
• Interrupt navigation
• Interrupt navigation
• Suspend
• Interrupt
Call up the menu to enter
a destination
• New destination
• New
• New
• Destination
• New route
• Address
Used to enter a destination
address
• Points of interest
• POI
• Select POI
• Select points of interest
• Select
Used to enter a Points of interest
for a destinationProvides a voice
list of available
categories of
points of interest
• List
• List
• List POI
• List POIs
• List points of interest
• List points of interest
• List
Select the Airport
category• Airport
• Airports
Select the Bus
Station category
• Bus station
• Bus
• Coach
• Bus station
• Bus stations
Select the Ferry
Terminal category
• Ferry terminal
• Ferries
• Boats
• Ferry terminal
Select the
Hospital category• Hospital
• Hospitals
Select the
Park&Ride
category• Park and ride
Select the Car
Park category• Car park
• Car parks
Select the Police
Station category• Police station
• Police station
Select the Car
Rental Agencies
category• Car Rental Agencies
• Car rental
• Enter number
• Enter house
number
• Civic number
• Number
• Start
• Start
• Start navigation
• Local
• Locally
• Nearby
• Elsewhere
• Other place
• Other town/city
Used to enter destination
address house number
Start navigating towards the
displayed destinationUsed to select a point
of interest near the car
Used to select a point of interest
near a selected address
• Enter road
• Enter street
• Road
• Street
• City centre
• Centre
Start navigating to the
town/city centre Used to enter name of
destination road/street
continued➯
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 73

74
Call up one a recent
destination set
Set the type of route
• Recent destinations
➯continues
• Navigation
• Navigator
Activate the NAVIGATIONmenu
• Next maneuver
• Maneuver
• Next
• Next maneuver
Repeat the last voice message
during navigation
Use to set preferences for
the type of route
• Navigation settings
Provides an indication of
latitude, longitude and number
of GPS satellites visible
• Vehicle position
• Route simulation
• Simulation
Simulates the set route
• Type of route
• Type of route
• Set type of route
• Route
Include or exclude motorways
from the route calculation
• Set motorways
• Motorways
Include or exclude ferries
from the route calculation
• Set ferries
• Ferries
• Boats
Include or exclude toll roads from
the route calculation
• Set tolls
• Tolls
• Set toll
• Toll
Enable or disable completion
of the destination by voice.
• Dictate destination
• Dictate
• Dictate destination
Start navigating towards the
displayed destination
• Start
• Navigate
Display the next destination
in the list
• Forward
• Next
Display the previous desti-
nation in the list
• Back
• Previous
Delete the displayed
destination
• Delete
Delete all the destinations
in the list
• Delete all
Select the Picnic
Area category• Picnic area
Select the Train
Station category• Train Station
• Train station
• Trains
Select the Vehicle
Service category• Vehicle service
• Vehicle service
Select the Service
Station category
• Petrol station
• Service stations
• Petrol station
• Petrol stations
Select the
Chemist category• Chemist
• Chemists
Select the
Restaurant
category• Restaurant
• Restaurants
Select the Hotel
category• Hotel
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 74