Page 6 of 216
II
99
1
12
6
8
14
13
2
3
5
7910
15
16
1718
4
11
IN BRIEF
1. Controls - Windows / Rear view mirrors / Child
safety
2. Driver's seat adjustment controls and memories
3. Controls - Lighting / Direction indicators / Rear
foglamps / Voice recognition
4. Horn
5. Instrument panel
6. Head-up display cavity
7. Ignition switch
8. Controls - Wipers
9. Controls - Radio controls under the steering wheel
10. Controls at the steering wheel - Speed limiter and
Cruise control
11. Driver's airbag
12. Gear lever
13. Electric parking brake
14. Automatic gearbox SPORT/SNOW mode controls
15. Steering column adjustment
16. Head-up display controls
17. F u e l fl a p c o n t r o l
18. O d d m e n t s t r a y / F u s e b o x a c c e s s fl a p
D A S H B O A R D
Page 11 of 216
I
14
A
B
IN BRIEF
LIGHTING
Ring A
Sidelamps.
Dipped beams/main beams.
Lamps off.
Pull the control stalk towards youto change between dipped beam and main beam.
Front foglamps and rear foglamps on.
Front foglamps on.
Switching off
First action rearwards, rear foglamps off.
Second action rearwards, front and rear foglamps off.
Ring B
WIPERS
Control positions2. Rapid wipe.1. Normal wipe.I. Intermittent wipe.0. Off.
One press downwards:AUTO:Automatic wipe activated.
Single wipe.
Page 20 of 216
23
II
W I P E R S
CHANGING THE WIPER BLADES
If you have to replace them, the wiper blades have to be parked in the maintenance position. For this, switch off the ignition and then within one minute move the wiper control stalk. The wipers stand up in a vertical position.
After replacement, switch on the ignition and move the wiper control stalk so that the wipers resume their normal position.Note: t h i s a c t i o n p l a c e s t h e P i l o t e d D e fl e c t o r i n t h e m a i n t e n a n c e p o s i t i o n . S e e “ P i l o t e d D e fl e c t o r ” .
WINDSCREEN WASH
To operate the windscreen wash, pull the wiper stalk towards you.
The screen wash is accompanied by a timed wipe of the windscreen , the headlamp wash also activates if the dipped beams are on.
The display of a message indicates that there is only approx. one litre of s c r e e n w a s h fl u i d r e m a i n i n g .
In freezing conditions, always check that the wiper blades are free to operate.
Remove any accumulation of snow at the base of the windscreen.
Page 22 of 216
25
II
41/58/61
A
S I G N A L L I N G
LIGHTING CONTROL STALK
All vehicle lamps off
Sidelamps on
Dipped beams/main beams on
Dipped beams/main beams dipswitch
Rotate the ring A forwards.
Rotate the ring A forwards.
AUTOMATIC LIGHTING OF HEADLAMPS
Sidelamps and dipped beams come on automatically in poor ambient light, or if the wipers are in continuous operation. They go out as soon as the a m b i e n t l i g h t a g a i n b e c o m e s u f fi c i e n t o r w h e n t h e w i p e r s c e a s e t o o p e r a t e .
Activation/deactivation of this function is possible in the menu “Personalisa- t i o n / C o n fi g u r a t i o n ” i n t h e “ M a i n m e n u ” .Note: Activation of this function is immediate while deactivation re quires the ignition to be switched off.
Take care not to cover the brightness sensor, which is visible from out-side the windscreen, behind the interior rear view mirror.
GUIDE-ME-HOME LIGHTING
This function switches on your headlamps, to light your way when you wish to walk from a carpark, for example.
This function is activated:Manually by pulling the con-trol A towards you, with the ignition switched off.Automatically, provided:
The automatic lighting of headlamps is activated.To activate the guide-me-home lighting function, select in the “Main menu”, then in “Personalisation/Configura-tion”, the sub-menu for light-ing and signalling, then acti-vate the function.
See “Multifunction display”.Note: It is possible to modify the duration of the guide-me-home lighting (approx. 60, 30 or 15 sec-onds) in the menu “Personalisa- t i o n / C o n fi g u r a t i o n ” .
