2007 CHEVROLET TRAIL BLAZER radio

[x] Cancel search: radio

Page 186 of 574

CHEVROLET TRAIL BLAZER 2007 1.G Owners Manual Battery Run-Down Protection
This feature shuts off the dome, courtesy, and
vanity lamps if they are left on for more than
20 minutes when the ignition is off. This will
keep the battery from running d

Page 206 of 574

CHEVROLET TRAIL BLAZER 2007 1.G Owners Manual If, after several seconds, all status indicator lights
remain on, or if there are no lights at all, there
may be a problem with the lights or the passenger
sensing system. See your dealer for service.

Page 238 of 574

CHEVROLET TRAIL BLAZER 2007 1.G Owners Manual Audio System(s)
Determine which radio your vehicle has and then
read the pages following to familiarize yourself
with its features.
Driving without distraction is a necessity for a
safer driving exper

Page 239 of 574

CHEVROLET TRAIL BLAZER 2007 1.G Owners Manual Notice:Before adding any sound equipment
to your vehicle, such as an audio system,
CD player, CB radio, mobile telephone,
or two-way radio, make sure that it can be
added by checking with your dealer/

Page 240 of 574

CHEVROLET TRAIL BLAZER 2007 1.G Owners Manual Radio with CD (Base)
If your vehicle has the Bose®audio system,
your vehicle has six Bose®ampli�ed speakers.
Radio Data System (RDS)
The audio system has a Radio Data System (RDS).
RDS features are

Page 241 of 574

CHEVROLET TRAIL BLAZER 2007 1.G Owners Manual XM™ Satellite Radio Service
XM™ is a satellite radio service that is based in
the 48 contiguous United States and Canada.
XM™ offers a large variety of coast-to-coast
channels including music, n

Page 242 of 574

CHEVROLET TRAIL BLAZER 2007 1.G Owners Manual AUTO VOL (Automatic Volume):With automatic
volume, the audio system adjusts automatically
to make up for road and wind noise as you drive
by increasing the volume as vehicle speed
increases.
Set the v

Page 243 of 574

CHEVROLET TRAIL BLAZER 2007 1.G Owners Manual Setting Preset Stations
Up to 30 stations (six FM1, six FM2, and six AM,
six XM1 and six XM2 (if equipped), can be
programed on the six numbered pushbuttons,
by performing the following steps:
1. Turn
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 ... 80 next >