Page 409 of 496
Removing the Spare Tire and Tools
The equipment you will need is located in the
trunk.
1. If your vehicle has a
center retainer, turn
it counterclockwise
to remove it.
2. Lift and remove the compact spare tire cover.3. Remove the washer and retainer that holds
down the jack and wheel wrench.
4. Remove the jack container with the jack and
the wheel wrench.
5. Remove the spare tire from the vehicle. See
Compact Spare Tire on page 418for more
information.
409
Page 410 of 496
The tools you will be using include the jack (A)
and the wheel wrench (B).
Removing the Flat Tire and
Installing the Spare Tire
1. Place the wheel wrench securely over the
wheel nut. Turn the wheel wrench
counterclockwise to loosen all the wheel nuts,
but do no remove them yet.
410
Page 411 of 496
2. Turn the jack handle clockwise to raise the
jack lift head.
{CAUTION:
Raising your vehicle with the jack
improperly positioned can damage the
vehicle and even make the vehicle fall. To
help avoid personal injury and vehicle
damage, be sure to t the jack lift head
into the proper location before raising the
vehicle.
3. Put the jack into the ange in the frame which
is located near each wheel well. The anges
are accessible through openings in the
plastic trim at the bottom of the vehicle. The
front opening is about 8 inches (20 cm)
back from the front wheel well. The rear
opening is about 3 inches (8 cm) forward from
the rear wheel well.
411
Page 412 of 496