9
(Decrease Fan Speed):Press to
lower fan speed.
(Increase Fan Speed):Press to
raise fan speed.
(Air Conditioning):Press to activate
or deactivate air conditioning.
(Recirculation):Press to prevent
outside air from entering your vehicle.
Recirculation can be activated in Vent orBi Level mode, but not in Floor/Defog orDefrost mode.
(Rear Window Defog):Press to
clear the rear glass (it turns off afterabout 20 minutes). Press again forextended operation. Press again or
switch off the ignition to turn off.
(Floor mode):Press to direct most
of the air to the floor.
(Bi Level mode):Press to direct
most of the air to the instrument paneland floor outlets.
(Vent mode):Press to direct air
through the instrument panel outlets.
(Floor/Defog):Press to clear the
windshield and front side windows ofmist and frost.
(Defrost):Press to clear the wind
shield of heavier amounts of mist and
frost more quickly.
(Heated Seats):Press to turn the
driver or passenger heated seat on/off.
See Section 3 of your Owner Manual.
ENTERTAINMENT
Audio Systems
Setting the Time
Press and hold the H button on the
sound system faceplate until the correct
hour appears on the display. Press
and hold M until the correct minute
appears. The ignition does not need to
be turned on.
Radio Controls
(Power):
Press to turn the system on
or off.
(Volume):Turn to increase/decrease
volume.
BAND:Press to switch between AM,
FM1/FM2 and XM1/XM2 (if equipped).
DISP (Display): Press to switch the dis
play between the radio station frequency
and the time. With the ignition off, pressto display the time.
While in XM mode (if equipped), press
to display the artist, song title, categoryand channel.
INFO (Information) (if equipped):While
in XM mode (if equipped), press to dis
play a current radio station messageand other information, if available.
SCV (Speed Compensated Volume):Press to select Off, Min, Med or Max
radio volume compensation as vehiclespeed increases.
LaCrosse 2007 A.qxd 4/25/06 11:14 AM Page 9
Getting to Know YourLaCrosse10
Setting Preset Stations:
1. With the radio on, press BAND to
select AM/FM1/FM2 or XM1/XM2 (if equipped).
2. Tune to the desired station.
3. Press EQ to select equalization.
4. Press and hold a numbered push
button until a beep sounds.
Repeat for each pushbutton of each
band (up to 30 possible stations).
CD Controls
With the ignition on, insert a CD, label
side up, partway into the slot. The player
will pull it in and begin playing. To insert
with ignition off, first press eject or DISP.
1 (Reverse):Press to go to the
start of the current track if more thaneight seconds have played. Hold or
press more than once to move back ward through the CD tracks.
2 (Fast Forward):Press to go to
the next track. Hold or press more thanonce to forward through the upcoming CD tracks.
4RDM (Random):Press to hear tracks
in random order. Press again to disable
random play.
(Seek):Press the left arrow to go
to the start of the current track or theprevious track. Press the right arrow togo to the start of the next track. Pressthe arrows for more than two seconds tosearch previous or next tracks. Releaseto stop searching and play the track.
DISP (Display):Press to display the
current CD track and the elapsed timethe current track has played.
BAND:Press to switch to the radio
when a CD is playing. The CD remains
inside the player.
(Tune/Balance/Fade):Turn to
select radio stations.
To set Bass/Treble, push and release
until BAS or TRE appears. Turn to
increase or decrease. To adjust to themiddle position, press and hold until itbeeps.
To adjust Balance, push and release
until BAL appears. Turn the knob to
move the sound toward the right or left.
To adjust Fade, push until FAD appears.
Turn the knob to move the sound toward
the front or rear.
To adjust all controls to the middle posi
tion, push/hold the speaker knob whenno tone or speaker control is displayed.
ALL CEN appears and the unit beeps.
(Seek):Press and release the
left/right Seek arrow to go to the previ ous or next station and stay there.
To scan, press and hold either arrow for
more than two seconds. SCAN appears
on the display and a beep sounds. The
radio finds a station, plays a few sec onds and advances to the next. Presseither arrow or a pushbutton to stopscanning.
To scan preset stations, press and hold
either arrow for more than four seconds.PSCAN appears and two beeps sound.Press either arrow or a pushbutton tostop scanning presets.
LaCrosse 2007 A.qxd 4/25/06 11:14 AM Page 10