2007 Alfa Romeo 156 engine

ALFA 156 SPORTWAGON
285
CURRENT SOCKET (optional for versions/markets
where applicable) (fig. 20)
This is on the left-hand side of the boot.
To use the socket, open the lid (A). The
socket is supplied with the ignition switch at
MARand can only be used with accessories
that absorb a maximum of 15A (power
180W).
OBJECTS RETAINER NET(optional for versions/markets
where applicable)
The net can be hooked in different posi-
tions (fig. 24-25-26-27) using hous-
ings (Aand B-fig. 21) provided in the
front part of the boot and housings (Cand
D-fig. 22) in the rear part. Do not connect acces-
sories with higher absorp-
tion to the socket. Pro-
longed current absorption might
drain the battery preventing the
engine from being started.
fig. 20
A0B0093m
fig. 22
A0B0102m
fig. 21
A0B0101m

TECHNICAL SPECIFICATIONS
299
BODY LABELThe body label carrying the following in-
formation is located in the engine bay to one
side of the right-hand shock absorber up-
per connection:
– Type of vehicle: ZAR 932000
– Manufacturer’s serial number (chassis
number).
For some versions/markets the marking
is partially covered by a protection. To see
the marking completely, remove the cap
turning counter-clockwise and raise the pro-
tection.
ENGINE LABELSOn the rear left-hand side, gearbox side.
IDENTIFICATION DATAThe identification data should be recorded.
The identification data is carried on labels lo-
cated in the following positions (fig. 1-2):
1- Identification label
2- Body label
3- Bodywork paint identification label
- Saloon versions = fig. 1
- Sportwagon versions = fig. 2
4- Engine label.
T T
E E
C C
H H
N N
I I
C C
A A
L L

S S
P P
E E
C C
I I
F F
I I
C C
A A
T T
I I
O O
N N
S S
fig. 1
A0B0590m
fig. 2
A0B0058m

TECHNICAL SPECIFICATIONS
300
fig. 3
A0B0059m
BODYWORK PAINT
IDENTIFICATION LABELOn the Saloon versions, the plate is ap-
plied in the internal part of the luggage com-
partment (3-fig. 1), while on the Sport-
wagon versions it is applied on the right-
hand internal edge of the tailgate (3-
fig. 2). The plate carries the following da-
ta (fig. 3):
A.Paint manufacturer
B.Name of colour
C.Colour code
D.Colour code for touching up and re-
spraying.
IDENTIFICATION LABELThis is located in the engine bay on the
front crossmember (fig. 4).
It carries the following identification data:
A.Space for details of national ho-
mologation
B.Space for punching the consecutive
chassis number
C.Space available for maximum
weights authorised by various national lawsD.Space for version and any supple-
mentary indications to those specified
E.Space for smoke index (diesel ver-
sions only)
F.Space for punching manufacturer’s
name.fig. 4
A0B0076m

TECHNICAL SPECIFICATIONS
301
Body code
ENGINE AND BODY VERSION CODES1.6 T.SPARK 1.8 T.SPARK 2.0 JTS2.0 JTS Selespeed2.5 V6 24V2.5 V6 24V Q-SystemJTD
JTD 16V MultijetJTD 20V Multijet(*) Version for specific markets(**) 150 CV version (for versions/markets where applicable)(Sportwagon versions)
932B4100 38H
932B4100 38G (*)
932B4B00 39E (*)
932B3100 37H
932B3100 37G (*)
932BXA00 53E
932BXA00 53D (*)
932BXA01 55E
932BXA01 55D (*)
932B1100 33E
932B1101 34E
932B2C00 45F
932BXE00 61E
932BXN00 72 (**)
932BXG00 63C (*)
932BXL00 67 (*)
932BXF00 65C
932BXM00 69 (*)
(Saloon versions)
932A4100 31L
932A4100 31H (*)
932A4B00 32F (*)
932A3100 30L
932A3100 30H (*)
932AXA00 52E
932AXA00 52D (*)
932AXA01 54E
932AXA01 54D (*)
932A1100 26F
932A1101 27F
932A2C00 44G
932AXE00 60E
932AXN00 71 (**)
932AXG00 62C (*)
932AXL0066 (*)
932AXF00 64B
932AXM00 68 (*)
Engine code
AR32104
AR32103 (*)
AR32205
937A1000
932A2000 (*)
937A1000
932A2000 (*)
AR32405
AR32405
937A2000
192A5000
937A5000 (**)
937A4000 (*)
192B1000 (*)
841G000
841M000

TECHNICAL SPECIFICATIONS
302
ENGINECode typeCycleNo./position cylinders
Piston bore and stroke mmTotal displacement
Maximum horsepower
(EEC): kW
HPat rpm
Maximum torque (EEC):
Nm
kgmat rpm
Spark plugs (*)Fuel
1.6 T.SPARKAR32104
Otto
4 in line
82 x 75.65
1598 cm
3
88
120
6200
146
14.9
4200
NGK PFR6B +
NGK PMR7A
NGK BKR6EKPA
+
NGK PMR7A
Unleaded
petrol
95 RON
(specification
EN228)
1.8 T.SPARKAR32205
Otto
4 in line
82 x 82.7
1747 cm
3
103
140
6500
163
16.6
3900
NGK PFR6B +
NGK PMR7A
NGK BKR6EKPA
+
NGK PMR7A
Unleaded
petrol
95 RON
(specification
EN228)
2.0 JTS937A1000
Otto
4 in line
83 x 91
1970 cm
3
121
165
6400
206
21
3250
NGK PFR6B
NGK BKR6EKPAUnleaded
petrol
95 RON
(specification
EN228)
2.0 JTS
Selespeed937A1000
Otto
4 in line
83 x 91
1970 cm
3
121
165
6400
206
21
3250
NGK PFR6B
NGK BKR6EKPAUnleaded
petrol
95 RON
(specification
EN228)
2.5 V6 24V AR32405
Otto
6 in 60° V
88 x 68.3
2492 cm
3
141
192
6300
218
22.2
5000
NGK R PFR6B
Unleaded
petrol
95 RON
(specification
EN228)
2.5 V6 24V
Q-SystemAR32405
Otto
6 in 60° V
88 x 68.3
2492 cm
3
141
192
6300
218
22.2
5000
NGK R PFR6B
Unleaded
petrol
95 RON
(specification
EN228)

TECHNICAL SPECIFICATIONS
305
SPARK PLUGClean, intact spark plugs are determinant
with regard to engine efficiency and for re-
ducing the emission of pollutants.Spark plugs should be re-
placed at the intervals
specified in the Scheduled
Maintenance Programme. Only use
spark plugs of the specified type: if
the thermal capacity is inadequate
or if the envisaged life is not guar-
anteed inconveniences may ensue.BRAKESService brakes:
– front
– rearParking brake
If examined by an expert eye, the ap-
pearance of a spark plug is a sound clue
for locating a fault, even if not involving the
ignition system. Therefore if you are expe-
riencing any engine problems, it is impor-
tant to have the spark plugs checked by Al-
fa Romeo Authorized Services.
STEERING
1.6 T.SPARK 1.8 T.SPARK 2.0 JTS 2.0 JTS 2.5 V6 24V 2.5 V6 24V JTD JTD 20V
Selespeed Q-System JTD 16V Multijet
MultijetSelf-ventilated Self-ventilated Self-ventilated Self-ventilated Self-ventilated Self-ventilated Self-ventilated Self-ventilated
disk disk disk disk disk disk disk disk
Disk Disk Disk Disk Disk Disk Disk Disk
Wheel anti-look system (ABS) with electronic braking distribution.
Servo-brake. Electronic control with brake pad wear sensors. Gasket of ecological type.
Controlled by hand lever operating rear brakes.
Type Turning radius(between pavements)
1.6 T.SPARK 1.8 T.SPARK 2.0 JTS 2.0 JTS 2.5 V6 24V 2.5 V6 24V JTD-JTD 16V JTD 20V
Selespeed Q-System Multijet Multijet
Rack and pinion.
Hydraulic power steering with liquid reservoir in engine compartment
11.1 m 11.1 m 11.1 m 11.1 m 11.6 m 11.6 m 11.1 m 11.1

TECHNICAL SPECIFICATIONS
319
2.0 JTS
63
●9 ●6.9
4.4 ◆2
–
–
–
2,5
5.32.0 JTS
Selespeed63 ●9 ●6.9
4.4 ◆2
–
0.6
–
2,5
5.3 1.8
T.SPARK
63
●9 ●6.9
4.4 ■2
–
–
–
2,5
5.3 1.6
T.SPARK
63
●9 ●6.9
4.4 ■2
–
–
–
2,5
5.32.5 V6
24V
63
●9 ●9.2
5.9 ■–
2
–
–
2,5
5.3JTD
63
❍9 ❍6.1
4.5 ❑2
–
–
–
2,5
5.3 2.5 V6
24V
Q-System63 ●9 ●9.2
5.9 ■–
–
–
3.8
2,5
5.3
REFILLING
JTD 20V
Multijet
63
❍9 ❍7.25
5 ❑
3.1
–
–
–
2,5
5.3
JTD 16V
Multijet
63
❍9 ❍6.1
4.5 ❑
2
–
–
–
2,5
5.3
Fuel tank: litres
– including a reserve of litresEngine cooling system litres
Oil sump and filter litresMechanical gearbox/differential litres
Mechanical gearbox/differential litres
Selespeed gearbox litresactuation hydraulic system
Q-System litresautomatic gearbox
Windscreen washer and
rearscreen washer fluid
reservoir: litres– with headlamp washer litresSpecified fuels
Recommended products
●Unleaded petrol at not
less than 95 R.O.N
(specification EN228)❍Diesel fuel for motor
vehicles (Specification EN590)Mixture of distilled water and
PARAFLU 11(blue) at 50% or
PARAFLU UP(red) at 50%■ SELENIA 20K for Alfa
Romeo◆SELENIA RACING❑ SELENIA WR
TUTELA CAR
ZC 75 Synth
TUTELA CAR MATRYX
TUTELA CAR CS SPEED
TUTELA GI/2
Mixture of water and liquid
TUTELA PROFESSIONAL
SC 35
■
For decidedly sportive use of the car, fully synthetic SELENIA RACING
SAE
10W-60 engine oil is recommended.
For use in particularly harsh weather conditions SELENIA PERFORMER MULTIPOWER
SAE
5W-30 engine oil is recommended.

TECHNICAL SPECIFICATIONS
320
FLUIDS AND LUBRICANTSUSABLE PRODUCTS AND THEIR SPECIFICATIONSUse Quality features of fluids and lubricants Recommended fluids Applications
for correct vehicle operation and lubricants
Lubricants for petrol
engines 2.0 JTS
and 2.0 JTS Selespeed
Lubricants for petrol engines (*)Lubricants for
diesel engines (*) For decidedly sportive use of the car fully synthetic SELENIA RACING SAE 10W60 engine oil is recommended.
For use in particularly harsh weather conditions SELENIA PERFORMER MULTIPOWERSAE 5W-30 engine oil is recommended.
SELENIA PERFORMER MULTIPOWERis not required when using SELENIA RACING10W-60 engine oil.
WARNINGDo not top up with oil with different specifications that the oil already in the engine.Synthetic oil, SAE 10W-60 grade
Synthetic-based engine oil, SAE 10W-40 grade
that pass ACEA A3 and API SL specifications.
Synthetic-based engine oil SAE 5W-30 grade,
that pass API SL, ACEA A1-A5, FIAT 9.55535-M1 specifications.
Synthetic-based engine oils SAE 5W-40 grade
that pass ACEA B4 and API CF, FIAT 9.55535-M2 specifications.SELENIA RACING
SELENIA 20K
for Alfa Romeo
SELENIA PERFORMER
MULTIPOWER
SELENIA WR
A0B0682m