CAR MAINTENANCE
257
ENGINE OIL Fig. 7: T.SPARK versions
Fig. 8: 2.0 JTS version
Fig. 9: 2.5 V6 24V version
Fig. 10: JTD versions
Fig. 11: JTD 16V Multijet version
Fig. 12: JTD 20V Multijet version
The engine oil level should be checked
when the car is standing on a level surface
a few minutes (about 5) after the engine
has been switched off.
Remove the dipstick (A), clean it, put it
back completely, remove it once again and
check that the level is between the MIN
and MAXmarks on the dipstick.
The interval between the MINand MAX
marks corresponds to approximately 1 liter
of oil.If the oil level is near or even below the
MIN, mark, add oil trough the filler neck
(B), until reaching the MAXmark. Never add oil with char-
acteristics (classification,
viscosity) which are differ-
ent from those of the oil already in
the circuit.fig. 7 - T.SPARK versions fig. 8 - 2.0 JTS version
A0B0170m
fig. 9 - 2.5 V6 24V version
A0B0169m
A0B0437m
When the engine is hot,
take care when working
inside the engine compartment to
avoid burns. Remember that when
the engine is hot, the fan may cut
in: danger of injury.
WARNING
Scarves, ties and other
loose clothing might be
pulled by moving parts.
WARNING
