2007 Acura RDX display

This monitor shows how much
to rque is being delivered to each
wheel. For more information, see
page .
You can see the pressure of each tire
in this monito r. If one or more tire
pressure are low, inflate them to the
correct pressure. For more
info rmation, see page . This
shows the temperature of the
engine’s coolant. During normal
operation, the reading should rise
from the ‘‘C (Cold)’’ mark to about
the middle of the gauge. In severe
driving conditions, such as very hot
weather or a long period of uphill
driving, the reading may rise to near
the ‘‘H (Hot)’’ mark of the gauge. If
it re ac hes the ‘‘H’’ mark, pull safely
to the side of the road. See page
for instructions and precautions
on checking the engine’s coolant
system. You
can receive or make phone calls
from your cellphone through your
vehicle’s HandsFreeLink (HFL)
system without touching your
cellphone.
To use the system, your cellphone
and the HFL system must be linked.
Not all cellphones are compatible
with this system. Ref er to page for instructions on how to link
your cellphone to the HFL and how
to receive or make phone calls, or
visit the handsf reelink.com website.
391
303
312 262
SH-AWD T orque Distribution
Monitor
Tire Pressure Monitor
T emperature Gauge
HandsFreeL ink
Multi-Inf ormation Display
Inst rument s and Cont rols
83
TM
——
y

y
() yy

If there is a problem with your
vehicle, for example, the engine oil
level is low or a door is not fully
closed, the multi-info rmation display
will show you the problem. It does
this by interrupting the current
display with one or more messages.
Here is a list of messages shown on
the multi-information display: See p
age
12
See page
394
See p
age
393
See p
age
393
See p
age
20
See p age
395 See p
age
313
See p age
312
See p age
68
See p ages
395, 396
Multi-Inf ormation Display
System Messages
84
U.S. Canada
Canada
U.S.
Canada
U.S.
——
y

y
() yy

CONTINUED
See page
12
See
page
295
See page
304
See page
304
See page
33
See page
307 See
page
315
See page
33
See page
123
See page
69 See
page
281
See page
353
See page
334
See page
130
Multi-Inf ormation Display
Inst rument s and Cont rols
85
U.S. Canada
——
y

y
() yy

ÛÝÛÝ
ÛÝ
ÛÝ
The system message(s) triggers the
appropriate indicator(s) on the
instrument panel, including the
system message indicator, to come
on. The system message indicator
does not go of f until the problem(s)
is corrected.
You will also hear a beep when the
system message indicator comes on
for the first time.
Most of the messages are displayed
f or about 5 seconds, and then the
normal display returns. If there are
several system messages to be
shown, the display switches these
messages every 5 seconds.
To cancel the message(s) bef ore 5
seconds elapsed, press the INFO
( / ) button on the steering wheel. Even if you press the INFO ( / )
button, some messages stay on or
come on again at regular intervals
until the problem is corrected.
You can see the message(s) again by
pressing the INFO ( / ) button
repeatedly if the system message
indicator remains lit on the
instrument panel.
FASTEN SEAT BELT
FASTEN PASSENGER SEAT
BELT
RELEASE PARKING BRAKE
Door and Tailgate Open
Multi-Inf ormation Display
86
SYSTEM MESSAGE INDICATOR
Press the INFO ( / ) button
——
y
y
() y
y

ÛÝÛÝ
With
the multi-information display
and the INFO ( / ) and SEL/
RESET buttons on the right side of
the steering wheel, you can
cu stomize some vehicle control
settings.
To enter the customizing mode,
press and hold the INFO ( / )
button for more than 3 seconds.
To change the settings, the ignition
switch must be in the ON (II)
position, and the vehicle must be
stopped with the tran smission in
Park. You
cannot customize the settings
under these conditions:
If you turn the ignition switch to
the ACCESSORY (I) or the LOCK
(0) position.
If you move the shift lever out of
Park. If
you want the settings as they were
when the vehicle left the factory,
select DEFAULT ALL, as described
on page .
Refer to the table in the next page
about the settings you want to
customize.
The
first customizing menu is:
CHG SETTING
DEFAULT ALL If
you want to change any vehicle
control settings, select CHG
SETTING, then press the SEL/
RESET button (see page ). 90
91
CONT INUED
Customized Settings
Multi-Inf ormation Display
Inst rument s and Cont rols
87
——
y
y
() yy

ÎÎÎ
Î Î
Î
Î Î
µ™¶™
µ™ ¶™
Î
Menu Item Setting Option Page
Group Setup Description
LANGUAGE SELECT ION
ADJUST OUTSIDE
TEMP. DISPLAY
TRIP A & AVG. FUEL
RESET with REFUEL
ELAP. TIME RESET
CONDITION
INTERIOR LIGHT
DIMMING T IME
HEADLIGHT AUT O OFF
TIMER
AUTO DOOR LOCK ENGLISH
FRENCH
SPANISH
5°F 0°F 5°F
3°C 0°C 3°C
ON
OFF
IGN RESET
TRIP A RESET
TRIP B RESET
15 sec
30 sec
60 sec
0sec
15 sec
30 sec
60 sec
SHIFT FROM P
WITH VEH SPEED
OFF 94
96
98
100
103
105
108
MET ER SET UP
(P.93)
LIGHTING SETUP
(P.102)
DOOR SETUP
(P.107) Changes the language used in the display.
Changes the outside temperature reading above or
below its current reading.
Causes trip meter A and the average fuel economy
to reset when you refuel.
Resets the elapsed time of your current trip.
Changes how long (in seconds) the interior lights
stay on after you close the doors.
Changes how long (in seconds) the exterior lights
stay on after you close the driver’s door.
Changes when the doors automatically lock.
: Default setting
Multi-Inf ormation Display
88
——
y
y
() yy

Î
Î
Î
Î
Î
Menu Item Page
Group Setup Setting Option
Description
DOOR LOCK MODE
KEYLESS LOCK
ACKNOWLEDGMENT
SECURITY RELOCK TIMER
AUTO DOOR UNLOCK 110
112
114
116
90
DOOR SETUP
(P.107)
DEFAULT ALL DRIVER DOOR
ALL DOORS
ON
OFF
30 sec
60 sec
90 sec
DRIVER’S DOOR WITH
SHIFT TO P
ALL DOORS WITH
SHIFT TO P
DRIVER’S DOOR WITH
IGN OFF
ALL DOORS WITH IGN
OFF
OFF
SET
EXIT
Changes which doors unlock with the remote
transmitter in a first push.
The exterior lights flash each time you press the
LOCK or UNLOCK button. A beeper will also
sound when you press the LOCK button twice.
Changes how long it takes (in seconds) for the
doors to relock and the security system to set after
you unlock and not opening the door.
Changes when the doors automatically unlock.
Changes all the customized settings as they were
the vehicle left the factory.
: Default setting
Multi-Inf ormation Display
Inst rument s and Cont rols
89
——
y

y
() yy

ÛÝÛÝ
If you want to set the def ault settings,
press the INFO ( / ) button to
select DEFAULT ALL, then press
the SEL/RESET button. To enter the customizing mode,
press and hold the INFO ( / )
button for more than 3 seconds. When DEFAULT ALL is set, you will
see the above display for several
seconds, then the screen returns to
CUSTOMIZE ENTRY.
To set the def ault settings, select
DEFAULT ALL, and press the SEL/
RESET button. Then select SET, and
press the SEL/RESET button.
Multi-Inf ormation Display
DEFAUL T AL L
90
——
yy
() yy