2007 Acura RDX display

This indicator comes on when you
turn the ignition switch to the ON
(II) position. If it comes on at any
other time, it indicates that the
passenger’s side airbag has
automatically shut off. For more
info rmation, see page .
You will also see a ‘‘PASSENGER
SIDE AIRBAG OFF’’ message on the
multi-info rmation display (see page
). You will also see a ‘‘CHECK ABS
SYSTEM’’ message on the multi-
info rmation display (see page ).
This
indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and when the ignition
switch is turned to the START (III)
position. If it comes on at any other
time, there is a problem with the
ABS. If this happens, have your
vehicle checked at a dealer. With
this indicator on, your vehicle still
has normal braking ability but no
an ti-lock function. For more
info rmation, see page . This
indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. It will then go off if
you have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink,
and the engine will not start (see
page ).
85
307
85 33
128
On RDX with Technology Package
model
On RDX with Technology Packagemodel
Instrument Panel Indicators
Side Airbag Of f Indicator Anti-lock Brake System
(A BS) Indicator
Immobilizer System
Indicator
Inst rument s and Cont rols
67
Canada
U.S.
——
y
y
() yy

This indicator has two functions:
Itcomesonwhenyouturnthe
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. A beeper
sounds if you drive with the
parking brake not fully released.
Driving with the parking brake not
fully released can damage the
brakes and tires.
You will also see a ‘‘RELEASE
PARKING BRAKE’’ message on the
multi-info rmation display (see page
). If
it remains on after you have
fully released the parking brake
while the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page .
You will also see a ‘‘BRAKE FLUID
LOW’’ or ‘‘CHECK BRAKE
SYSTEM’’ message on the multi-
info rmation display (see page ).The
brake system indicator (amber)
norm ally comes on for a few seconds
when you turn the ignition switch to
the ON (II) position. If the indicator
is still on or comes on again after the
engine starts, there is a problem in
the brake system including the
electric vacuum pump. If this
happens, have your vehicle checked
by your dealer. For more information,
see page .
You will also see a ‘‘CHECK BRAKE
SYSTEM’’ message on the multi-
info rmation display (see page ).
2.
1.
84
84 395
84396
On RDX with Technology Package
model On RDX with Technology Package
model
On RDX with Technology Packagemodel
Instrument Panel Indicators
Parking Brake and Brake System
Indicator (Red) Brake System Indicator (Amber)
68
U.S. Canada
U.S. Canada
——
y
y
() yy

Thisindicatorisi nthefuelgauge.It
comesonasareminderthatyou
mustrefuelsoon.Whentheindicator
comeson,th ereisabout2.0USgal
(7.6
)o ffuelrem aininginthetank
beforeth ereadingreachesE.There
isasmallreserveoffuelremaining
inth etankwhenthereadingdoes
reachE. You
will also see a ‘‘FUEL LOW’’
message on the multi-information
display (see page ).
Ifitcomesonandstaysonatany
other time, or if it does not come on
when you turn the ignition switch to
the ON (II) position, there is a
problem with the VSA system. Take
your vehicle to a dealer to have it
checked. Without VSA, your vehicle
still has normal driving ability, but
will not have VSA traction and
stability enhancement. See page
for more information on the
VSA system.
You will also see a ‘‘CHECK VSA
SYSTEM’’ message on the multi-
info rmation display (see page ).
This indicator normally comes on f or
a f ew seconds when you turn the
ignition switch to the ON (II)
position.
85
315
85
On RDX with Technology Package
model
On RDX with Technology Packagemodel
Instrument Panel Indicators
L ow Fuel Indicator Vehicle Stability Assist
(VSA ) System Indicator
Inst rument s and Cont rols
69
LOW FUEL INDICATOR
——
y

y
() yy

Itcomesonasareminderthatyou
have turned off the vehicle
stability assist (VSA) system.
This indicator h
as three functions: This indicator comes on wh en you
turn on the cruise control system by
pressing the CRUISE button (see
page ). The l
eft or right turn signal indicator
blinks when you signal a lane change
or tu rn. If an indicator does not blink
or blinks rapidly, it usually means
one of the turn signal bulbs is
burned out (see pages and ).
Replace the bulb as soon as possible,
since o ther drivers cannot see th at
you are signaling.
When you press the hazard warning
button, both turn signal indicators
and all turn signals on the outside of
the vehicle fl ash.
This indicator c
omes on when you
set the cruise control. See page for information on operating the
cruise control.
This indicator comes on with the
high beam headlights. For more
info rmation, see p age .
This indicator also comes on with
reduced brightness when the
daytime running lights (DRL) are on
(see page ).
It flashes w
hen VSA is active (see
page ).
It comes on along with the VSA
system indicator if there is a
problem with the VSA system.
You will also see a ‘‘CHECK VSA
SYSTEM’’ message on the multi-
information display (see page ).
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. See page for more
inf ormation on the VSA system. 1.
2.
3. 241
241
122
123 362
360
315
85 315
On RDX with Technology Packagemodel
Instrument Panel Indicators
VSA A ctivation Indicator
Cruise Control IndicatorTurn Signal and Hazard Warning
Indicators
Cruise Main Indicator
High Beam Indicator
70
——
y
y
() yy

If you see a ‘‘CHECK DRL
SYSTEM’’ message on the multi-
info rmation display, there is a
problem in the high beam headlight’s
ci rcuit. Take your vehicle to a deal er
to have it checked (see page ).This
indicator comes on when the
security system is set. For more
info rmation, see page .
If
this indicator comes on when the
ignition switch is turned to the ON
(II) position and the parking brake is
rele ased, it means there is a problem
in the high beam headlight’s circuit.
Have your vehicle checked by your
dealer. This
indicator reminds you that the
exterior lights are on. It comes on
when the light switch is in either the
or position. If you turn the
ignition switch to the ACCESSORY
(I) or the LOCK (0) position without
turning off the light switch, this
indicator will remain on. A reminder
chime will also sound when you open
the driver’s door and remove the key
from the ignition switch.
This indicator comes on when you
turn on the f og lights. For more
inf ormation, see page . 122
85 240
On RDX with Technology Package
model
On RDX model only
Instrument Panel Indicators
Security System Indicator
Daytime Running L ights
Indicator Lights On Indicator
Fog L ight Indicator
Inst rument s and Cont rols
71
SECURITY SYSTEM INDICATOR
——
y

y
() yy

If a ‘‘CHECK SH-AWD SYSTEM’’
message on the multi-information
display comes on (see page )
along with the SH-AWD indicator at
any other time, there is a problem in
the SH-AWD system.
If
this indicator comes on at any
other time, there is a problem in the
SH-AWD system. Avoid rapid
accele ration, and take your vehicle to
a dealer to have it checked as soon
as possible.
This
indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If
this indicator blinks while driving,
it indicates the differential
temperature is too high.
If this indicator blinks while driving,
you will also see an ‘‘SH-AWD DIFF
TEMP HIGH’’ message on the multi-
info rmation display (see page ).
Pull to the side of the road wh en it is
safe, shift to Park, and let the engine
idle until the indicator goes out. If
the indicator does not go out, take
your vehicle to a dealer to have it
checked.
For more information, see page .
This monitor is displayed as the
system message on the multi-
info rmation display (see page ).
This monitor normally comes on f or
a f ew seconds when you turn the
ignition switch to the ON (II)
position. While driving, the
appropriate tire indicator will come
on, along with the low tire pressure
indicator, if a tire is extremely
underinf lated or has suddenly lost
pressure. See
forwhattodoif this
indicator comes on.
85
303
85
312
On RDX with Technology Packagemodel On RDX with Technology Package
model
On RDX with Technology Packagemodel
On RDX model
Instrument Panel Indicators
SH-A WD Indicator
T ire Pressure Monitor
L ow Tire Pressure
Indicator
72
Continuing to drive with the SH-AWD
indicator blinking may cause serious
damage to the system.
——
y
y
() yy

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position.
If it comes on while driving, it
indicates that one or more of your
vehicl e’s tires are extremely low on
pressure. This
indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position.
If this indicator comes on and stays
on at any other time, or if it does not
come on when you turn the ignition
switch to the ON (II) position, there
is a problem with the TPMS. With
this indicator on, the low tire
pressure indicator and the tire
pressu re monitor will not come on
when a tire loses pressure. Take the
vehicle to your dealer to have the
system checked.
If
this happens, pull to the side of the
road when it is safe. If it is becau se
of a flat tire, replace the flat tire with
thecompactspare(seepage ),
and have the flat tire repaired as
soon as possible. If two or more tires
are underinflated, call a professional
towing service (see page ). For
more information, see page .
Check
the tire pressure monitor on
the multi -information display and
determinethecause(seepage ).
You
may see one or more of the low
pressu re tire positions the display
are displayed along with this
message. You will also see a ‘‘CHECK TIRE
PRESSURE’’ message on the multi-
info rmation display (see page ).
Check which tire has lost pressure
on the tire pressure monitor (see
page ), and determine the cause. 84
403 309
311
313
383
On RDX with Technology Package model On RDX model only
On RDX model
Instrument Panel Indicators
Low Tire Pressure
Indicator Tire Pressure Monitoring
System (T PMS) Indicator
Inst rument s and Cont rols
73
——
y



y
() yy

This indicator comes on for a few
seconds when you turn the ignition
switch to the ON (II) position. It
remindsyouthatitistimetotake
your vehicle in for scheduled
maintenance. The maintenance main
items and sub items will be displayed
in the information display. See page
for more information on the
maintenance minder.
This indicator goes off when your
dealer resets it after completing the
required maintenance service. This
indicator comes on when there
is a system message in the multi-
information display. Press the INFO
button on the steering wheel (see
page ) to see the message (see
page ).
This indicator comes on when the
washer fluid level is low. Add washer
fluid when you see this indicator
(see page ).
Most
of the time, this indicator
comes on along with other indicato rs
in the instrument panel such as the
seat belt reminder indicator, SRS
indicato r, VSA system indicato r, etc. Your
vehicle has a door and tailgate
open monitor on the information
display. If any door(s) or the tailgate
is not closed tightly, the appropriate
light/lights will come on to reminds
you to close the tailgate or the
door(s).
The door and tailgate open monitor
appears on the multi-inf ormation
display (see page ).
79
330
35384
86
On RDX model only
On RDX with Technology Package
model only
Canadian RDX model only On RDX with Technology Package
model only
On RDX model
Instrument Panel Indicators
Maintenance Minder
Indicator
System Message
Indicator
Washer Level IndicatorDoor and T ailgate Open Monitor
74
——
y

y
() yy