2007.5 Peugeot 307 key
[x] Cancel search: keyPage 133 of 212
10PRACTICAL INFORMATION
123
Alloy wheel bolts are covered by
chrome trims.
Use the yellow tool 6 to remove the
trims before slackening the bolts. Wheel with centre trim
F i t t i n g s n o w t y r e s
I f y o u i t s n o w t y r e s m o u n t e d o n
steel wheels onto your vehicle, it
is essential to use special bolts
available from your PEUGEOT
dealer.
slide the trim remover 7 into the
notch of the centre trim,
use the trim remover as a lever
pressing on the trim to unclip it,
unscrew the bolt using the anti-
theft socket and the wheelbrace.
I f y o u r v e h i c l e i s i t t e d w i t h a s t e e l
s p a r e w h e e l , w h e n i t t i n g i t , i t i s
normal when tightening the bolts to
notice that the washers do not come
into contact with the rim. The spare
wheel is secured by the cone shape
of each bolt.
This anti-theft socket was
given to you on delivery
of your vehicle along with
the duplicate keys and the
c o n i d e n t i a l c a r d .
Make a careful note of the code
number engraved on the head of the
anti-theft socket. This will enable you
to obtain a duplicate socket from a
PEUGEOT dealer.
S p e c i a l f e a t u r e s o f a l l o y w h e e l s
Fitting the spare wheel
A n t i - t h e f t b o l t s
Y o u r w h e e l s a r e i t t e d w i t h a n a n t i -
theft bolt, one per wheel.
Bolt covers
Wheel with chrome trim
remove the chrome trim,
unscrew the bolt using the anti-
theft socket and the wheelbrace.
Page 137 of 212
10PRACTICAL INFORMATION
123
Alloy wheel bolts are covered by
chrome trims.
Use the yellow tool 6 to remove the
trims before slackening the bolts. Wheel with centre trim
F i t t i n g s n o w t y r e s
I f y o u i t s n o w t y r e s m o u n t e d o n
steel wheels onto your vehicle, it
is essential to use special bolts
available from your PEUGEOT
dealer.
slide the trim remover 7 into the
notch of the centre trim,
use the trim remover as a lever
pressing on the trim to unclip it,
unscrew the bolt using the anti-
theft socket and the wheelbrace.
I f y o u r v e h i c l e i s i t t e d w i t h a s t e e l
s p a r e w h e e l , w h e n i t t i n g i t , i t i s
normal when tightening the bolts to
notice that the washers do not come
into contact with the rim. The spare
wheel is secured by the cone shape
of each bolt.
This anti-theft socket was
given to you on delivery
of your vehicle along with
the duplicate keys and the
c o n i d e n t i a l c a r d .
Make a careful note of the code
number engraved on the head of the
anti-theft socket. This will enable you
to obtain a duplicate socket from a
PEUGEOT dealer.
S p e c i a l f e a t u r e s o f a l l o y w h e e l s
Fitting the spare wheel
A n t i - t h e f t b o l t s
Y o u r w h e e l s a r e i t t e d w i t h a n a n t i -
theft bolt, one per wheel.
Bolt covers
Wheel with chrome trim
remove the chrome trim,
unscrew the bolt using the anti-
theft socket and the wheelbrace.
Page 148 of 212
10PRACTICAL INFORMATION
S p e c i a l f r o n t w i n d s c r e e n
wiper position
Within one minute of switching off
the ignition, operate the wipers
stalk to position the wiper blades
in the centre of the windscreen
(maintenance position).
C h a n g i n g a w i p e r b l a d e
Lift the wiper arm, then unclip the
blade and remove it.
Fit the new blade and push back
the arm.
Note: t h e s h o r t e s t b l a d e i s i t t e d o n
the vehicle’s right-hand windscreen
wiper arm.
T o r e t u r n t h e w i n d s c r e e n w i p e r s
t o t h e i r n o r m a l p o s i t i o n , s w i t c h o n
t h e i g n i t i o n a n d o p e r a t e t h e w i p e r
stalk.
BATTERY
T o c h a r g e t h e b a t t e r y u s i n g a
b a t t e r y c h a r g e r :
- Disconnect the battery starting
with the negative (-) terminal,
- Follow the instructions for use given by the battery charger
manufacturer,
- Check that the terminals and connectors are clean; if they are
covered with sulphate (white or
greenish deposit), disconnect
them and clean them,
- Reconnect the battery starting with the negative (-) terminal. Before disconnecting the
battery, you must wait for
2 minutes after switching off
the ignition.
Never disconnect a terminal when
the engine is running.
N e v e r c h a r g e a b a t t e r y w i t h o u t i r s t
disconnecting the terminals.
Close the windows and sunroof
before disconnecting the battery.
If they do not operate normally
following reconnection of the
battery, they must be reinitialised
(see sections "Reinitialisation of the
electric windows" and "Sunroof").
After every reconnection of the
battery, switch on the ignition and
wait 1 minute before starting to
allow the electronic systems to be
i n i t i a l i s e d . I f s l i g h t d i f i c u l t i e s a r e
experienced after this, please contact
a PEUGEOT dealer.
Following disconnection of the battery,
the remote control key and the GPS
satellite navigation system must
be reinitialised (see corresponding
section).
I t i s a d v i s a b l e t o d i s c o n n e c t t h e
b a t t e r y i f t h e v e h i c l e i s n o t t o b e
u s e d f o r a p e r i o d o f m o r e t h a n
one month.
T o s t a r t t h e v e h i c l e f r o m a n o t h e r
b a t t e r y :
- Connect the red cable to the positive (+) terminals of the two
batteries,
- Connect one end of the green or black cable to the negative (-)
terminal of the slave battery,
- Connect the other end of the green or black cable to an earth point on
the broken down vehicle as far as
possible from the battery,
-
Operate the starter, let the engine run,
- Wait for the engine to return to idle, then disconnect the cables. The batteries contain harmful
substances such as sulphuric
acid and lead. They must be
disposed of in accordance
with regulations and must never be
discarded with household waste.
Take used remote control and vehicle
batteries to an approved collection
point.
C H A N G I N G A W I N D S C R E E N
W I P E R B L A D E
Page 171 of 212
156
S
O S
SOURCE
MODE BAND ESC
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
7
pqrs
0 # MENU LIST
TA
PTY
DARK
2
1
5
3 4
8 9 10 15
11 17 18
12 16
14
7
6
13
01
1. Ejection of the CD.
2. Selection of the source: radio, Jukebox, CD, CD ch anger
a n d a u x i l i a r y ( A U X , i f a c t i v a t e d o n t h e C o n i g u r a t i o n m e n u ) .
Long press: CD copy to hard disc.
3. Long press on the SOS button: emergency call.
4. Selection of the display on the screen from the mo des:
TRIP, TEL, NAV and AUDIO.
5. M o d i i c a t i o n o f t h e s c r e e n d i s p l a y .
Long press: reinitialisation of the RT4 GPS audio/ telephone.
6. On/Off and Volume adjustment.
7. Selection of the wavebands FM1, FM2, FMast, AM. 8.
T A ( T r a f i c A n n o u n c e m e n t ) f u n c t i o n o n / o f f .
L o n g p r e s s : a c c e s s t o t h e P T Y ( r a d i o P r o g r a m m e T Y p e s )
mode.
9 . Access to the "PEUGEOT" services menu.
10. Cancellation of the current operation.
Long press: return to the current application.
11. Automatic search for a lower/higher frequency.
Selection of the previous/next CD, MP3 or Jukebox t rack.
12. Displaying of the general menu.
13. Keypad for entering descriptions by successive pre sses.14.
Selection of the previous/next CD.
Selection of the previous/next MP3/Jukebox director y.
15. Audio option adjustments: front/rear, left/right b alance,
loudness, sound ambiences.
16. S e l e c t i o n a n d c o n i r m a t i o n .
17. SIM card slot.
18. Displaying of the list of local radio stations, of the tracks on
the CD or of the MP3/Jukebox directories.
Long press: updating of the local radio stations.
FIRST STEPS
Page 174 of 212
159
9
11
12
14
10
13
ESC
MENU LIST
2abc5jkl8tuv
3def6mno9wxyz
1 4ghi r7pq s0#
ESC
MENU LIST
ESC
MENU LIST
ESC
MENU LIST
ESC
MENU LIST
P r e s s t h e d i a l t o c o n i r m t h e s e l e c t i o n .
Turn the dial and select the letters of
t h e t o w n o n e b y o n e c o n i r m i n g e a c h
time by pressing the dial.
Select OK and press the dial to
c o n i r m .
To speed up the process, the POST CODE can be
entered instead of the name of the town.
Use the alphanumeric keypad to enter the letters an
d
digits and "*" to correct. P r e s s t h e d i a l t o c o n i r m t h e s e l e c t i o n .Select OK on the
ENTER AN ADDRESS page.
Repeat steps 8 to 12 for the ROAD and N° functions.
OK
OK
Select the STORE function to record the address ent
ered in a
d i r e c t o r y r e c o r d a n d p r e s s t h e d i a l t o c o n i r m t h e s e l e c t i o n .
T h e p o i n t s o f i n t e r e s t ( P O I ) i n d i c a t e a l l o f t h e s e r v i c e l o c a t i o n s i n t h e
v i c i n i t y ( h o t e l s , v a r i o u s b u s i n e s s e s , a i r p o r t s . . . ) .
STORE
PARIS
POI
Page 186 of 212
171
ESC
MENU LIST
ESC
MENU LIST
6
7
5
ESC
LIST
MENU
MENU
ESC
MENU LIST
2
3
4
1
ESC
MENU LIST
ESC
MENU LIST
ESC
MENU LIST
ESC
MENU LIST
JUKEBOX
RENAME
JUKEBOX MANAGEMENT
RENAMING AN ALBUM
Press the MENU button.
Select AUDIO FUNCTIONS and
p r e s s t h e d i a l t o c o n i r m .
Select the JUKEBOX function and
p r e s s t h e d i a l t o c o n i r m .
Select the JUKEBOX MANAGEMENT
f u n c t i o n a n d p r e s s t h e d i a l t o c o n i r m . Select the album to be renamed and
p r e s s t h e d i a l t o c o n i r m .
Select the RENAME tab and press the
d i a l t o c o n i r m .
Turn the dial and select the letters of
t h e a l b u m t i t l e o n e b y o n e c o n i r m i n g
each time by pressing the dial.
Use the alphanumeric keypad to enter the letters of the album title
one by one.
JUKEBOX FUNCTION
Page 188 of 212
173
1
SOURCE
2
S
O S SOURCE
MODE BAND T
PTA YDARK
SOURCE
2abc5jkl8tuv
3def6mno9wxyz
1 4
ghi7pqrs
0 #
2abc5jkl8tuv
3def6mno9wxyz
1 4ghir7pq s0 #
S
O S SOURCE
MODE BAND T
PTA YDARK
SOURCESOURCE
ESC
MENU LIST
1
3
2Press the MENU button then select the CONFIGURATION
function,
then SOUNDS, then ACTIVATE AUXILIARY SOURCE to acti vate
the auxiliary input of the RT4 GPS audio/telephone.
Connect the portable equipment (MP3
p l a y e r … ) t o t h e a u d i o s o c k e t s ( w h i t e a n d
r e d , R C A t y p e ) l o c a t e d i n t h e g l o v e b o x
using a JACK/RCA audio cable.
Press the SOURCE button several
times in succession and select AUX. Insert one or more CDs in the
changer.
Press the SOURCE button several
times in succession and select CD
CHANGER.
Press one of the buttons on the
alphanumeric keypad to select the
corresponding CD.
Press one of the buttons to select a
track on the CD.
The displaying and management of the commands takes place via
the portable equipment.
I t i s n o t p o s s i b l e t o c o p y t h e i l e s o n t o t h e h a r d d i s c f r o m t h e a u x i l i a r y
input. I t i s n o t p o s s i b l e t o c o p y t h e i l e s o n t o t h e h a r d d
i s c f r o m t h e
CD changer.
USING THE AUXILIARY INPUT (AUX)
JACK/RCA AUDIO CABLE NOT SUPPLIED
CD CHANGER
PLAYING A CD (NOT MP3 COMPATIBLE)
Page 189 of 212
174
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
7
pqrs
0 #
ESC
MENU LIST
ESC
MENU LIST
ESC
MENU LIST
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
7
pqrs
0 #
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
r
7
pq s
0
#
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
r
7
pq s
0
#
1
2
3 1
2
06
TELEPHONE
INSTALLING YOUR SIM CARD ENTERING THE PIN CODE
Access the slot by pressing the button
using the tip of a pen.
Install the SIM card
in the holder and
then insert it in the
slot.
To remove the SIM card, repeat step 1.
Your SIM card must be installed and removed with th e RT4 GPS
audio/telephone switched off and the ignition off. Enter the PIN code on the keypad.
C o n i r m t h e P I N c o d e b y p r e s s i n g
button #.
PIN CODE
When entering your PIN code, tick the STORE PIN tab to gain
access to the telephone without having to enter thi s code when it is
used subsequently.
(NOT SUPPLIED)