Page 14 of 444
LOCATION OF THE WARNING AND
SPECIFICATION LABELS ..................1-1
SAFETY INFORMATION ..................... 2-1
DESCRIPTION AND MACHINE
IDENTIFICATION ............................... 3-1
Identification number records ............. 3-3
Key identification number ................... 3-5
Vehicle identification number ............. 3-5
Model label ......................................... 3-7
CONTROL FUNCTIONS ...................... 4-1
Main switch ......................................... 4-1
Indicator and warning lights ................ 4-3
Handlebar switches ............................ 4-7
Throttle lever .................................... 4-11
Speed limiter .................................... 4-13
Clutch lever ...................................... 4-15
Brake lever ....................................... 4-17Brake pedal ...................................... 4-17
Parking brake lever .......................... 4-19
Shift pedal ........................................ 4-21
Fuel tank cap .................................... 4-21
Fuel cock .......................................... 4-23
Starter (choke) ................................... 4-25
Seat .................................................. 4-27
Front shock absorber adjustment ..... 4-29
Rear shock absorber adjustment ..... 4-39
PRE-OPERATION CHECKS ................ 5-1
Front and rear brakes ......................... 5-7
Fuel .................................................. 5-13
Engine oil .......................................... 5-17
Coolant ............................................. 5-19
Chain ................................................ 5-21
Throttle lever .................................... 5-21
Tires ................................................. 5-23
How to measure tire pressure .......... 5-27
Tire wear limit ................................... 5-29
Fittings and fasteners ....................... 5-29
EBU00150
CONTENTS
1
2
3
4
5
5TG-9-62 1-3 5/13/05 10:06 AM Page 12
Page 16 of 444
Carburetor adjustment ...................... 8-75
Idle speed adjustment ...................... 8-77
Valve clearance adjustment ............. 8-77
Throttle lever adjustment .................. 8-79
Front brake pad inspection ............... 8-81
Rear brake pad inspection ............... 8-83
Brake fluid level inspection ............... 8-85
Brake fluid replacement .................... 8-91
Front brake lever free play ............... 8-93
Brake pedal height adjustment ......... 8-95
Parking brake adjustment ................. 8-97
Adjusting the rear brake light switch.... 8-101
Clutch lever free play adjustment .... 8-103
Drive chain slack check .................. 8-105
Adjusting the drive chain slack ....... 8-107
Lubricating the drive chain ............. 8-111
Cable inspection and lubrication .... 8-115
Brake pedal, brake lever and
clutch lever lubrication .................. 8-117
Front upper and lower arm pivot
lubrication ..................................... 8-121Rear arm pivot lubrication .............. 8-123
Wheel removal ............................... 8-125
Wheel installation ........................... 8-127
Battery ............................................ 8-129
Battery maintenance ...................... 8-133
Fuse replacement ........................... 8-135
Replacing a headlight bulb ............. 8-137
Headlight beam adjustment ............ 8-143
Tail/brake light ................................ 8-143
Troubleshooting .............................. 8-145
Troubleshooting chart ..................... 8-149
CLEANING AND STORAGE ................ 9-1
A. CLEANING ..................................... 9-1
B. STORAGE ..................................... 9-7
SPECIFICATIONS .............................. 10-1
Conversion table ................................. 11-1
9
10
11
5TG-9-62 1-3 5/13/05 10:06 AM Page 14
Page 52 of 444
3-1
EBU00320
DESCRIPTION AND MACHINE
IDENTIFICATION
1. Seat 11. Tail/brake light
2. Fuel tank cap 12. Coolant reservoir
3. Radiator cap 13. Shift pedal
4. Oil filter element 14. Engine oil tank
5. Brake pedal 15. Clutch lever
6. Headlights 16 Handlebar switches
7. Fuel cock 17. Parking brake lever
8. Starter (choke) 18. Main switch
9. Throttle stop screw 19. Throttle lever
10. Fuse 20. Brake lever
NOTE:
The machine you have purchased may differ
slightly from those shown in the figures of this
manual.
5TG-9-62 1-3 5/13/05 10:06 AM Page 3-1
Page 78 of 444
4-19
1. Parking brake lever (Locked position)1. Levier de frein de stationnement (frein serré)1. Palanca del freno de estacionamiento (posición de bloqueo)
1. Parking brake lever (Unlocked position)
1. Levier de frein de stationnement (frein relâché)1. Palanca del freno de estacionamiento
(posición de desbloqueo)
EBU14072
Parking brake lever
Use the parking brake when you have to start
the engine or park the machine, especially on a
slope. To apply the parking brake, move the
parking brake lever in direction
a. To release
the parking brake, move the parking brake lever
in direction b.
w
8Always set the parking brake before start-
ing the engine. The ATV could start mov-
ing unexpectedly if the parking brake is
not applied. This could cause loss of con-
trol or a collision.
8Always be sure you have released the
parking brake before you begin to ride.
The brake could overheat if you ride the
ATV without releasing the parking brake.
You could lose braking performance
which could cause an accident. You could
also wear out the brakes prematurely.
5TG-9-62 4 5/12/05 5:18 PM Page 4-19
Page 112 of 444
5-1
EBU01130
PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Front brake9Check operation lever, free play, fluid level and fluid leakage. 5-7–5-11, 8-81,
9Fill with DOT 4 brake fluid if necessary. 8-85–8-91
Rear brake9Check operation, fluid level and fluid leakage. 5-7–5-11
9Fill with DOT 4 brake fluid if necessary. 8-83–8-89, 8-93
Clutch9Check operation, condition and lever free play. 8-103
Parking brake9Check operation, condition and cable length. 8-97–8-99
Fuel 9Check fuel level.
9Fill with fuel if necessary.5-13–5-15
Engine oil9Check oil level.
9Fill with oil if necessary.5-17, 8-25–8-41
Coolant reservoir 9Check coolant level in reservoir.
9Fill with coolant if necessary.5-19–5-21, 8-43–8-53
Drive chain9Check chain slack and condition.
9Adjust if necessary.5-21, 8-105–8-113
Throttle9Check for proper throttle cable operation and free play. 5-21, 8-79
Wheels and tires9Check tire pressure, wear and damage. 5-23–5-29, 8-125–8-127
Fittings and fasteners9Check all fittings and fasteners. 5-29
Lights and switches9Check for proper operation. 5-29, 8-99, 8-137–8-141
5TG-9-62 5-6 5/13/05 1:45 PM Page 5-1
Page 144 of 444
6-3
EBU14120
Starting a cold engine
w
Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or
do not work smoothly, you could be unable
to control the ATV, which could lead to an
accident or collision.
1. Apply the parking brake.
2. Turn the fuel cock to “ON”.
3. Turn the main switch to “ON” and the
engine stop switch to “RUN”.
4. Shift the transmission into neutral.
5TG-9-62 5-6 5/13/05 1:45 PM Page 6-3
Page 154 of 444
6-13
EBU14260
To start out and accelerate:
1. Release the throttle lever, and then release
the parking brake.
cC
Always close the throttle while shifting
gears. Otherwise, damage to the engine and
drive train may result.
2. Pull the clutch lever to disengage the
clutch.
3. Shift into first gear.
4. Open the throttle gradually and at the
same time, release the clutch lever slowly.
5. Once the machine has attained adequate
speed, release the throttle, and at the
same time, quickly pull in the clutch lever.
5TG-9-62 5-6 5/13/05 1:45 PM Page 6-13
Page 164 of 444
6-23
1. Locked position1. Verrouillé1. Posición bloqueada
EBU02111
Parking
When parking, stop the engine and shift into first
gear. Turn the fuel cock to “OFF” and apply the
parking brake.
5TG-9-62 5-6 5/13/05 1:45 PM Page 6-23
