2006 YAMAHA TTR50 service

1P6-F8199-80
TT-R50E
TT-R50EV
OWNER’S SERVICE MANUAL
MANUEL D’ATELIER DU PROPRIETAIRE
FAHRER- UND
WARTUNGS-HANDBUCH
PRINTED IN CHINA
2005.03-0.3 ×1 CR
(E,F,G)
TT-R50
E/
TT-R50E
V
YAMAHA MOTOR CO., LTD.

EC010000
TT-R50E/TT-R50EV
OWNER’S SERVICE MANUAL
©2005 by Yamaha Motor Co., Ltd. 1st Edition, February 2005
All rights reserved. Any reprinting or
unauthorized use without the written
permission of Yamaha Motor Co., Ltd. is expressly prohibited.
Printed in China

ILLUSTRATED SYMBOLS
(Refer to the illustration)
Illustrated symbols 1 to 6 are designed as
thumb tabs to indicate the chapter ’s number
and content.
1 General information
2 Specifications
3 Regular inspection and adjustments
4 Engine
5 Chassis
6 Electrical
Illustrated symbols
7 to D are used to identify
the specifications appearing in the text.
7 With engine mounted
8 Special tool
9 Filling fluid
0 Lubricant
A Tightening
B Specified value, Service limit
C Engine speed
D Resistance (
Ω), Voltage (V), Electric current (A)
Illustrated symbols
E to H in the exploded
diagram indicate grade of lubricant and loca-
tion of lubrication point.
E Apply engine oil
F Apply molybdenum disulfide oil
G Apply lightweight lithium-soap base grease
H Apply molybdenum disulfide grease
Illustrated symbols
I to J in the exploded
diagrams indicate where to apply a locking
agent and when to install new parts.
I Apply locking agent (LOCTITE®)
J Use new one
12
34
56
78
90
AB
CD
E

F
G
H
IJ
GEN
INFOSPEC
INSP ADJ
ENG
CHAS–+ELEC
T R..
EM
LSM
LTNew

SYMBOLE
(Siehe Abbildung.)
Die Symbole 1 bis 6 werden verwendet, um
die Nummer und den Inhalt eines Kapitels
anzuzeigen.
1 Allgemeines
2 Technische Daten
3 Regelm
äßige Wartungs- und Einstellarbeiten
4 Motor
5 Fahrwerk
6 Elektrische Anlage
Die Symbole
7 bis D weisen auf folgende
wichtigen Angaben im Text hin.
7 Arbeit mit montiertem Motor
8 Spezialwerkzeug
9 Art und Menge einzuf
üllender Fl üssigkeiten
0 Schmiermittel
A Anzugsmoment
B Soll- und Grenzwerte
C Motordrehzahl
D Widerstand (
Ω), Spannung (V), Stromst
ärke (A)
Die Symbole E bis H in den Explosionszeich-
nungen weisen auf die Schmiermittel und
Schmierstellen hin.
E Motor
öl auftragen
F Molybd
ändisulfid öl auftragen
G Leichtes Lithiumseifenfett auftragen
H Molybd
ändisulfidfett auftragen
Die Symbole I und J werden ebenfalls in
den Explosionszeichnungen verwendet und
weisen auf Stellen hin, die respketive mit Kle-
bemittel oder neuen Bauteilen zu versehen
sind.
I Klebemittel (LOCTITE®) auftragen
J Erneuern
SYMBOLES GRAPHIQUES
(Voir l
’illustration)
Les symboles graphiques 1 à 6 servent à rep érer
les diff érents chapitres et à indiquer leur contenu.
1 Renseignements g
én éraux
2 Caract
éristiques
3 Contr
ôles et r églages p ériodiques
4 Moteur
5 Ch
âssis
6 Partie
électrique
Les symboles graphiques 7 à D permettent
d ’identifier les caract éristiques apparaissant dans le
texte.
7 Moteur mont
é
8 Outil sp
écial
9 Liquide de remplissage
0 Lubrifiant
A Serrage
B Valeur sp
écifi ée, limite de service
C R
égime du moteur
D R
ésistance (
Ω), tension (V), intensit
é (A)
Les symboles graphiques E à H utilis és dans les
vues en éclat é indiquent les endroits à lubrifier et le
type de lubrifiant à utiliser.
E Appliquer de l
’huile moteur
F Appliquer de l
’huile au bisulfure de molybd ène
G Appliquer de la graisse fluide
à base de savon au
lithium
H Appliquer de la graisse au bisulfure de molybd
ène
Les symboles graphiques I à J dans les vues en
é clat é indiquent o ù appliquer un agent de blocage et
les pi èces à remplacer.
I Appliquer un agent de blocage (LOCTITE®)
J Utiliser une pi
èce neuve

3 - 2
INSPADJ
MAINTENANCE INTERVALS
* : Since these items requires special tools data and technical skills, they should be serviced.
NOTE:
The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
20 Sidestand pivot Check operation.
Apply lithium soap based grease lightly.
√

√
21 * Front fork Check operation and for grease leakage.
Replace if necessary.
√

√
22 * Shock absorber
assembly Check operation and for oil leakage.
Replace if necessary.
√

√
23 * Control cables Apply Yamaha chain and cable lube or engine oil
10W-30 thoroughly.
√

√
√
24 * Throttle grip hous-
ing and cable Check operation and free play.
Adjust the throttle cable free play if necessary.
Lubricate the throttle grip housing and cable.
√

√
√
25 * Chassis fasteners Check all chassis fitting and fasteners.
Correct if necessary.
√

√
√
26 Battery Check terminal for looseness and corrosion. √
No. ITEM
CHECKS AND
MAINTENANCE JOBS WHICH-
EVER
COMES FIRST INITIAL EVERY
month 1 6 12
hours 30 60 120
1
2
3
4
5
6

–+ELEC
6 - 20
MAINTENANCE RECORD
MAINTENANCE RECORD
Copies of work orders and/or receipts for parts you purchase and install will be required to docu-
ment maintenance done in accordance with the emission warranty. The chart below is printed only
as a reminder to you that the maintenance work is required. It is not acceptable proof of mainte-
nance work.
MAINTE-NANCE
INTERVAL DATE OF
SERVICE MILEAGESERVICING DEALER
NAME AND ADDRESS REMARKS
1 Month
6 Months
12 Months
18 Months
24 Months
30 Months
36 Months
42 Months
48 Months
54 Months
60 Months
66 Months

1P6-F8199-80
TT-R50E
TT-R50EV
OWNER’S SERVICE MANUAL
MANUEL D’ATELIER DU PROPRIETAIRE
FAHRER- UND
WARTUNGS-HANDBUCH
PRINTED IN CHINA
2005.03-0.3 ×1 CR
(E,F,G)
TT-R50
E/
TT-R50E
V
YAMAHA MOTOR CO., LTD.