2006 YAMAHA RHINO 660 Switch

5-27
EVU00490
Switches
Check the operation of all switches. Have a
Yamaha dealer repair as necessary for proper op-
eration.
EE.book Page 27 Monday, July 11, 2005 2:32 PM

8-97 1. Brake light switch 2. Adjusting nut
1. Contacteur de feu stop 2.Écrou de réglage
1. Interruptor de la luz de freno 2. Tuerca de ajuste
EVU00880
Brake light switch adjustment
The brake light switch, which is activated by the
brake pedal, is properly adjusted when the brake
light comes on just before braking takes effect. If
necessary, adjust the brake light switch as follows.
1. Open the hood. (See pages 8-17–8-19 for
hood opening and closing procedures.)
2. Turn the adjusting nut while holding the brake
light switch in place. To make the brake light
come on earlier, turn the adjusting nut in di-
rection
a. To make the brake light come on
later, turn the adjusting nut in direction
b.
3. Close the hood.
EE.book Page 97 Monday, July 11, 2005 2:32 PM

8-113 1. Battery compartment cover
1. Couvercle du compartiment de la batterie
1. Tapa del compartimento de la batería
EVU01510
Fuse replacement
The main fuse and the fuse box are located under
the hood. (See pages 8-17–8-19 for hood opening
and closing procedures.)
If a fuse is blown, turn off the main switch and in-
stall a new fuse of the specified amperage.
If a fuse is blown, replace it as follows.
1. Remove the battery compartment cover by
lifting it up and pulling it out.
2. Turn the key to “OFF” and turn off the electri-
cal circuit in question.CAUTION:_ To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse. _
EE.book Page 113 Monday, July 11, 2005 2:32 PM