2006 TOYOTA PRIUS bluetooth

230
27p320
2. Use the software keyboard to inputthe device name.
Changing the Bluetooth settings
You can change the display and settings
of Bluetooth information on the system.
The information displays the following
items.
Device Name the name in the . .
Bluetooth network. You
can change it.
Passkey the password when you . . . . . . .
register your cellular
phone in the system. You
can change it into the
figure of 4 −8 digits.
Bl uet oot h D ev i c e A ddr es s . . . . . . . . . . . . . . . the address peculiar to
the system. You can not
change it. If you have
registered two Bluetooth
phones with the same
Device Name or Passkey
and you cannot
distinguish one from the
other, refer to it. When you change the device name or
Passkey, do the following.
27p321
1. Touch the “Bluetooth” switch.

232
27p325
5. When you complete the setting,touch “
”.
Initializing the Bluetooth settings.
You can initialize the settings.
27p326
1. Touch the “Default” switch.
27p327
2. Touch the “Yes” switch.

233

Deleting a Bluetooth phone
27p328
1. Touch the “Delete” switch of “Blue-
tooth Telephone”.
27p329
2. Select the telephone you want to de-lete and touch “OK”.
27p330
3. Touch the “Yes” switch.

234
When you delete the telephone while
another Bluetooth phone is connected,
this message is displayed.
27p331
Touch the “Yes” switch.
Displaying the information of the
Bluetooth phone you delete
You can display the information of the
Bluetooth phone before you delete it
and you can make sure whether the
telephone you delete is correct or not.
27p332
1. Select the telephone you want to display the information about.
27p319
2. When you complete confirming it,
touch “
”.