2006 TOYOTA PRIUS ad blue

178
Connecting a Bluetooth phone
(a) automatically
27p188
When you register your phone, auto
connection will be turned on. Always
set it to this mode and leave the Blue-
tooth phone in a condition where con-
nection can be established.
Each time you touch the “Auto Connect”
switch, auto connection will be switched
on or off.
27p189
When the “ACC” or “IGON” mode is
enabled, the selected Bluetooth phone
will be automatically connected and the
connection result is displayed.
This screen appears when the Bluetooth
phone is first connected after the “ACC”
or “IG −ON” mode is enabled. (b) manually
When the auto connection failed or
turned off, you have to connect Blue-
tooth manually.
27p190
Touch the “Connect” switch after hav-
ing enabled the Bluetooth connection
on the phone.

179
27p191
When the connection is completed, this
screen is displayed.
Now you can use the Bluetooth phone.
Reconnecting the Bluetooth phone
If the Bluetooth phone is disconnected
with a poor reception from the Blue-
tooth network when the “ACC” or “IG
ON” mode is enabled, the system auto-
matically reconnects the Bluetooth
phone. In this case, the connection
result is not displayed.
If the Bluetooth is disconnected on pur-
pose such as you turned your cellular
phone off, this does not happen. Recon-
nect it by the following methods.
Select the Bluetooth phone again.
Enter the Bluetooth phone.
(b)Calling on the Bluetooth phone
After you enter the Bluetooth phone,
you can call by using handsfree sys-
tem. You can call using the 7 methods
described below.
(i) By dial
You can call by inputting the telephone
number.
This cannot be operated while you are
driving.
27p192
Touch the desired key to input the tele-
phone number.

187
(vii) By POI call (with Navigation System)
27p207
You can call by touching “” when it
is displayed on the screen from Naviga-
tion system. (See the separate “Navi-
gation System Owner ’s Manual” for de-
tails.)
(c) Receiving on the Bluetooth
phone
27p208
When a call is received, this screen is
displayed with a sound. Touch “
”
or push the
button of the steering
wheel to talk on the phone.
To hang up the phone:
Touch “
” or push the button of
the steering wheel again.
To refuse to receive the call: Touch “
” and hold it. To adjust the volume of received call:
Touch “–” or “+” or use the volume
switch of the steering wheel.
On the international phone call, the other
party’s name may not be displayed cor-
rectly depending on the cellular phone
which you have.

190
27p212
2. Touch the desired switch to send atone.
(e) Changing the settings of the
Bluetooth phone
27p311
Touch the “Settings” switch to display
“Settings” screen.
27p214
You can change the settings of the
phone.

202
Auto answer
When a call is received, the display
automatically changes to the talking
screen and you can start to talk on the
phone (without touching any switch) af-
ter the preset time.
27p246
Touch the “ON” switch of “Auto An-
swer” and “” or “+” switch to adjust
the waiting time of auto answer within
1 60 seconds.
The Bluetooth connection status at
startup
27p189
When you turn the “POWER” switch to
“ACC” or “IGON” and the Bluetooth is
automatically connected, the connection
check is displayed.
27p247
Touch the “ON” or “OFF” switch of
Show Bluetooth connection status at
startup.

204
27p251
You can do the detailed settings of
phone book.
Transferring a telephone number
You can transfer the telephone numbers
in your Bluetooth phone to the system.
Up to 1000 person’s data (up to 2 num-
bers a person) can be registered in the
phone book.
Transfer it while the engine is running.
27p252
1. Touch the “Transfer Data” switch to display “Select Group” screen.
27p253
2. Select the group you want to trans-
fer the data to.

205
27p254
3. Touch the “Overwrite” or “Add To”switch.
27p255
4. Transfer the phone book data to thesystem using the Bluetooth phone.
This screen appears while transferring.
To cancel it, touch the “Cancel” switch.
If the transferring is interrupted on the
way, the phone book data transferred until
then can be memorized in the system.
27p256
5. When this screen is displayed, the transfer is completed.

226
27p309
2. Input the security code and touch“OK”.
27p310
3. Touch the “Yes” switch.
(f) Setting a Bluetooth phone
Selecting a Bluetooth phone
In case you register more than one
Bluetooth phone, you need to choose a
favorite one.
27p311
1. Touch the “Settings” switch to dis- play “Settings” screen.