2006 TOYOTA LAND CRUISER flat tire

[x] Cancel search: flat tire

Page 255 of 364

TOYOTA LAND CRUISER 2006 J100 Owners Manual 245
Ti r e relat ed ter m
Meaning
Vehicle normal load on the tire
the load on an individual tire that is determined by distributing to each axle
its share of the curb weight, accesso
ry weight, and no

Page 272 of 364

TOYOTA LAND CRUISER 2006 J100 Owners Manual 262
MATCHING TRAILER BALL HEIGHT TO
TRAILER COUPLER HEIGHT
No matter which class of tow hitch ap-
plies, for a safe trailer hookup, the trailer
ball setup on must be the proper height
for the coupler

Page 276 of 364

TOYOTA LAND CRUISER 2006 J100 Owners Manual 266
CAUTION
Do not exceed 72 km/h (45 mph) or
the posted towing speed limit,
whichever is lower. Because insta-
bility (swaying) of a towing vehicle�
trailer combination usually in-
creases as the sp

Page 279 of 364

TOYOTA LAND CRUISER 2006 J100 Owners Manual 269
IN CASE OF AN EMERGENCY
 If your vehicle will not startt270
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
If your engine stalls while driving 274
. . . . . . . . . . . . . .

Page 285 of 364

TOYOTA LAND CRUISER 2006 J100 Owners Manual 275
3. Visually check to see if the enginedrive belt (fan belt) is broken or loose.
Look for obvious coolant leaks from the
radiator, hoses, and under  the vehicle.
However, note that water draining f

Page 286 of 364

TOYOTA LAND CRUISER 2006 J100 Owners Manual 276
CAUTION
When jacking, be sure to observe
the following to reduce the possi-
bility of personal injury:
Follow jacking instructions.
 Do not put any part of your
body under the vehicle sup-
porte

Page 289 of 364

TOYOTA LAND CRUISER 2006 J100 Owners Manual 279
4. After the tire is lowered completelyto the ground, remove the holding
bracket as shown in the illustration.When storing the spare tire, put it in
place with the outer side of the wheel
facing u

Page 292 of 364

TOYOTA LAND CRUISER 2006 J100 Owners Manual 282
When connecting a jack handle exten-
sion with another extension and a jack
handle end, use a jack handle to tight-
en the bolts on the joints as shown
in the illustration. When connecting
the jac
Page:   < prev 1-8 9-16 17-24 25-32 33-40 next >