If and when
212
–Remove plastic cover ⇒page 211, fig. 151 , insert finger in
opening and pull in the direction of the arrow.
– Press the tabs ⇒page 211, fig. 152 of the lamp holder and
remove lampholder.
– Turn bigger lamp 1/4 turn to left. Pull on the small lamp.
– Remove lamp and replace.
– Fit the bigger lamp, pressing inwards and turn 1/4 turn to the right. Place the smaller lamp into the casing and press.
– Carefully fit the lampholder in the casing and press until a “clic” is heard.
– Next replace the cover and press down.
NoteMake sure that when assembling all seals and rubbers are correctly fitted.
Rear lights on frameSide light 2/ Brake light/ Indicator light
–Open the tailgate.
– Separate the trim from the boot
– Press the tab ⇒fig. 153 to release the lamp holder and
remove
– Turn bigger lamp 1/4 turn to left. Pull on the small lamp.
– Remove lamp and replace.
– Fit the bigger lamp, pressing inwards and turn 1/4 turn to the right. Place the smaller lamp in casing and press.
– Position lamp holder towards where the small lamp is housed. Next press until a “click” is heard
AA
AB
Fig. 153 Rear lights on
frame
AA
cordoba_ingles Seite 212 Freitag, 7. Oktober 2005 6:00 18
